Carbide Boring Bars
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (184)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(184)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(184)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(184)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(184)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(184)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(184)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(184)
- Stainless Steel (184)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(184)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(184)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(184)
- Cast Iron (179)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(179)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(179)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(179)
- Non-Ferrous Materials (150)
- Wrought Aluminum (150)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(150)
- High-Silicon Aluminum Alloys Si >12.2%(140)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (150)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (150)
- Carbon, Graphite Composites, CFRP (148)
- MMC's (150)
- High-Temp Alloys (184)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(184)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(184)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(184)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(184)
- Hardened Materials (110)
- Hardened Materials 44-48 HRC(110)
- Hardened Materials 48-55 HRC(110)
- Hardened Materials 56-60 HRC(110)
- Hardened Materials >60 HRC(107)
Select First Choice
- (7)
Applications
(16)
(1)
(181)
(166)
(173)
(16)
Cutting Condition Material
- (64)
- (171)
- (175)
- (94)
- (171)
- (171)
- (55)
Cutting Condition
- (117)
- (175)
- (178)
Tool Cutting Edge Angle
to
Connection Style
- (169)
- (15)
Over All Length [L]
- 60.32 (2)
- 63.5 (2)
- 69.85 (1)
- 76.2 (1)
- 80.0 (2)
- 85.72 (2)
- 90.0 (4)
- 100.0 (1)
- 100.33 (4)
- 100.58 (3)
- 101.6 (14)
- 110.0 (5)
- 111.12 (1)
- 123.19 (2)
- 123.25 (2)
- 124.25 (1)
- 124.75 (1)
- 127.0 (6)
- 140.0 (4)
- 149.25 (1)
- 150.0 (1)
- 151.25 (4)
- 152.4 (43)
- 177.8 (2)
- 178.75 (1)
- 179.25 (2)
- 180.0 (2)
- 181.25 (2)
- 200.0 (2)
- 201.45 (2)
- 202.555 (2)
- 203.2 (13)
- 251.45 (5)
- 253.995 (2)
- 254.0 (31)
- 304.8 (11)
to
Over All Length [L]
- 2.375 (2)
- 2.5 (2)
- 2.75 (1)
- 3.0 (1)
- 3.1496 (2)
- 3.375 (2)
- 3.5433 (4)
- 3.937 (1)
- 3.95 (4)
- 3.96 (3)
- 4.0 (14)
- 4.3307 (5)
- 4.375 (1)
- 4.85 (2)
- 4.8524 (2)
- 4.8917 (1)
- 4.9114 (1)
- 5.0 (6)
- 5.5118 (4)
- 5.876 (1)
- 5.906 (1)
- 5.9547 (4)
- 6.0 (43)
- 7.0 (2)
- 7.0374 (1)
- 7.0571 (2)
- 7.0866 (2)
- 7.1358 (2)
- 7.874 (2)
- 7.9311 (2)
- 7.9746 (2)
