Read More

O design em V duplo da pastilha e do encaixe da pastilha segura a pastilha no lugar e minimiza o desvio radial.

Como resultado, essas condições de corte estável levam a uma alta precisão de largura de canal e alta repetibilidade.

Um mecanismo exclusivo de autofixação garante troca fácil de pastilha. 

De usinagem leve a pesada, a geometria positiva de quebra-cavacos SGP garante ação de corte suave e a evacuação de cavacos eficiente.

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (126)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(126)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(126)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(126)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(126)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(126)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(126)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(126)
    • M Stainless Steel (126)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(126)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(126)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(126)
    • K Cast Iron (110)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(110)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(110)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(110)
    • N Non-Ferrous Materials (92)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(92)
      • N1
        Wrought Aluminum (92)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(92)
    • S High-Temp Alloys (126)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(108)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(108)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(126)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(108)
    • H Hardened Materials (74)
      • H1
        Hardened Materials 44-48 HRC(74)
    Applications
    Applications
    • Slot MillingSlot Milling (74)
    • Slot SideSlot Side (74)
    • Slot Square EndSlot Square End (74)
    Cutting Diameter
    Cutting Diameter
    • 2.48 in(1)
    • 2.5 in(1)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.937 in(10)
    • 4.0 in(10)
    • 4.921 in(11)
    • 5.0 in(11)
    • 6.0 in(5)
    • 6.299 in(5)
    • 7.874 in(5)
    • 8.0 in(5)
    • 9.843 in(3)
    • 10.0 in(3)
    Cutting Diameter MinaCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 63.0 mm(1)
    • 63.5 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(10)
    • 101.6 mm(10)
    • 125.0 mm(11)
    • 127.0 mm(11)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(5)
    • 203.2 mm(5)
    • 250.0 mm(3)
    • 254.0 mm(3)
    Cutting Diameter MinaCutting Diameter Max
    Reach
    Reach
    • 1.781 in(1)
    • 1.791 in(1)
    • 1.821 in(1)
    • 2.0 in(1)
    • 2.01 in(1)
    • 2.039 in(1)
    • 2.053 in(1)
    • 2.067 in(1)
    • 2.1 in(1)
    • 2.415 in(1)
    • 2.429 in(1)
    • 2.445 in(1)
    • 2.463 in(1)
    • 83.0 in(1)
    Reach MinaReach Max
    Reach
    Reach
    • 45.25 mm(1)
    • 45.5 mm(1)
    • 46.25 mm(1)
    • 50.8 mm(1)
    • 51.05 mm(1)
    • 51.8 mm(1)
    • 52.15 mm(1)
    • 52.5 mm(1)
    • 52.9 mm(1)
    • 53.35 mm(1)
    • 61.35 mm(1)
    • 61.7 mm(1)
    • 62.1 mm(1)
    • 62.55 mm(1)
    Reach MinaReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (74)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (14)
    Number of Flutes
    Number of Flutes
    • 10 (3)
    • 11 (8)
    • 12 (3)
    • 13 (5)
    • 14 (2)
    • 15 (4)
    • 17 (6)
    • 4 (1)
    • 5 (7)
    • 6 (6)
    • 7 (14)
    • 8 (11)
    • 9 (4)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (95)
    • 2.0 (83)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.781 in(1)
    • 1.791 in(1)
    • 1.821 in(1)
    • 2.0 in(1)
    • 2.01 in(1)
    • 2.039 in(1)
    • 2.053 in(1)
    • 2.067 in(1)
    • 2.1 in(1)
    • 2.415 in(1)
    • 2.429 in(1)
    • 2.445 in(1)
    • 2.463 in(1)
    • 83.0 in(1)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 45.25 mm(1)
    • 45.5 mm(1)
    • 46.25 mm(1)
    • 50.8 mm(1)
    • 51.05 mm(1)
    • 51.8 mm(1)
    • 52.15 mm(1)
    • 52.5 mm(1)
    • 52.9 mm(1)
    • 53.35 mm(1)
    • 61.35 mm(1)
    • 61.7 mm(1)
    • 62.1 mm(1)
