Kenloc™ • M-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (684)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(684)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(684)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(684)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(684)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(684)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(684)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(684)
- Stainless Steel (684)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(684)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(684)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(684)
- Cast Iron (686)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(686)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(686)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(684)
- Non-Ferrous Materials (662)
- Wrought Aluminum (623)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(623)
- High-Silicon Aluminum Alloys Si >12.2%(275)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (662)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (623)
- Carbon, Graphite Composites, CFRP (553)
- MMC's (623)
- High-Temp Alloys (686)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(686)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(686)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(686)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(684)
- Hardened Materials (561)
- Hardened Materials 44-48 HRC(561)
- Hardened Materials 48-55 HRC(561)
- Hardened Materials 56-60 HRC(561)
- Hardened Materials >60 HRC(404)
Applications
(45)
(442)
(2)
(441)
(55)
(484)
(147)
(674)
Cutting Condition Material
- (561)
- (680)
- (152)
- (638)
- (519)
- (682)
- (621)
- (535)
- (192)
Cutting Condition
- (683)
- (520)
- (684)
- (686)
Connection Style
- (119)
- (437)
Over All Length [L]
to
Corner Radius
- (283)
- (283)
- (47)
- (510)
- (21)
- (638)
- (633)
- (81)
- (548)
- (117)
- (329)
- (43)
- (142)
- (36)
- (1)
- (20)
- (6)
- (2)
to
Corner Radius
- (283)
- (283)
- (47)
- (510)
- (21)
- (638)
- (633)
- (81)
- (548)
- (382)
- (43)
- (142)
- (36)
- (1)
- (20)
- (6)
- (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
- (482)
- (81)
- (314)
- (466)
- (364)
- (229)
- (460)
- (175)
- (197)
- (2)
- (209)
- (263)
- (128)
- (141)
- (128)
- (239)
- (608)
- (224)
- (544)
- (530)
- (425)
- (421)
- (599)
- (310)
- (482)
- (538)
- (623)
- (357)
- (517)
- (338)
- (618)
- (152)
- (181)
- (316)
- (295)
- (239)
- (213)
- (295)
- (192)
- (363)
- (193)
- (363)
- (286)
- (363)
- (286)
- (83)
- (2)
- (363)
- (371)
- (680)
- (608)
- (553)
- (598)
- (283)
- (101)
- (464)
- (81)
- (289)
- (563)
- (606)
- (419)
- (677)
- (633)
- (674)
- (595)
- (679)
- (626)
- (547)
- (684)
- (661)
- (682)
- (64)
- (676)
- (579)
- (47)
- (600)
- (615)
- (620)
- (614)
- (606)
- (643)
- (618)
- (627)
- (667)
- (639)
- (676)
- (53)
- (620)
- (547)
- (613)
- (621)
- (618)
- (619)
- (601)
- (565)
- (614)
- (601)
- (580)
- (416)
- (478)
- (394)
- (682)
- (663)
- (682)
- (666)
- (595)
- (676)
- (541)
- (554)
- (575)
- (531)
- (81)
- (513)
- (670)
- (608)
- (338)
- (340)
- (207)
- (353)
- (260)
- (192)
- (260)
- (263)
- (81)
- (81)
- (139)
- (385)
- (319)
