KM80ATC™
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (44)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
- M Stainless Steel (44)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
- K Cast Iron (44)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(44)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(44)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(44)
- N Non-Ferrous Materials (32)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(32)
- N6Carbon, Graphite Composites, CFRP (28)
- N7MMC's (30)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (30)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (30)
- N3High-Silicon Aluminum Alloys Si >12.2%(17)
- N1Wrought Aluminum (32)
- S High-Temp Alloys (42)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(42)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(42)
- H Hardened Materials (27)
- H2Hardened Materials 48-55 HRC(25)
- H3Hardened Materials 56-60 HRC(25)
- H1Hardened Materials 44-48 HRC(27)
- H4Hardened Materials >60 HRC(22)
Applications
Applications
Chamfer Turning (3)
Cut-Off (3)
Deep Grooving (3)
Face Grooving (3)
Facing (30)
Grooving (7)
ID Grooving (4)
ID Thread Turning (4)
Multiple Direction Cutting (25)
OD Thread Turning (7)
Plunge Turning (3)
Profiling (15)
TRN Boring (23)
Turning (36)
Cutting Condition Material
Cutting Condition Material
- H-All (25)
- K-All (42)
- K1 (2)
- M-All (35)
- N-All (30)
- P-All (42)
- S-All (35)
- S2 (16)
- S4 (6)
Type of Thread
Type of Thread
- 60 (7)
- ACME (7)
- API (7)
- API RD (3)
- BSW (3)
- BUTTRESS (7)
- M (3)
- NPT (3)
- STUB ACME (3)
- UN (7)
- UNJ (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (42)
- Interrupted (19)
- Lightly Interrupted Cut (42)
- Smooth Cut (42)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (15)
- 90.0 (13)
- 93.0 (6)
- 95.0 (8)
a
Connection Style
Connection Style
- KM (33)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (25)
- 2.0 (28)
- 4.0 (31)
- 8.0 (27)
a
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.7559 in(15)
- 2.756 in(27)
- 3.1496 in(2)
a
Over All Length [L]
Over All Length [L]
- 70.0 mm(42)
- 80.0 mm(2)
a
Corner Radius
Corner Radius
- 0.002 in(3)
- 0.003 in(7)
- 0.004 in(11)
- 0.005 in(3)
- 0.006 in(7)
- 0.007 in(7)
- 0.008 in(13)
- 0.009 in(3)
- 0.01 in(7)
- 0.011 in(3)
- 0.012 in(3)
- 0.013 in(7)
- 0.014 in(9)
- 0.016 in(13)
- 0.017 in(3)
- 0.018 in(7)
- 0.019 in(1)
- 0.02 in(3)
