Drill Fix DFSP • Inserts
The Drill Fix DFSP inserts are high-performance inserts for your holemaking operations. The special coatings help chip evacuation, reduce the risk of tool damage, and ensure a smoother drilling process. The positive rake angle of the chipbreaker geometry also reduces cutting forces, which can lead to longer tool life and lower energy consumption. Four cutting edges per insert.
- Steel (101)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(101)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(101)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(101)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(101)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(101)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(89)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(89)
- Stainless Steel (96)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(96)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(96)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(84)
- Cast Iron (84)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(84)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(84)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(84)
- Non-Ferrous Materials (81)
- Wrought Aluminum (81)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(81)
- High-Silicon Aluminum Alloys Si >12.2%(81)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (75)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (75)
- Carbon, Graphite Composites, CFRP (75)
- MMC's (75)
- High-Temp Alloys (81)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(75)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(75)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(81)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(81)
- Hardened Materials (9)
- Hardened Materials 44-48 HRC(9)
- Hardened Materials 48-55 HRC(9)
- Hardened Materials 56-60 HRC(9)
- Hardened Materials >60 HRC(9)
- (25)
- (75)
- (75)
- (57)
- (31)
- (55)
- (75)
(6)
- (19)
- (25)
- (20)
- (26)
- (32)
- (24)
- (14)
- (14)
- (14)
- (12)
- (20)
- (10)
- (10)
- (21)
- (32)
- (32)
- (32)
- (35)
- (26)
- (26)
- (10)
- (10)
- (16)
- (16)
- (28)
- (55)
- (46)
- (12)
- (19)
- (35)
- (35)
- (101)
- (19)
- (25)
- (20)
- (26)
- (32)
- (24)
- (14)
- (14)
- (14)
- (12)
- (20)
- (10)
- (10)
- (21)
- (32)
- (32)
- (32)
- (35)
- (26)
- (26)
- (10)
- (10)
- (16)
- (16)
- (101)
- (27)
- (34)
- (12)
- (36)
- (101)
- (41)
- (68)