Beyond Evolution Integral Holders
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (148)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(148)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(148)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(148)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(148)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(148)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(148)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(148)
- Stainless Steel (148)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(148)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(148)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(148)
- Cast Iron (148)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(148)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(148)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(148)
- Non-Ferrous Materials (148)
- Wrought Aluminum (148)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(148)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (148)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (148)
- Carbon, Graphite Composites, CFRP (148)
- High-Temp Alloys (148)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(148)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(148)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(148)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(148)
- Hardened Materials (148)
- Hardened Materials 44-48 HRC(148)
- Hardened Materials 48-55 HRC(148)
Select First Choice
- (8)
- (48)
- (48)
- (28)
- (13)
- (81)
Applications
(148)
(148)
(40)
(40)
(40)
Cutting Condition Material
- (148)
- (148)
- (148)
- (148)
- (148)
- (148)
Cutting Condition
- (148)
- (148)
- (148)
Over All Length [L]
to
Over All Length [L]
to
Corner Radius
- (72)
- (52)
- (108)
- (92)
- (32)
- (32)
- (16)
- (56)
- (16)
- (16)
- (16)
- (16)
- (24)
- (24)
- (24)
- (24)
- (24)
- (24)
- (28)
- (28)
- (28)
- (28)
- (16)
- (16)
- (16)
- (16)
to
Corner Radius
- (72)
- (52)
- (108)
- (92)
- (32)
- (32)
- (16)
- (56)
- (16)
- (16)
- (16)
- (16)
- (24)
- (24)
- (24)
- (24)
- (24)
- (24)
- (28)
- (28)
- (28)
- (28)
- (16)
- (16)
- (16)
- (16)
to
Application
Grade Of Cutting Tool
- (148)
- (148)
- (96)
- (148)
- (148)
- (148)
- (148)
Hand Of Tool
- (74)
- (74)
Rake Angle Style
- (40)
Front-End
Cutting Width
- 2.0 (32)
- 2.12 (32)
- 2.125 (32)
- 2.387 (32)
- 2.388 (32)
- 2.51 (32)
- 2.511 (32)
- 3.0 (16)
- 3.125 (16)
- 3.175 (16)
- 3.177 (16)
- 3.3 (16)
- 3.301 (16)
- 3.302 (16)
- 4.0 (24)
- 4.094 (16)
- 4.125 (24)
- 4.75 (24)
- 4.76 (24)
- 4.762 (24)
- 4.763 (24)
- 4.873 (24)
- 4.877 (24)
- 4.878 (24)
- 5.0 (24)
- 5.125 (24)
- 6.0 (28)
- 6.125 (28)
- 6.346 (28)
- 6.35 (28)
- 6.473 (28)
- 6.477 (28)
- 6.478 (28)
- 7.0 (28)
- 7.125 (28)
- 7.317 (28)
- 7.92 (16)
- 7.925 (16)
- 8.0 (16)
- 8.051 (16)
- 8.052 (16)
- 8.125 (16)
- 9.525 (8)
- 9.651 (8)
- 10.0 (8)
- 10.125 (8)
to
Cutting Width
- 0.0787 (32)
- 0.0788 (32)
- 0.079 (32)
- 0.083 (32)
- 0.084 (32)
- 0.094 (32)
- 0.099 (32)
- 0.118 (16)
- 0.1181 (16)
- 0.123 (16)
- 0.125 (16)
- 0.13 (16)
- 0.157 (24)
- 0.1574 (24)
- 0.1575 (24)
- 0.158 (24)
- 0.161 (16)
- 0.162 (24)
- 0.187 (24)
- 0.1875 (24)
- 0.192 (24)
- 0.1968 (24)
- 0.197 (24)
- 0.202 (24)
- 0.236 (28)
- 0.2362 (28)
- 0.241 (28)
- 0.25 (28)
- 0.255 (28)
- 0.276 (28)
- 0.281 (28)
- 0.2881 (28)
- 0.312 (16)
- 0.315 (16)
- 0.317 (16)
- 0.3199 (16)
- 0.32 (16)
- 0.375 (8)
- 0.38 (8)
- 0.394 (8)
- 0.399 (8)
to
Insert Size
- (8)
- (32)
- (16)
- (24)
- (24)
- (28)
- (16)
Maximum Cutting Depth
to
Back-End