- 0.023 in(7)
- 0.031 in(24)
- 0.035 in(7)
- 0.039 in(3)
- 0.047 in(24)
- 0.049 in(3)
- 0.059 in(3)
- 0.062 in(5)
- 0.063 in(36)
- 0.069 in(3)
- 0.078 in(3)
- 0.079 in(7)
- 0.089 in(7)
- 0.094 in(32)
- 0.098 in(4)
- 0.125 in(4)
- 0.126 in(12)
- 0.157 in(5)
- 0.197 in(4)
- 0.236 in(4)
- 0.394 in(2)
- 0.492 in(2)
- 0.63 in(2)
a
Corner Radius
Corner Radius
- 0.05 mm(3)
- 0.075 mm(7)
- 0.1 mm(11)
- 0.125 mm(3)
- 0.15 mm(7)
- 0.175 mm(7)
- 0.2 mm(13)
- 0.225 mm(3)
- 0.25 mm(7)
- 0.275 mm(3)
- 0.3 mm(3)
- 0.325 mm(7)
- 0.35 mm(9)
- 0.4 mm(13)
- 0.425 mm(3)
- 0.45 mm(7)
- 0.475 mm(1)
- 0.5 mm(3)
- 0.575 mm(7)
- 0.775 mm(3)
- 0.8 mm(21)
- 0.9 mm(7)
- 1.0 mm(3)
- 1.2 mm(24)
- 1.25 mm(3)
- 1.5 mm(3)
- 1.575 mm(5)
- 1.6 mm(36)
- 1.75 mm(3)
- 1.975 mm(3)
- 2.0 mm(7)
- 2.25 mm(7)
- 2.375 mm(14)
- 2.4 mm(30)
- 2.5 mm(4)
- 3.175 mm(4)
- 3.2 mm(12)
- 4.0 mm(5)
- 5.0 mm(4)
- 6.0 mm(4)
- 10.0 mm(2)
- 12.5 mm(2)
- 16.0 mm(2)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (16)
- 241 (2)
- CG4 (2)
- CL4 (17)
- CM2 (15)
- CM3 (17)
- CM4 (4)
- CM5 (2)
- CPX (21)
- CW2 (4)
- CW2015 (11)
- CW5025 (11)
- GX (15)
- HK1500 (8)
- HT2 (4)
- HTX (2)
- K060 (4)
- K090 (21)
- K1 (18)
- K10M (21)
- K10P (16)
- K10U (8)
- K15U (8)
- K20K (21)
- K21 (13)
- K25M (10)
- K25P (19)
- K2885 (3)
- K313 (30)
- K35P (11)
- K420 (35)
- K45 (6)
- K4H (3)
- K68 (30)
- KB1340 (2)
- KB1345 (11)
- KB1610 (6)
- KB1625 (6)
- KB1630 (13)
- KB5610 (6)
- KB5625 (9)
- KB5630 (6)
- KB9610 (8)
- KB9640 (2)
- KBH10 (8)
- KBH10B (8)
- KBH20 (9)
- KBH20B (8)
- KBK35 (2)
- KC210 (17)
- KC250 (20)
- KC5010 (40)
- KC5025 (28)
- KC5410 (28)
- KC5510 (21)
- KC5525 (6)
- KC710 (9)
- KC720 (20)
- KC722 (9)
- KC725M (17)
- KC730 (28)
- KC7310 (21)
- KC732 (11)
- KC735M (4)
- KC8050 (33)
- KC810 (30)
- KC850 (40)
- KC9010 (23)
- KC9025 (31)
- KC910 (24)
- KC9105 (16)
- KC9110 (44)
- KC9120 (34)
- KC9125 (37)
- KC9140 (31)
- KC9145 (31)
- KC9210 (2)
- KC9215 (21)
- KC9225 (21)
- KC9240 (35)
- KC9240NEW (30)
- KC9245 (21)
- KC9315 (23)
- KC9320 (28)
- KC9325 (21)
- KC935 (33)
- KC950 (33)
- KC990 (26)
- KCD25 (2)
- KCK05 (21)
- KCK05B (21)
- KCK15 (21)
- KCK15B (23)
- KCK20 (32)
- KCK20B (35)
- KCM15 (21)
- KCM15B (16)
- KCM25 (28)
- KCM25B (26)
- KCM35 (21)
- KCM35B (17)
- KCP05 (10)
- KCP05B (13)
- KCP10 (37)
- KCP10B (37)
- KCP25 (37)
- KCP25B (42)
- KCP25C (21)
- KCP30 (33)
- KCP30B (29)
- KCP40 (29)
- KCP40B (29)
- KCPK05 (25)
- KCPK30 (4)
