Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (208)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(208)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(208)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(208)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(208)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(208)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(208)
- Stainless Steel (208)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(208)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(208)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(208)
- Cast Iron (208)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(208)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(208)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(208)
- Non-Ferrous Materials (208)
- Wrought Aluminum (208)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(208)
- High-Silicon Aluminum Alloys Si >12.2%(93)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (208)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (208)
- Carbon, Graphite Composites, CFRP (208)
- MMC's (93)
- High-Temp Alloys (208)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(208)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(208)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(208)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(208)
- Hardened Materials (208)
- Hardened Materials 44-48 HRC(208)
- Hardened Materials 48-55 HRC(208)
- Hardened Materials 56-60 HRC(118)
- Hardened Materials >60 HRC(118)
Select First Choice
- (8)
- (60)
- (60)
- (29)
- (2)
- (14)
- (98)
Applications
(52)
(75)
(52)
(97)
(52)
(181)
(258)
(181)
(181)
Cutting Condition Material
- (208)
- (208)
- (208)
- (208)
- (208)
- (208)
Cutting Condition
- (208)
- (208)
- (208)
Tool Cutting Edge Angle
to
Connection Style
- (11)
- (139)
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
- (67)
- (176)
- (118)
- (118)
- (118)
- (176)
- (176)
- (176)
- (176)
- (137)
- (176)
- (176)
- (208)
- (208)
- (93)
- (64)
- (157)
- (176)
- (118)
- (137)
- (62)
- (25)
Hand Of Tool
- (86)
- (9)
- (107)
Wiper Insert
- (141)
F Dimension
- 8.17 (1)
- 8.23 (2)
- 9.76 (1)
- 10.23 (1)
- 10.24 (1)
- 12.1 (2)
- 12.17 (2)
- 12.22 (1)
- 12.73 (3)
- 12.74 (2)
- 12.79 (2)
- 12.85 (2)
- 13.03 (2)
- 15.92 (1)
- 15.97 (4)
- 16.02 (1)
- 16.1 (1)
- 16.2 (5)
- 16.22 (2)
- 19.03 (1)
- 19.08 (3)
- 19.101 (1)
- 19.134 (6)
- 19.234 (3)
- 19.253 (2)
- 20.1 (2)
- 20.11 (14)
- 20.19 (7)
- 20.2 (13)
- 20.21 (2)
- 20.3 (2)
- 25.11 (8)
- 25.2 (6)
- 25.21 (4)
- 25.3 (2)
- 25.335 (2)
- 25.4 (1)
- 25.43 (2)
- 25.484 (5)
- 25.485 (2)
- 25.499 (1)
- 25.578 (1)
- 25.584 (3)
- 25.71 (3)
- 27.9 (1)
- 30.4 (1)
- 30.8 (1)
- 33.1 (1)
- 35.1 (1)
- 35.4 (1)
- 38.9 (1)
- 39.1 (1)
to
F Dimension
- 0.3217 (1)
- 0.324 (2)
- 0.3843 (1)
- 0.4028 (1)
- 0.4031 (1)
- 0.4764 (2)
- 0.4791 (2)
- 0.4811 (1)
- 0.5012 (3)
- 0.5016 (2)
- 0.5035 (2)
- 0.5059 (2)
- 0.513 (2)
- 0.6268 (1)
- 0.6287 (4)
- 0.63 (1)
- 0.6307 (1)
- 0.637 (1)
- 0.6378 (4)
- 0.6386 (2)
- 0.7492 (1)
- 0.7512 (3)
- 0.752 (1)
- 0.7533 (6)
- 0.7572 (3)
- 0.758 (2)
- 0.7913 (2)
- 0.7917 (14)
- 0.7949 (7)
- 0.7953 (13)
- 0.7957 (2)
- 0.7992 (2)
- 0.9886 (8)
- 0.9921 (6)
- 0.9925 (4)
- 0.9961 (2)
- 0.9974 (2)
- 1.0 (1)
- 1.0012 (2)
- 1.0033 (7)
- 1.0039 (1)
- 1.007 (1)
- 1.0072 (3)
- 1.0122 (3)
- 1.0984 (1)
- 1.1969 (1)
- 1.2126 (1)
- 1.3031 (1)
- 1.3819 (1)
- 1.3937 (1)
- 1.5315 (1)
- 1.5394 (1)
to
Minimum Bore Diameter
to
Minimum Bore Diameter
to
Minimum Axial Groove Diameter
to
Maximum Axial Groove Diameter
to
Maximum Axial Groove Diameter
- 0.7874 (4)
- 0.8268 (3)
- 0.9055 (1)
- 0.984 (1)
- 0.9843 (5)
- 1.0236 (2)
- 1.063 (9)
- 1.102 (4)
- 1.1024 (3)
- 1.3386 (4)
- 1.339 (3)
- 1.378 (2)
- 1.417 (1)
- 1.4173 (12)
- 1.811 (1)
- 1.8898 (2)
- 2.126 (2)
- 2.2835 (3)
- 2.5197 (2)
- 2.8346 (2)
- 2.9134 (2)
- 3.3071 (2)
- 3.7008 (2)
- 3.937 (4)
- 4.4094 (2)
- 4.8819 (2)
- 5.3543 (2)
- 5.9055 (2)
- 6.2992 (2)
- 7.874 (2)
- 8.3465 (2)
- 10.0 (2)
- 11.811 (6)
- 39.3307 (6)
to
Cutting Direction
- (193)
- (9)
Rake Angle Style
- (27)
- (129)
Maximum Bore Depth
to
Boring Bar Material
- (11)
Front-End
Clamp Style
- (217)
Cutting Width
to
Cutting Width
- 0.078 (39)
- 0.079 (56)
- 0.0807 (56)
- 0.084 (39)
- 0.118 (52)
- 0.119 (40)
- 0.12 (52)
- 0.125 (40)
- 0.128 (40)
- 0.157 (31)
- 0.1575 (29)
- 0.158 (29)
- 0.159 (31)
- 0.187 (29)
- 0.1875 (29)
- 0.19 (29)
- 0.197 (25)
- 0.198 (24)
- 0.199 (25)
- 0.236 (25)
- 0.2382 (25)
- 0.25 (25)
- 0.253 (25)
- 0.311 (13)
- 0.312 (13)
- 0.313 (13)
- 0.315 (13)
- 0.316 (13)
- 0.3169 (13)
- 0.375 (6)
- 0.379 (6)
- 0.394 (6)
- 0.3957 (6)
to
Insert Shape
- (217)
Cartridge Size
- (55)
- (12)
Insert Size
- (4)
- (19)
- (11)
- (20)
- (8)
- (19)
- (1)
- (16)
- (1)
- (19)
- (9)
Minimum Groove Diameter
to
Insert Geometry
Cutting Tool Material
- (118)
- (118)
- (137)
- (93)
- (157)
- (208)
Back-End
Connection Type
- (11)
- (191)