Cápsulas

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
    • M Stainless Steel (2)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
    • K Cast Iron (2)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
    • N Non-Ferrous Materials (2)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
      • N7
        MMC's (2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(2)
      • N1
        Wrought Aluminum (2)
      • N6
        Carbon, Graphite Composites, CFRP (2)
    • S High-Temp Alloys (2)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
    Applications
    Applications
    • Face GroovingFace Grooving (2)
    • GroovingGrooving (2)
    • ThreadingThreading (2)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (2)
    • K-All (2)
    • M-All (2)
    • N-All (2)
    • P-All (2)
    • S-All (2)
    Type of Thread
    Type of Thread
    • 60 (2)
    • BUTTRESS (2)
    • M (1)
    • UN (2)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2)
    • Lightly Interrupted Cut (2)
    • Smooth Cut (2)
    • Varying Depth of Cut (2)
    Over All Length [L]
    Over All Length [L]
    • 2.1654 in(1)
    • 2.1917 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 55.0 mm(1)
    • 55.67 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.003 in(2)
    • 0.004 in(2)
    • 0.007 in(1)
    • 0.008 in(2)
    • 0.01 in(1)
    • 0.02 in(2)
    • 0.03 in(2)
    • 0.031 in(2)
    • 0.039 in(2)
    • 0.047 in(2)
    • 0.049 in(2)
    • 0.059 in(2)
    • 0.063 in(2)
    • 0.069 in(2)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.075 mm(2)
    • 0.1 mm(2)
    • 0.175 mm(1)
    • 0.2 mm(2)
    • 0.25 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(2)
    • 0.775 mm(2)
    • 1.0 mm(2)
    • 1.2 mm(2)
    • 1.25 mm(2)
    • 1.5 mm(2)
    • 1.6 mm(2)
    • 1.75 mm(2)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K2885 (2)
    • K313 (2)
    • K420 (2)
    • K4H (1)
    • K68 (2)
    • KC250 (2)
    • KC5010 (2)
    • KC5025 (2)
    • KC5410 (2)
    • KC710 (2)
    • KC720 (2)
    • KC722 (2)
    • KC730 (2)
    • KC810 (2)
    • KC850 (2)
    • KC910 (1)
    • KC9110 (2)
    • KC9320 (2)
    • KC935 (2)
    • KC950 (2)
    • KCK20 (1)
    • KCK20B (2)
    • KCP10B (2)
    • KCP25B (2)
    • KCU10 (2)
    • KCU25 (2)
    • KT175 (2)
    • KT315 (2)
    • KU10T (2)
    • KU25T (2)
    • KU30T (2)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.0197 in(2)
    • 0.031 in(2)
    • 0.0315 in(2)
    • 0.035 in(2)
    • 0.039 in(2)
    • 0.0394 in(2)
    • 0.041 in(2)
    • 0.047 in(2)
    • 0.0472 in(2)
    • 0.055 in(2)
    • 0.0551 in(2)
    • 0.058 in(2)
    • 0.0591 in(2)
    • 0.062 in(2)
    • 0.0669 in(2)
    • 0.067 in(2)
    • 0.0689 in(2)
    • 0.076 in(2)
    • 0.0768 in(2)
    • 0.077 in(2)
    • 0.0787 in(2)
    • 0.079 in(2)
    • 0.0866 in(2)
    • 0.088 in(2)
    • 0.0886 in(2)
    • 0.094 in(2)
    • 0.0984 in(2)
    • 0.108 in(2)
    • 0.1083 in(2)
    • 0.118 in(2)
    • 0.1181 in(2)
    • 0.125 in(2)
    • 0.126 in(2)
    • 0.1278 in(2)
    • 0.128 in(2)
    • 0.129 in(2)
    • 0.1378 in(2)
    • 0.147 in(1)
    • 0.15 in(2)
    • 0.151 in(2)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(2)
    • 0.787 mm(2)
    • 0.8 mm(2)
    • 0.889 mm(2)
    • 0.991 mm(2)
    • 1.0 mm(2)
    • 1.041 mm(2)
    • 1.19 mm(2)
    • 1.194 mm(2)
    • 1.199 mm(1)
    • 1.2 mm(2)
    • 1.39 mm(2)
    • 1.397 mm(2)
    • 1.4 mm(2)
    • 1.473 mm(2)
    • 1.5 mm(2)
    • 1.56 mm(1)
    • 1.57 mm(1)
    • 1.575 mm(2)
    • 1.69 mm(2)
    • 1.7 mm(2)
    • 1.702 mm(2)
    • 1.75 mm(2)
    • 1.94 mm(2)
    • 1.95 mm(2)
    • 1.956 mm(2)
    • 2.0 mm(2)
    • 2.007 mm(2)
    • 2.2 mm(2)
    • 2.235 mm(2)
    • 2.24 mm(2)
    • 2.25 mm(2)
    • 2.388 mm(2)
    • 2.5 mm(2)
    • 2.74 mm(2)
    • 2.743 mm(2)
    • 2.75 mm(2)
    • 2.997 mm(2)
    • 3.0 mm(2)
    • 3.175 mm(2)
    • 3.18 mm(1)
    • 3.2 mm(2)
    • 3.245 mm(2)
    • 3.251 mm(2)
    • 3.27 mm(2)
    • 3.5 mm(2)
    • 3.73 mm(1)
    • 3.81 mm(2)
    • 3.84 mm(2)
    Cutting Width MinaCutting Width Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • H T (2)
    • H W (2)
    No filters matching ""
    Cartridges
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)