- KCS10 (4)
- KCS10B (21)
- KCU10 (40)
- KCU25 (30)
- KD050 (7)
- KD081 (9)
- KD100 (11)
- KD120 (13)
- KD1400 (6)
- KD1405 (6)
- KD1425 (9)
- KM1 (9)
- KMF (2)
- KS15 (2)
- KT1120 (4)
- KT125 (8)
- KT150 (6)
- KT175 (13)
- KT315 (15)
- KT325 (4)
- KT5020 (2)
- KTP10 (2)
- KU10T (15)
- KU25T (7)
- KU30T (28)
- KY1310 (6)
- KY1320 (16)
- KY1540 (10)
- KY1615 (18)
- KY2000 (12)
- KY2100 (4)
- KY3000 (28)
- KY3400 (17)
- KY3500 (21)
- KY4000 (6)
- KY4300 (12)
- KY4400 (16)
- KYHK15B (16)
- KYK10 (4)
- KYK25 (12)
- KYK35 (21)
- KYS25 (10)
- KYS30 (10)
- MC2 (2)
- NL200 (4)
- NL250 (21)
- NL300 (31)
- NL400 (20)
- NL400S (2)
- NL920 (17)
- P25 (2)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (4)
- SP0819 (19)
- SP3019 (19)
- SP4019 (12)
- SP4036 (2)
- SP4093 (2)
- SPADAP (21)
- SPN4W2 (5)
- THM (16)
- THM-X (2)
- THMF-X (2)
- TN10P (16)
- TN10U (4)
- TN15M (16)
- TN15U (4)
- TN2000 (13)
- TN20K (16)
- TN20P (16)
- TN30M (16)
- TN30P (19)
- TN4000 (13)
- TN5015 (14)
- TN5020 (16)
- TN5105 (2)
- TN5120 (14)
- TN6010 (11)
- TN6025 (9)
- TN7005 (2)
- TN7010 (16)
- TN7015 (26)
- TN7025 (26)
- TN7035 (16)
- TN7105 (2)
- TN7110 (18)
- TN7115 (26)
- TN7125 (26)
- TN7135 (16)
- TN8025 (24)
- TTI15 (2)
- TTM09 (5)
- TTR (4)
- TTR-X (5)
- TTS (13)
- TTX (2)
- W00342 (5)
- WBH10C (4)
- WBH10P (4)
- WBH10U (4)
- WBH20P (4)
- WBH25P (4)
- WBH25U (4)
- WBH30P (4)
- WBK40U (2)
- WBK45U (2)
- WDN00U (2)
- WDN25U (4)
- WK05CT (16)
- WK15CT (2)
- WK20CT (18)
- WM15CT (16)
- WM25CT (21)
- WM35CT (16)
- WP05CT (2)
- WP15CT (28)
- WP25CT (28)
- WP35CT (28)
- WS10PT (16)
- WS25PT (16)
- WU10HT (12)
- WU10PT (8)
- WU20PM (4)
- WU25PT (6)
- X00511 (2)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
- YY72VD (2)
Hand Of Tool
Hand Of Tool
- L (16)
- N (2)
- R (15)
Wiper Insert
Wiper Insert
- N (44)
- Y (17)
F Dimension
F Dimension
- 0.0 mm(2)
- 48.0 mm(8)
- 53.0 mm(23)
a
F Dimension
F Dimension
- 0.0 in(2)
- 1.8898 in(8)
- 2.0866 in(17)
- 2.087 in(6)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(3)
- 41.3 mm(1)
- 47.6 mm(1)
- 57.2 mm(2)
- 88.9 mm(1)
- 106.0 mm(23)
- 139.7 mm(1)
- 174.6 mm(1)
- 209.6 mm(2)
- 222.3 mm(2)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(3)
- 1.626 in(1)
- 1.874 in(1)
- 2.252 in(2)
- 3.5 in(1)
- 4.173 in(23)
- 5.5 in(1)
- 6.874 in(1)
- 8.252 in(2)
- 8.752 in(2)
a
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(7)
a
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(7)