- 8.0 (13)
- 9.8996 (5)
- 10.0 (33)
- 12.0 (11)
to
Corner Radius
- (4)
- (63)
- (87)
- (54)
- (120)
- (54)
- (125)
- (12)
- (110)
- (40)
- (9)
to
Corner Radius
- (4)
- (63)
- (87)
- (54)
- (120)
- (54)
- (125)
- (122)
- (40)
- (9)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
- (7)
- (4)
- (4)
- (7)
- (3)
- (7)
- (7)
- (7)
- (4)
- (7)
- (7)
- (9)
- (9)
- (54)
- (4)
- (7)
- (4)
- (4)
- (4)
- (9)
- (4)
- (4)
- (9)
- (4)
- (7)
- (4)
- (4)
- (150)
- (46)
- (7)
- (7)
- (108)
- (4)
- (33)
- (71)
- (15)
- (54)
- (63)
- (69)
- (42)
- (74)
- (9)
- (36)
- (7)
- (50)
- (184)
- (172)
- (34)
- (99)
- (87)
- (103)
- (58)
- (179)
- (33)
- (103)
- (4)
- (106)
- (108)
- (125)
- (84)
- (119)
- (108)
- (86)
- (117)
- (87)
- (110)
- (9)
- (110)
- (102)
- (99)
- (38)
- (117)
- (84)
- (78)
- (167)
- (93)
- (103)
- (98)
- (105)
- (17)
- (81)
- (90)
- (105)
- (91)
- (97)
- (54)
- (113)
- (83)
- (37)
- (5)
- (94)
- (5)
- (107)
- (103)
- (113)
- (109)
- (9)
- (71)
- (5)
- (21)
- (38)
- (113)
- (87)
- (172)
- (155)
- (58)
- (67)
- (116)
- (34)
- (49)
- (133)
- (62)
- (140)
- (7)
- (4)
- (53)
- (53)
- (98)
- (4)
- (166)
- (9)
- (94)
- (68)
- (91)
- (78)
- (4)
- (4)
- (7)
- (4)
- (4)
- (4)
- (4)
- (7)
- (7)
- (7)
- (4)
- (4)
- (7)
- (7)
- (4)
- (7)
- (4)
- (4)
- (21)
- (4)
- (42)
- (20)
- (4)
- (8)
- (8)
- (8)
- (4)
- (4)
- (4)
- (11)
- (11)
- (13)
- (11)
- (11)
- (12)
- (15)
- (8)
- (13)
- (13)
- (11)
- (11)
- (15)
- (8)
- (8)
- (4)
Hand Of Tool
- (63)
- (121)
Wiper Insert
- (184)
- (68)
F Dimension
- 2.41 (4)
- 2.64 (5)
- 2.82 (3)
- 2.97 (4)
- 3.02 (6)
- 3.18 (1)
- 3.2 (2)
- 3.43 (2)
- 3.63 (1)
- 3.68 (7)
- 3.71 (2)
- 3.73 (5)
- 3.86 (2)
- 3.96 (5)
- 4.42 (2)
- 4.7 (5)
- 4.75 (3)
- 4.8 (2)
- 5.36 (1)
- 5.563 (6)
- 5.59 (1)
- 5.791 (1)
- 5.875 (4)
- 6.35 (10)
- 6.55 (1)
- 6.6 (1)
- 6.875 (5)
- 6.93 (1)
- 7.0 (2)
- 7.924 (1)
- 7.925 (10)
- 8.875 (5)
- 9.0 (6)
- 9.525 (2)
- 10.312 (11)
- 10.315 (2)
- 10.875 (4)
- 11.0 (7)
- 11.1 (2)
- 12.7 (17)
- 12.875 (5)
- 13.0 (4)
- 14.275 (3)
- 15.875 (2)
- 16.256 (7)
- 19.05 (2)
to
F Dimension
- 0.095 (4)
- 0.104 (5)
- 0.111 (3)
- 0.117 (4)
- 0.119 (6)
- 0.125 (1)
- 0.126 (2)
- 0.135 (2)
- 0.143 (1)
- 0.145 (7)
- 0.146 (2)
- 0.147 (5)
- 0.152 (2)
- 0.156 (5)
- 0.174 (2)
- 0.185 (5)
- 0.187 (3)
- 0.189 (2)
- 0.211 (1)
- 0.219 (6)
- 0.22 (1)
- 0.228 (1)
- 0.2313 (4)
- 0.25 (10)
- 0.258 (1)
- 0.26 (1)
- 0.2707 (5)
- 0.273 (1)
- 0.2756 (2)
- 0.312 (11)
- 0.3494 (5)
- 0.3543 (6)
- 0.375 (2)
- 0.406 (13)
- 0.4281 (3)
- 0.4331 (7)
- 0.437 (2)
- 0.4821 (1)
- 0.5 (17)
- 0.5069 (5)
- 0.5118 (4)
- 0.562 (3)
- 0.625 (2)
- 0.64 (7)
- 0.75 (2)
to
Minimum Bore Diameter
- 4.5700 (4)
- 5.2800 (5)
- 5.5400 (3)
- 5.6900 (4)
- 5.9400 (7)
- 6.6000 (1)
- 6.7800 (2)
- 6.9000 (1)
- 6.9800 (2)
- 7.0600 (1)