- (400)
- (446)
- (188)
- (105)
- (53)
- (429)
- (643)
- (331)
- (526)
- (2)
- (282)
- (540)
- (340)
- (192)
- (560)
- (472)
- (564)
- (240)
- (228)
- (520)
- (535)
- (260)
- (436)
- (562)
- (239)
- (260)
- (128)
- (592)
- (452)
- (249)
- (53)
- (469)
- (180)
- (20)
- (20)
- (20)
- (20)
- (141)
- (446)
- (26)
- (476)
- (403)
- (58)
- (58)
- (56)
- (97)
- (14)
- (26)
- (86)
- (82)
- (58)
- (206)
- (176)
- (220)
- (176)
- (142)
- (236)
- (236)
- (220)
- (204)
- (142)
- (200)
- (158)
- (146)
- (190)
- (118)
- (105)
- (99)
- (200)
- (210)
- (210)
- (203)
- (79)
- (176)
- (200)
- (178)
- (168)
- (200)
- (56)
- (9)
- (61)
- (55)
- (14)
- (122)
- (77)
- (14)
- (155)
- (82)
- (131)
- (167)
- (120)
- (156)
- (82)
- (48)
- (100)
- (52)
- (105)
- (236)
- (115)
- (236)
- (230)
- (236)
- (230)
- (31)
- (246)
- (246)
- (246)
- (220)
- (230)
- (216)
- (135)
- (135)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
- (81)
Hand Of Tool
- (226)
- (79)
- (251)
Wiper Insert
- (686)
- (381)
F Dimension
- 0.0 (19)
- 6.35 (2)
- 7.938 (1)
- 7.94 (1)
- 8.0 (1)
- 9.52 (1)
- 9.525 (5)
- 10.0 (4)
- 12.0 (5)
- 12.25 (1)
- 12.5 (8)
- 12.7 (16)
- 13.76 (1)
- 13.764 (1)
- 15.799 (1)
- 15.87 (1)
- 15.875 (9)
- 15.88 (2)
- 16.0 (1)
- 16.82 (1)
- 17.0 (2)
- 19.05 (10)
- 19.075 (2)
- 19.685 (1)
- 19.688 (1)
- 20.0 (4)
- 20.5 (1)
- 21.031 (2)
- 22.0 (20)
- 22.22 (2)
- 22.225 (4)
- 22.352 (2)
- 23.165 (5)
- 24.0 (5)
- 25.0 (11)
- 25.197 (2)
- 25.4 (46)
- 25.5 (1)
- 26.416 (1)
- 27.0 (20)
- 27.381 (2)
- 28.016 (2)
- 28.7 (2)
- 30.0 (10)
- 31.75 (83)
- 31.775 (6)
- 32.0 (51)
- 33.55 (2)
- 34.366 (2)
- 35.0 (10)
- 35.006 (1)
- 38.0 (8)
- 38.1 (47)
- 38.125 (3)
- 38.379 (2)
- 40.0 (10)
- 40.5 (8)
- 43.0 (12)
- 44.958 (1)
- 46.25 (3)
- 48.0 (8)
- 50.0 (3)
- 50.8 (36)
- 50.826 (1)
- 53.0 (16)
- 57.15 (1)
- 57.658 (1)
- 63.5 (2)
to
F Dimension
- 0.0 (19)
- 0.25 (2)
- 0.312 (1)
- 0.3125 (1)
- 0.315 (1)
- 0.375 (6)
- 0.394 (4)
- 0.472 (3)
- 0.4724 (1)
- 0.473 (1)
- 0.4823 (1)
- 0.492 (7)
- 0.4921 (1)
- 0.5 (16)
- 0.542 (2)
- 0.622 (1)
- 0.625 (12)
- 0.63 (1)
- 0.662 (1)
- 0.669 (2)
- 0.75 (10)
- 0.751 (2)
- 0.775 (2)
- 0.787 (2)
- 0.7874 (2)
- 0.807 (1)
- 0.828 (2)
- 0.866 (10)
- 0.8661 (10)
- 0.875 (6)
- 0.88 (2)
- 0.912 (5)
- 0.9449 (5)
- 0.984 (9)
- 0.9843 (2)
- 0.992 (2)
- 1.0 (46)
- 1.0039 (1)
- 1.04 (1)
- 1.063 (20)
- 1.078 (2)
- 1.103 (2)
- 1.13 (2)
- 1.181 (2)
- 1.1811 (8)
- 1.25 (83)
- 1.251 (6)
- 1.2598 (16)
- 1.26 (33)
- 1.2698 (1)
- 1.321 (2)
- 1.353 (2)
- 1.378 (10)
- 1.3782 (1)
- 1.4961 (8)
- 1.5 (47)
- 1.501 (3)
- 1.511 (2)
- 1.5748 (4)
- 1.575 (6)
- 1.594 (1)
- 1.5945 (7)
- 1.6929 (12)
- 1.77 (1)
- 1.821 (3)
- 1.8898 (8)
- 1.9685 (1)
- 1.969 (1)
- 2.0 (37)
- 2.001 (1)
- 2.0866 (14)
- 2.087 (2)
- 2.25 (1)
- 2.27 (1)
- 2.5 (2)
- 126.0 (1)
to
Minimum Bore Diameter
to
Minimum Bore Diameter
to
Minimum Axial Groove Diameter
to
Cutting Direction
- (98)
- (73)
- (385)
Rake Angle Style
- (470)
- (86)
Maximum Bore Depth
to
Boring Bar Material
- (10)
Front-End
Insert Shape
- (190)
- (122)
- (29)
- (130)
- (112)
- (73)
- (31)
Insert Geometry
Cutting Tool Material
- (445)
- (408)
- (629)
- (598)
- (322)
- (461)
- (686)
Back-End
Connection Type
- (437)
- (119)
System Size
- (12)
- (6)
- (25)
- (23)
- (26)
- (27)