a
Cutting Direction
Cutting Direction
- B (4)
- E (11)
- S (18)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (24)
- NEGATIVE-ZERO (2)
- NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
- 2.756 in(23)
a
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(23)
a
frontEnd
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (4)
- DRILL SHANK 2 FLATS (5)
- END MILL ADAPTER (4)
- ER COLLET CHUCK (2)
- EXTENSION (2)
- REDUCER (5)
- SQUARE SHANK ADAPTER (10)
- WHISTLE DRIVE ADAPTER (2)
- WHISTLE NOTCH ADAPTER (11)
Clamp Style
Clamp Style
- D (8)
- M (23)
- N (7)
- P (6)
Cutting Width
Cutting Width
- 0.0394 in(3)
- 0.047 in(3)
- 0.0472 in(3)
- 0.0591 in(3)
- 0.062 in(3)
- 0.0689 in(3)
- 0.072 in(3)
- 0.078 in(3)
- 0.0787 in(3)
- 0.079 in(1)
- 0.0866 in(3)
- 0.088 in(3)
- 0.0886 in(2)
- 0.094 in(3)
- 0.097 in(3)
- 0.0984 in(3)
- 0.105 in(3)
- 0.108 in(3)
- 0.1083 in(3)
- 0.11 in(3)
- 0.118 in(3)
- 0.1181 in(7)
- 0.122 in(3)
- 0.125 in(7)
- 0.126 in(7)
- 0.128 in(3)
- 0.131 in(1)
- 0.1378 in(7)
- 0.142 in(3)
- 0.156 in(3)
- 0.157 in(3)
- 0.1574 in(7)
- 0.1575 in(7)
- 0.167 in(7)
- 0.1673 in(3)
- 0.169 in(3)
- 0.1771 in(7)
- 0.1772 in(7)
- 0.178 in(3)
- 0.185 in(5)
- 0.188 in(7)
- 0.189 in(7)
- 0.192 in(1)
- 0.193 in(1)
- 0.195 in(3)
- 0.1969 in(4)
- 0.197 in(4)
- 0.202 in(4)
- 0.213 in(4)
- 0.2165 in(4)
- 0.2166 in(2)
- 0.219 in(4)
- 0.2362 in(4)
- 0.25 in(4)
- 0.255 in(4)
- 1.93 in(1)
a
Cutting Width
Cutting Width
- 1.0 mm(3)
- 1.19 mm(2)
- 1.194 mm(3)
- 1.2 mm(3)
- 1.5 mm(3)
- 1.57 mm(3)
- 1.575 mm(3)
- 1.75 mm(3)
- 1.829 mm(3)
- 1.981 mm(3)
- 2.0 mm(3)
- 2.2 mm(3)
- 2.235 mm(3)
- 2.24 mm(1)
- 2.25 mm(2)
- 2.388 mm(3)
- 2.39 mm(2)
- 2.464 mm(3)
- 2.5 mm(3)
- 2.667 mm(3)
- 2.743 mm(3)
- 2.75 mm(3)
- 2.794 mm(3)
- 2.997 mm(3)
- 3.0 mm(7)
- 3.099 mm(3)
- 3.17 mm(3)
- 3.175 mm(7)
- 3.18 mm(2)
- 3.2 mm(7)
- 3.25 mm(3)
- 3.251 mm(3)
- 3.32 mm(1)
- 3.329 mm(1)
- 3.5 mm(7)
- 3.607 mm(3)
- 3.96 mm(3)
- 3.962 mm(3)
- 3.974 mm(1)
- 3.988 mm(3)
- 4.0 mm(7)
- 4.242 mm(7)
- 4.25 mm(3)
- 4.3 mm(3)
- 4.5 mm(7)
- 4.521 mm(3)
- 4.6 mm(1)
- 4.699 mm(5)
- 4.775 mm(7)
- 4.78 mm(2)
- 4.785 mm(2)
- 4.788 mm(2)
- 4.8 mm(3)
- 4.801 mm(7)
- 4.81 mm(3)
- 4.88 mm(1)
- 4.9 mm(1)
- 4.95 mm(3)
- 5.0 mm(4)
- 5.004 mm(4)
- 5.131 mm(4)
- 5.41 mm(4)
- 5.5 mm(4)
- 5.563 mm(4)
- 6.0 mm(4)
- 6.35 mm(4)
- 6.36 mm(2)
- 6.48 mm(4)
a
Front End Type
Front End Type
- KMT - KM Adapter (7)
