A4™ • Double-Ended Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (639)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(639)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(639)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(639)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(639)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(639)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(639)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(639)
- Stainless Steel (566)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(566)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(566)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(566)
- Cast Iron (622)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(622)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(613)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(601)
- Non-Ferrous Materials (574)
- Wrought Aluminum (574)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(565)
- High-Silicon Aluminum Alloys Si >12.2%(110)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (574)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (565)
- Carbon, Graphite Composites, CFRP (565)
- MMC's (110)
- High-Temp Alloys (583)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(583)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(583)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(583)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(570)
- Hardened Materials (361)
- Hardened Materials 44-48 HRC(361)
- Hardened Materials 48-55 HRC(303)
- Hardened Materials 56-60 HRC(148)
- Hardened Materials >60 HRC(148)
Select First Choice
- (47)
- (241)
- (241)
- (150)
- (110)
- (125)
- (295)
Applications
(1)
(380)
(52)
(146)
(86)
(450)
(57)
(694)
(1)
(442)
(39)
(237)
(383)
(220)
(44)
(186)
Cutting Condition Material
- (257)
- (484)
- (409)
- (405)
- (362)
- (414)
Cutting Condition
- (377)
- (400)
- (589)
Tool Cutting Edge Angle
to
Connection Style
- (44)
- (3)
- (129)
Over All Length [L]
- 53.62 (5)
- 54.75 (7)
- 54.751 (1)
- 55.62 (2)
- 59.5 (1)
- 59.62 (5)
- 59.75 (1)
- 114.3 (10)
- 125.0 (39)
- 125.3 (5)
- 127.0 (18)
- 138.75 (2)
- 139.9 (5)
- 139.903 (1)
- 150.0 (21)
- 150.25 (2)
- 150.3 (4)
- 151.4 (4)
- 152.4 (34)
- 158.75 (2)
- 170.0 (11)
- 170.25 (2)
- 177.8 (3)
- 200.0 (12)
- 203.67 (6)
- 203.7 (4)
- 250.0 (6)
- 254.5 (3)
- 254.6 (1)
- 300.0 (6)
- 304.8 (1)
- 305.3 (3)
- 305.4 (2)
to
Over All Length [L]
- 2.111 (5)
- 2.155 (4)
- 2.156 (4)
- 2.19 (2)
- 2.342 (1)
- 2.347 (5)
- 2.352 (1)
- 4.5 (10)
- 4.9213 (36)
- 4.9234 (1)
- 4.9331 (5)
- 4.934 (2)
- 5.0 (18)
- 5.463 (2)
- 5.508 (6)
- 5.9055 (16)
- 5.906 (3)
- 5.915 (2)
- 5.9173 (4)
- 5.918 (2)
- 5.961 (4)
- 6.0 (34)
- 6.25 (2)
- 6.6929 (10)
- 6.693 (1)
- 6.703 (2)
- 7.0 (3)
- 7.874 (12)
- 8.0 (1)
- 8.01 (2)
- 8.018 (2)
- 8.019 (2)
- 8.02 (3)
- 9.8425 (6)
- 10.02 (3)
- 10.024 (1)
- 11.811 (6)
- 12.0 (1)
- 12.02 (3)
