TM721
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (16)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(16)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(16)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(16)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(16)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(16)
- M Stainless Steel (16)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(16)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(16)
- K Cast Iron (16)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(16)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(16)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(16)
- N Non-Ferrous Materials (16)
- N1Wrought Aluminum (16)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(16)
- N3High-Silicon Aluminum Alloys Si >12.2%(16)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (16)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (16)
- N6Carbon, Graphite Composites, CFRP (16)
- S High-Temp Alloys (16)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(16)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(16)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(16)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(16)
Applications
Applications
Countersinking (16)
Thread Milling (16)
Threading (16)
Cutting Diameter
Cutting Diameter
- 0.185 in(1)
- 0.189 in(1)
- 0.242 in(1)
- 0.256 in(1)
- 0.264 in(1)
- 0.301 in(1)
- 0.323 in(1)
- 0.354 in(1)
- 0.39 in(1)
- 0.409 in(1)
- 0.41 in(1)
- 0.457 in(1)
- 0.465 in(1)
- 0.477 in(1)
- 0.516 in(1)
- 0.535 in(1)
to
Cutting Diameter
Cutting Diameter
- 4.7 mm(1)
- 4.801 mm(1)
- 6.15 mm(1)
- 6.5 mm(1)
- 6.7 mm(1)
- 7.65 mm(1)
- 8.201 mm(1)
- 9.0 mm(1)
- 9.9 mm(1)
- 10.351 mm(1)
- 10.4 mm(1)
- 11.601 mm(1)
- 11.8 mm(1)
- 12.101 mm(1)
- 13.101 mm(1)
- 13.601 mm(1)
to
Type of Thread
Type of Thread
- M (6)
- MF (3)
- NC/UNC (7)
Thread Size
Thread Size
- 1/2-13 (1)
- 1/4-20 (1)
- 3/8-16 (1)
- 5/16-18 (1)
- 5/8-11 (1)
- 7/16-14 (1)
- 9/16-12 (1)
- M10X1.5 (1)
- M12X1.25 (1)
- M12X1.75 (1)
- M14X1.5 (1)
- M14X2 (1)
- M16X2 (1)
- M6X1 (1)
- M8X1 (1)
- M8X1.25 (1)
Reach
Reach
- 0.52 in(1)
- 0.678 in(1)
- 0.698 in(1)
- 0.836 in(1)
- 0.994 in(1)
- 1.042 in(1)
- 1.191 in(2)
- 1.348 in(1)
to
Reach
Reach
- 13.201 mm(1)
- 17.225 mm(1)
- 17.7 mm(1)
- 21.225 mm(1)
- 25.25 mm(1)
- 26.475 mm(1)
- 30.25 mm(2)
- 34.25 mm(1)
to
Number of Flutes
Number of Flutes
- 3 (8)
- 4 (8)
Over All Length [L]
Over All Length [L]
- 2.441 in(2)
- 2.914 in(3)
- 3.15 in(3)
- 3.543 in(3)
- 3.938 in(3)
- 4.016 in(2)
to
Over All Length [L]
Over All Length [L]
- 62.0 mm(2)
- 74.0 mm(3)
- 80.0 mm(3)
- 90.0 mm(3)
- 100.0 mm(3)
- 102.0 mm(2)
to
Front-End
Thread TPI
Thread TPI
- 11.0 (1)
- 12.0 (1)
- 13.0 (1)
- 14.0 (1)
- 16.0 (1)
- 18.0 (1)
- 20.0 (1)
to
Thread Pitch
Thread Pitch
- 1.0 mm(2)
- 1.25 mm(2)
- 1.5 mm(2)
- 1.75 mm(1)
- 2.0 mm(2)
to
Thread Pitch
Thread Pitch
- 0.039 in(2)
- 0.049 in(2)
- 0.06 in(2)
- 0.069 in(1)
- 0.079 in(2)
to
Back-End
Back-End Diameter
Back-End Diameter
- 8.0 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 14.0 mm(3)
- 16.0 mm(3)
- 18.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.315 in(2)
- 0.394 in(3)
- 0.473 in(3)
- 0.551 in(3)
- 0.63 in(3)
- 0.709 in(2)
to
No filters matching ""