- MCS - Modular Cartridge System (4)
- SZK - Collet Taper (2)
- VKT - Square Shank (10)
- ZYL - Cylindrical Adapter (22)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (15)
- D-DIAMOND/RHOMBIC 55 (4)
- R-ROUND (6)
- S-SQUARE 90 (10)
- TN-TOP NOTCH (7)
- V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
- KMT00 All KM, except 02,05,09 (7)
- MCS01 Modular Deep Grooving (4)
- SZK02 Collets 8 Degree Taper (2)
- VKT01 Std Design (10)
- ZYL10 Weldon Shank (4)
- ZYL13 2Deg-Whistle Notch (11)
- ZYL56 2Plain Clamp Surf w/Pcs (5)
- ZYL63 2Deg Surf w/Cyl.w/drive (2)
Insert Size
Insert Size
- 3 (3)
- 4 (4)
Gage Length
Gage Length
- 1.4800 in(2)
- 1.6930 in(2)
- 1.7720 in(4)
- 1.8464 in(2)
- 2.3622 in(1)
- 2.5000 in(2)
- 2.5590 in(2)
- 2.5591 in(1)
- 2.6180 in(2)
- 2.9530 in(1)
- 3.1496 in(2)
- 3.1500 in(2)
- 3.3460 in(3)
- 3.5000 in(1)
- 3.5430 in(2)
- 3.5433 in(1)
- 3.8190 in(1)
- 3.9370 in(2)
- 4.1339 in(1)
- 4.1340 in(2)
- 4.3310 in(1)
- 4.5000 in(1)
- 4.5280 in(1)
- 4.7244 in(1)
- 4.9210 in(1)
- 5.0000 in(1)
- 5.5000 in(1)
- 6.2992 in(1)
- 6.5000 in(1)
Gage Length
Gage Length
- 37.6000 mm(2)
- 43.0000 mm(2)
- 45.0000 mm(4)
- 46.9000 mm(2)
- 60.0000 mm(1)
- 63.5000 mm(2)
- 65.0000 mm(3)
- 66.5000 mm(2)
- 75.0000 mm(1)
- 80.0000 mm(4)
- 85.0000 mm(3)
- 88.9000 mm(1)
- 90.0000 mm(3)
- 97.0000 mm(1)
- 100.0000 mm(2)
- 105.0000 mm(3)
- 110.0000 mm(1)
- 114.3000 mm(1)
- 115.0000 mm(1)
- 120.0000 mm(1)
- 125.0000 mm(1)
- 127.0000 mm(1)
- 139.7000 mm(1)
- 160.0000 mm(1)
- 165.1000 mm(1)
Front End Size
Front End Size
- 6.0 in(1)
- 8.0 in(1)
- 10.0 in(1)
- 12.0 in(1)
- 14.0 in(1)
- 16.0 in(1)
- 18.0 in(1)
- 19.05 in(1)
- 20.0 in(1)
- 25.0 in(1)
- 25.4 in(2)
- 31.75 in(2)
- 32.0 in(1)
- 38.1 in(2)
- 40.0 in(3)
- 50.0 in(2)
- 50.8 in(2)
- 63.0 in(3)
- 80.0 in(2)
a
Front End Size
Front End Size
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
- 12.0 mm(1)
- 14.0 mm(1)
- 16.0 mm(1)
- 18.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(1)
- 25.0 mm(1)
- 25.4 mm(2)
- 31.75 mm(2)
- 32.0 mm(1)
- 38.1 mm(2)
- 40.0 mm(3)
- 50.0 mm(2)
- 50.8 mm(2)
- 63.0 mm(3)
- 80.0 mm(2)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (13)
- B L (11)
- C A (23)
- C N (28)
- D P (13)
- H T (17)
- H W (44)
backEnd
Connection Type
Connection Type
- TAPER SHANK (33)
System Size
System Size
- KM80 (3)
- KM80ATC (75)
Back-End Diameter
Back-End Diameter
- 3.1496 in(41)
- 3.15 in(4)
a
No filters matching ""