- 12.024 (2)
to
Corner Radius
- (6)
- (215)
- (289)
- (222)
- (35)
- (40)
- (39)
- (70)
- (13)
- (54)
- (52)
- (50)
- (42)
- (42)
- (40)
- (38)
- (35)
- (38)
- (36)
- (36)
- (12)
- (16)
- (18)
- (8)
- (9)
- (10)
- (12)
to
Corner Radius
- (6)
- (215)
- (289)
- (222)
- (35)
- (40)
- (39)
- (70)
- (13)
- (54)
- (52)
- (50)
- (42)
- (42)
- (40)
- (38)
- (35)
- (38)
- (36)
- (36)
- (12)
- (16)
- (18)
- (8)
- (9)
- (10)
- (12)
to
Corner Chamfer
to
Corner Chamfer
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
- (75)
- (199)
- (144)
- (135)
- (139)
- (248)
- (258)
- (190)
- (190)
- (160)
- (222)
- (224)
- (290)
- (335)
- (110)
- (71)
- (176)
- (189)
- (135)
- (166)
- (71)
- (29)
Hand Of Tool
- (100)
- (9)
- (119)
Wiper Insert
- (658)
Drilling Condition Material
- (67)
- (294)
- (219)
- (215)
- (172)
- (224)
F Dimension
- 7.95 (3)
- 12.1 (2)
- 12.17 (2)
- 12.22 (1)
- 12.74 (2)
- 12.79 (2)
- 12.81 (2)
- 12.85 (2)
- 12.91 (2)
- 13.0 (7)
- 15.92 (1)
- 15.97 (4)
- 16.02 (1)
- 16.1 (1)
- 16.2 (5)
- 16.22 (2)
- 16.871 (1)
- 16.873 (4)
- 17.0 (6)
- 19.03 (1)
- 19.08 (3)
- 19.101 (1)
- 19.134 (6)
- 19.234 (3)
- 20.1 (2)
- 20.11 (14)
- 20.2 (13)
- 20.21 (2)
- 20.3 (2)
- 21.77 (1)
- 21.8 (1)
- 22.0 (4)
- 25.11 (8)
- 25.2 (6)
- 25.21 (4)
- 25.3 (2)
- 25.335 (2)
- 25.4 (1)
- 25.43 (2)
- 25.484 (5)
- 25.485 (2)
- 25.499 (1)
- 25.584 (3)
- 25.71 (3)
- 25.77 (1)
- 25.875 (1)
- 26.0 (2)
- 27.9 (1)
- 29.87 (3)
- 30.0 (8)
- 30.4 (1)
- 30.8 (1)
- 33.1 (1)
- 34.875 (1)
- 35.1 (1)
- 35.4 (1)
- 38.9 (1)
- 39.1 (1)
to
F Dimension
- 0.313 (3)
- 0.4764 (2)
- 0.4791 (2)
- 0.4811 (1)
- 0.5016 (2)
- 0.5035 (2)
- 0.505 (2)
- 0.5059 (2)
- 0.507 (1)
- 0.508 (2)
- 0.5118 (6)
- 0.6268 (1)
- 0.6287 (4)
- 0.63 (1)
- 0.6307 (1)
- 0.637 (1)
- 0.6378 (4)
- 0.6386 (2)
- 0.664 (1)
- 0.6643 (2)
- 0.6693 (6)
- 0.7492 (1)
- 0.7512 (3)
- 0.752 (1)
- 0.7533 (6)
- 0.7572 (3)
- 0.7913 (2)
- 0.7917 (14)
- 0.7953 (13)
- 0.7957 (2)
- 0.7992 (2)
- 0.857 (1)
- 0.86 (1)
- 0.8661 (4)
- 0.9886 (8)
- 0.9921 (6)
- 0.9925 (4)
- 0.9943 (2)
- 0.9961 (2)
- 0.9974 (2)
- 1.0 (1)
- 1.0012 (2)
- 1.0033 (7)
- 1.0039 (1)
- 1.0072 (3)
- 1.0122 (3)
- 1.015 (1)
- 1.019 (1)
- 1.0236 (2)
- 1.0984 (1)
- 1.176 (4)
- 1.18 (1)
- 1.1811 (6)
- 1.1969 (1)
- 1.2126 (1)
- 1.3031 (1)
- 1.373 (1)
- 1.3819 (1)
- 1.3937 (1)
- 1.5315 (1)
- 1.5394 (1)
to
Minimum Bore Diameter
to
Maximum Axial Groove Diameter
to
Cutting Direction
- (175)
- (53)
Rake Angle Style
- (14)
- (57)
- (129)
Boring Bar Material
- (44)
Front-End
Adapter Front-End
- (3)
Clamp Style
- (181)
Cutting Width
- 1.5 (6)
- 1.99 (40)
- 2.0 (48)
- 2.05 (53)
- 2.12 (39)
- 2.38 (2)
- 2.388 (3)
- 2.464 (1)
- 2.49 (2)
- 2.5 (5)
- 2.62 (4)
- 3.0 (77)
- 3.05 (101)
- 3.175 (59)
- 3.18 (46)
- 3.251 (44)
- 4.0 (68)
- 4.05 (86)
- 4.76 (41)
- 4.761 (35)
- 4.762 (42)
- 4.826 (35)
- 5.0 (57)
- 5.05 (71)
- 6.0 (53)
- 6.05 (71)
- 6.35 (45)
- 6.426 (29)
- 7.937 (13)
- 7.938 (12)
- 7.94 (12)
- 8.0 (25)