- 7.0800 (1)
- 7.0900 (3)
- 7.1000 (1)
- 7.2400 (8)
- 7.4200 (2)
- 7.5200 (3)
- 8.1500 (2)
- 8.8000 (1)
- 8.8100 (1)
- 9.0400 (3)
- 9.0500 (1)
- 9.0900 (4)
- 9.1400 (1)
- 9.2000 (1)
- 10.5000 (1)
- 10.5410 (6)
- 10.9500 (1)
- 11.0000 (4)
- 11.1250 (1)
- 12.1920 (10)
- 12.9000 (1)
- 13.0000 (7)
- 13.6700 (1)
- 15.2400 (13)
- 16.0000 (11)
- 18.5420 (2)
- 19.5500 (1)
- 19.5580 (11)
- 19.5600 (1)
- 20.0000 (11)
- 21.5900 (2)
- 23.6220 (13)
- 24.8920 (3)
- 25.0000 (9)
- 25.4000 (2)
- 30.2260 (2)
- 30.4800 (5)
- 30.9880 (2)
- 33.0200 (2)
to
Minimum Bore Diameter
- 0.1800 (4)
- 0.2080 (5)
- 0.2180 (3)
- 0.2240 (4)
- 0.2340 (7)
- 0.2600 (1)
- 0.2670 (2)
- 0.2720 (1)
- 0.2750 (2)
- 0.2780 (1)
- 0.2790 (4)
- 0.2800 (1)
- 0.2850 (8)
- 0.2920 (2)
- 0.2960 (3)
- 0.3210 (2)
- 0.3460 (1)
- 0.3470 (1)
- 0.3560 (4)
- 0.3580 (4)
- 0.3600 (1)
- 0.3620 (1)
- 0.4130 (1)
- 0.4150 (6)
- 0.4310 (1)
- 0.4331 (4)
- 0.4380 (1)
- 0.4800 (10)
- 0.5080 (1)
- 0.5118 (7)
- 0.5380 (1)
- 0.6000 (13)
- 0.6299 (11)
- 0.7300 (2)
- 0.7700 (13)
- 0.7874 (11)
- 0.8500 (2)
- 0.9300 (13)
- 0.9800 (3)
- 0.9843 (9)
- 1.0000 (2)
- 1.1900 (2)
- 1.2000 (5)
- 1.2200 (2)
- 1.3000 (2)
to
Minimum Axial Groove Diameter
- 4.57 (4)
- 5.28 (5)
- 5.54 (3)
- 5.69 (4)
- 5.94 (7)
- 6.6 (1)
- 6.78 (2)
- 6.9 (1)
- 6.98 (2)
- 7.06 (1)
- 7.08 (1)
- 7.09 (3)
- 7.1 (1)
- 7.24 (8)
- 7.42 (2)
- 7.52 (3)
- 8.15 (2)
- 8.8 (1)
- 8.81 (1)
- 9.04 (3)
- 9.05 (1)
- 9.09 (4)
- 9.14 (1)
- 9.2 (1)
- 10.5 (1)
- 10.541 (6)
- 10.95 (1)
- 11.0 (4)
- 11.125 (1)
- 12.192 (10)
- 12.9 (1)
- 13.0 (7)
- 13.67 (1)
- 15.24 (13)
- 16.0 (11)
- 18.542 (2)
- 19.55 (1)
- 19.558 (11)
- 19.56 (1)
- 20.0 (11)
- 21.59 (2)
- 23.622 (13)
- 24.892 (3)
- 25.0 (9)
- 25.4 (2)
- 30.226 (2)
- 30.48 (5)
- 30.988 (2)
- 33.02 (2)
to
Minimum Axial Groove Diameter
- 0.18 (4)
- 0.208 (5)
- 0.218 (3)
- 0.224 (4)
- 0.234 (7)
- 0.26 (1)
- 0.267 (2)
- 0.272 (1)
- 0.275 (2)
- 0.278 (1)
- 0.279 (4)
- 0.28 (1)
- 0.285 (8)
- 0.292 (2)
- 0.296 (3)
- 0.321 (2)
- 0.346 (1)
- 0.347 (1)
- 0.356 (4)
- 0.358 (4)
- 0.36 (1)
- 0.362 (1)
- 0.413 (1)
- 0.415 (6)
- 0.431 (1)
- 0.4331 (4)
- 0.438 (1)
- 0.48 (10)
- 0.508 (1)
- 0.5118 (7)
- 0.538 (1)
- 0.6 (13)
- 0.6299 (11)
- 0.73 (2)
- 0.77 (13)
- 0.7874 (11)
- 0.85 (2)
- 0.93 (13)
- 0.98 (3)
- 0.9843 (9)
- 1.0 (2)
- 1.19 (2)
- 1.2 (5)
- 1.22 (2)
- 1.3 (2)
to
Cutting Direction
- (110)
- (74)
Rake Angle Style
- (81)
- (26)
- (6)
- (71)
Maximum Bore Depth
to
Maximum Bore Depth
to
Boring Bar Material
- (169)
- (15)
Front-End
Clamp Style
- (7)
- (177)
Insert Shape
- (93)
- (20)
- (50)
- (21)
Maximum Cutting Depth
to
Insert Geometry
Cutting Tool Material
- (127)
- (152)
- (7)
- (7)
- (152)
- (173)
- (184)
Back-End
Connection Type
- (169)
- (15)
System Size
- (15)
Shank Height
to