HexaCut™ 45° • Cast Iron
HexaCut 45° roughing and semi-finishing face milling operations are a terrific solution for use on cast and ductile iron materials as well CGI (Compacted Graphite Iron). Proven to be very effective in special automotive applications, the HexaCut milling platform can be a problem solver for difficult milling operations. Twelve cutting edges on each insert drastically reduce cost per edge and increase tool life. The comprehensive insert geometries match every application for light, medium, and heavy machining. Additionally, the 45° lead cutter bodies are engineered with fixed pockets for roughing applications up to Ap1 max = 6mm.
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (8)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(8)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(8)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(8)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(8)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(8)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(8)
- Stainless Steel (8)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(8)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(8)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(8)
- Cast Iron (41)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(40)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(40)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(41)
- High-Temp Alloys (8)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(8)
Applications
(7)
Cutting Diameter
to
Maximum Cutting Diameter
to
Cutting Length
to
Cutting Length
to
Tool Cutting Edge Angle
to
Connection Style
- (3)
- (3)
- (1)
Number of Flutes
- (1)
- (2)
- (2)
- (1)
- (1)
Over All Length [L]
to
Over All Length [L]
to
Corner Radius
- (10)
- (7)
- (9)
- (9)
- (19)
- (15)
- (14)
to
Corner Radius
- (10)
- (7)
- (9)
- (9)
- (19)
- (15)
- (14)
to
Application
Grade Of Cutting Tool
- (14)
- (8)
- (7)
- (7)
- (7)
- (7)
- (17)
- (18)
- (8)
- (8)
- (10)
Hand Of Tool
- (7)
Wiper Insert
- (34)
Front-End
Insert Geometry
Shape
- (34)
Insert IC Size
to
Insert IC Size
to
Cutting Edge Length
to
Cutting Edge Length
to
Chip Breaker CBMD
- (19)
- (5)
- (2)
- (1)
- (3)
Cutting Tool Material
- (1)
- (3)
- (30)
Tolerance Class
- (4)
- (3)
- (17)
- (10)
Back-End
Connection Type
- (7)
Back-End Diameter
to