- 8.026 (11)
- 8.05 (38)
- 9.52 (8)
- 9.525 (12)
- 9.53 (9)
- 9.627 (8)
- 10.0 (14)
- 10.05 (26)
to
Cutting Width
- 0.059 (6)
- 0.078 (40)
- 0.079 (48)
- 0.0807 (53)
- 0.084 (39)
- 0.094 (4)
- 0.097 (1)
- 0.098 (6)
- 0.103 (4)
- 0.118 (76)
- 0.119 (45)
- 0.12 (101)
- 0.125 (61)
- 0.128 (44)
- 0.157 (48)
- 0.1575 (36)
- 0.158 (54)
- 0.159 (86)
- 0.187 (47)
- 0.1875 (36)
- 0.19 (35)
- 0.197 (56)
- 0.198 (28)
- 0.199 (71)
- 0.236 (53)
- 0.2382 (71)
- 0.25 (45)
- 0.253 (29)
- 0.311 (12)
- 0.312 (14)
- 0.313 (12)
- 0.315 (23)
- 0.316 (12)
- 0.3169 (38)
- 0.375 (13)
- 0.379 (8)
- 0.394 (14)
- 0.3957 (26)
to
Front End Type
- (3)
Insert Shape
- (690)
Cartridge Size
- (11)
- (12)
Front End Style
- (3)
Insert Size
- (4)
- (25)
- (34)
- (33)
- (23)
- (25)
- (9)
Maximum Cutting Depth
- 0.1969 (3)
- 0.2756 (8)
- 0.289 (2)
- 0.291 (1)
- 0.293 (2)
- 0.315 (6)
- 0.3543 (1)
- 0.3937 (11)
- 0.409 (4)
- 0.41 (1)
- 0.4331 (3)
- 0.4724 (4)
- 0.484 (2)
- 0.5315 (9)
- 0.55 (1)
- 0.551 (6)
- 0.5512 (27)
- 0.5709 (4)
- 0.6299 (7)
- 0.642 (1)
- 0.646 (7)
- 0.65 (1)
- 0.6693 (29)
- 0.689 (6)
- 0.748 (6)
- 0.787 (5)
- 0.7874 (15)
- 0.866 (2)
- 0.8661 (4)
- 0.9449 (4)
- 1.023 (1)
- 1.0236 (12)
- 1.024 (4)
to
Gage Length
- (1)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (4)
- (3)
- (2)
- (4)
- (2)
- (2)
- (1)
- (2)
Gage Length
- (1)
- (2)
- (1)
- (2)
- (2)
- (6)
- (4)
- (3)
- (2)
- (4)
- (2)
- (2)
- (1)
- (2)
Maximum Cutting Insert Depth
- 1.64 (1)
- 1.65 (4)
- 1.76 (4)
- 1.9 (7)
- 2.0 (25)
- 2.48 (5)
- 2.5 (2)
- 2.58 (6)
- 2.73 (4)
- 2.9 (9)
- 3.0 (12)
- 3.3 (6)
- 3.4 (39)
- 3.41 (8)
- 3.45 (6)
- 3.5 (28)
- 3.51 (3)
- 3.52 (4)
- 3.6 (3)
- 3.8 (5)
- 4.07 (5)
- 4.1 (7)
- 4.15 (6)
- 4.2 (37)
- 4.4 (6)
- 4.5 (12)
- 4.6 (1)
- 4.74 (6)
- 4.8 (5)
- 4.9 (37)
- 5.0 (1)
- 5.3 (4)
- 5.9 (6)
- 6.0 (14)
- 6.1 (4)
- 6.24 (2)
- 6.28 (1)
- 6.35 (1)
- 6.4 (17)
- 6.5 (6)
- 7.3 (1)
- 7.94 (3)
- 8.1 (9)
- 8.2 (3)
to
Maximum Cutting Insert Depth
- 0.064 (1)
- 0.065 (4)
- 0.069 (4)
- 0.075 (7)
- 0.079 (25)
- 0.097 (1)
- 0.098 (6)
- 0.101 (6)
- 0.108 (4)
- 0.115 (9)
- 0.118 (12)
- 0.13 (6)
- 0.132 (2)
- 0.133 (1)
- 0.134 (44)
- 0.136 (6)
- 0.138 (35)
- 0.143 (3)
- 0.148 (1)
- 0.149 (4)
- 0.159 (1)
- 0.16 (5)
- 0.162 (3)
- 0.163 (9)
- 0.164 (1)
- 0.165 (36)
- 0.173 (1)
- 0.175 (5)
- 0.177 (12)
- 0.182 (1)
- 0.187 (6)
- 0.188 (1)
- 0.189 (4)
- 0.192 (7)
- 0.193 (24)
- 0.194 (6)
- 0.196 (1)
- 0.208 (4)
- 0.234 (6)
- 0.235 (2)
- 0.236 (12)
- 0.238 (2)
- 0.241 (2)
- 0.246 (2)
- 0.247 (1)
- 0.25 (1)
- 0.251 (3)
- 0.252 (13)
- 0.254 (1)
- 0.256 (6)
- 0.289 (1)
- 0.312 (3)
- 0.319 (9)
- 0.322 (3)
to
Minimum Groove Diameter
to
Insert Geometry
Shape
- (493)
Insert Seat Size
- (6)
- (29)
- (33)
- (12)
- (7)
- (96)
- (12)
- (90)
- (7)
- (66)
- (8)
- (82)
- (45)
Cutting Tool Material
- (144)
- (139)
- (170)
- (110)
- (176)
- (643)
Back-End
Connection Type
- (44)
- (3)
- (181)
System Size
- (3)
Back-End Diameter
to