SEFAS System
The SEFAS™ combination drilling system allows for centering, drilling, and chamfering in a single operation. The high-performance design and flexibility can be used to adapt the tool for varying hole geometries and provide full through-coolant capabilities. SEFAS chamfering bodies provide additional workpiece and workholding clearance during operations. The chamfer rings can be mounted to Kennametal hydraulic chucks for optimal drill performance and increased productivity. SEFAS chamfering inserts are available and can be used on various materials and with KenTIP™ or KSEM™ drills.
- Steel (49)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(49)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(49)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(49)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(49)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- Stainless Steel (49)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(49)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(49)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(49)
- Cast Iron (49)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(49)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(49)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(49)
- Non-Ferrous Materials (49)
- Wrought Aluminum (49)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(49)
- High-Silicon Aluminum Alloys Si >12.2%(49)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (49)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (49)
- Carbon, Graphite Composites, CFRP (49)
- MMC's (49)
- High-Temp Alloys (49)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(49)
- Hardened Materials (49)
- Hardened Materials 44-48 HRC(49)
- Hardened Materials 48-55 HRC(49)
- Hardened Materials 56-60 HRC(49)
- Hardened Materials >60 HRC(49)
- CFRP Materials (1)
- CFRP, CFRP / CFRP (1)
- CFRP / Aluminium CFRP / Non-Ferrous (1)
- CFRP / Titanium CFRP / High Temp (1)
- CFRP / Stainless Steel (1)
(37)
(37)
- (30)
- (7)
- (37)
- 49.5 (1)
- 50.0 (1)
- 56.5 (1)
- 68.0 (1)
- 70.5 (1)
- 78.0 (1)
- 80.5 (1)
- 82.5 (1)
- 102.0 (1)
- 103.12 (1)
- 103.124 (1)
- 104.902 (1)
- 108.0 (1)
- 109.474 (1)
- 109.538 (1)
- 117.6 (1)
- 122.0 (1)
- 133.0 (1)
- 137.0 (1)
- 141.0 (1)
- 143.0 (1)
- 144.0 (1)
- 146.05 (1)
- 149.352 (1)
- 153.924 (1)
- 155.7 (1)
- 160.27 (1)
- 163.576 (1)
- 163.58 (1)
- 165.1 (1)
- 166.37 (1)
- 166.624 (1)
- 168.275 (1)
- 169.99 (1)
- 184.15 (1)
- 187.325 (1)
- 190.5 (1)
- (49)
- (11)
- (1)
- (12)
- (12)
- (37)