    • 62.55 mm(1)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.006 in(27)
    • 0.008 in(61)
    • 0.012 in(27)
    • 0.016 in(24)
    • 0.059 in(12)
    • 0.063 in(13)
    • 0.079 in(14)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.15 mm(27)
    • 0.2 mm(61)
    • 0.3 mm(27)
    • 0.4 mm(24)
    • 1.5 mm(12)
    • 1.6 mm(13)
    • 2.0 mm(14)
    Corner Radius MinaCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC522M (74)
    • KCPK30 (92)
    • KCPM40 (90)
    • KCU25 (92)
    Hand Of Tool
    Hand Of Tool
    • N (60)
    • R (14)
    Wiper Insert
    Wiper Insert
    • N (52)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.063 in(13)
    • 0.079 in(8)
    • 0.087 in(14)
    • 0.094 in(8)
    • 0.099 in(13)
    • 0.118 in(12)
    • 0.119 in(16)
    • 0.125 in(19)
    • 0.157 in(14)
    • 0.158 in(18)
    • 0.188 in(12)
    • 0.197 in(15)
    • 0.236 in(18)
    • 0.25 in(18)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 1.59 mm(13)
    • 2.01 mm(8)
    • 2.21 mm(14)
    • 2.39 mm(8)
    • 2.5 mm(13)
    • 3.01 mm(18)
    • 3.18 mm(19)
    • 4.0 mm(14)
    • 4.01 mm(18)
    • 4.78 mm(12)
    • 5.01 mm(15)
    • 6.01 mm(18)
    • 6.36 mm(18)
    Cutting Width MinaCutting Width Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.375 in(10)
    • 0.875 in(2)
    • 0.906 in(1)
    • 0.972 in(3)
    • 1.012 in(3)
    • 1.051 in(1)
    • 1.094 in(4)
    • 1.13 in(1)
    • 1.156 in(6)
    • 1.268 in(5)
    • 1.504 in(6)
    • 1.531 in(6)
    • 1.878 in(5)
    • 2.008 in(5)
    • 2.566 in(5)
    • 2.795 in(5)
    • 3.566 in(2)
    • 3.594 in(1)
    • 3.78 in(3)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 9.54 mm(10)
    • 22.22 mm(2)
    • 23.01 mm(1)
    • 24.7 mm(3)
    • 25.7 mm(3)
    • 26.7 mm(1)
    • 27.77 mm(2)
    • 27.78 mm(2)
    • 28.7 mm(1)
    • 29.36 mm(6)
    • 32.2 mm(5)
    • 38.2 mm(6)
    • 38.89 mm(6)
    • 47.71 mm(4)
    • 48.71 mm(1)
    • 51.0 mm(5)
    • 65.17 mm(2)
    • 65.18 mm(2)
    • 69.85 mm(1)
    • 71.0 mm(5)
    • 90.58 mm(1)
    • 91.27 mm(1)
    • 91.57 mm(1)
    • 96.0 mm(3)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 7.61 mm(13)
    • 9.18 mm(11)
    • 11.55 mm(13)
    • 12.68 mm(15)
    • 12.74 mm(15)
    • 14.51 mm(15)
    • 14.52 mm(12)
    • 14.74 mm(13)
    Maximum Cutting Insert Depth MinaMaximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.3 in(13)
    • 0.361 in(11)
    • 0.455 in(13)
    • 0.499 in(15)
    • 0.502 in(15)
    • 0.571 in(15)
    • 0.572 in(12)
    • 0.58 in(13)
    Maximum Cutting Insert Depth MinaMaximum Cutting Insert Depth Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • PRISMATIC (52)
    Insert Seat Size
    Insert Seat Size
    • 12 (3)
    • 16 (6)
    • 21 (11)
    • 27 (9)
    • 34 (8)
    • 42 (3)
    • 51 (12)
    Cutting Tool Material
    Cutting Tool Material
    • H W (52)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (60)
    • SHELL MILL (14)
    Back-End Diameter
    Back-End Diameter
    • 15.88 mm(1)
    • 15.9 mm(1)
    • 16.0 mm(2)
    • 22.0 mm(9)
    • 25.4 mm(10)
    • 25.41 mm(1)
    • 27.0 mm(2)
    • 31.76 mm(1)
    • 31.8 mm(10)
    • 32.0 mm(11)
    • 38.1 mm(5)
    • 40.0 mm(13)
    • 50.8 mm(8)
    Back-End Diameter MinaBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.63 in(3)
    • 0.87 in(9)
    • 1.0 in(11)
    • 1.06 in(1)
    • 1.063 in(1)
    • 1.25 in(11)
    • 1.26 in(12)
    • 1.5 in(5)
    • 1.58 in(12)
    • 2.0 in(8)
    Back-End Diameter MinaBack-End Diameter Max
    No filters matching ""
    Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
    Select the destination where you want to move a.
    Novo Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Código de catálogo ISO

    Número do catálogo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Você deve ser registrado para ver as informações do seu painel
    Session expired due to inactivity, please login again
    Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
    itens adicionados com sucesso ao carrinho
    Ver o carrinho

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Código de catálogo ISO Classe  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)