KCFM 45 最高可达2 微米的轴向跳动精度, 可满足最佳的表面质量要求。
超大正前角槽型的半精加工和修光刃刀片可降低切削力,减少振刀倾向,特别适合薄壁铸铁工件加工应用,可满足干式和湿式加工条件。

提供陶瓷和立方氮化硼材质。可采用更高的切削速度参数,因此可确保更高的生产率。从而降低单位工件加工成本。

  • 固定刀窝,用于安装半精加工刀片
  • 可调整刀夹,用于安装修光刃刀片,也可以更换不同刀夹,安装半精加工刀片
  • 刀窝编号系统可缩短刀具设置时间

刀体采用固定式和可调整刀窝设计,有两个选项:

  1. 在表面精度要求较低的情况下,将所有刀窝安装上半精加工刀片。在可调整刀窝产品中,提供半精加工刀片用的刀夹。
  2. 在对表面精度要求极高的情况下,使用可调修光刃刀夹并安装修光刃刀片。

半精加工和修光刃刀片的配置

半精加工刀片
HDHN43

修光刃刀片
SDHN43

干式 (D)/湿式 (W)
加工

 

D

 

 

 

D

 

 

 

D/W

 

 

Select Filters
Filters
    View filters in
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (25)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Face MillingFace Milling (18)
    • ID Thread TurningID Thread Turning (1)
    • Profile MillingProfile Milling (6)
    Cutting Diameter
    Cutting Diameter
    • 3.0 in(1)
    • 3.15 in(2)
    • 3.937 in(2)
    • 4.0 in(1)
    • 4.921 in(2)
    • 5.0 in(1)
    • 6.0 in(1)
    • 6.299 in(2)
    • 7.874 in(2)
    • 8.0 in(1)
    • 9.843 in(2)
    • 10.0 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 76.2 mm(1)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.6 mm(1)
    • 125.0 mm(2)
    • 127.0 mm(1)
    • 152.4 mm(1)
    • 160.0 mm(2)
    • 200.0 mm(2)
    • 203.2 mm(1)
    • 250.0 mm(2)
    • 254.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 85.73 mm(1)
    • 89.53 mm(2)
    • 109.53 mm(2)
    • 111.13 mm(1)
    • 134.53 mm(2)
    • 136.53 mm(1)
    • 161.93 mm(1)
    • 169.53 mm(1)
    • 169.54 mm(1)
    • 209.53 mm(2)
    • 212.73 mm(1)
    • 259.54 mm(2)
    • 263.53 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 3.375 in(1)
    • 3.525 in(2)
    • 4.312 in(2)
    • 4.375 in(1)
    • 5.297 in(2)
    • 5.375 in(1)
    • 6.375 in(1)
    • 6.675 in(2)
    • 8.249 in(2)
    • 8.375 in(1)
    • 10.218 in(2)
    • 10.375 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.09 mm(16)
    • 1.1 mm(2)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.043 in(18)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.967 in(2)
    • 1.968 in(4)
    • 2.479 in(4)
    • 2.48 in(8)
    Reach MintoReach Max
    Reach
    Reach
    • 49.97 mm(2)
    • 50.0 mm(4)
    • 62.97 mm(4)
    • 63.0 mm(8)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (18)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (10)
    • C-Bolt Circle (8)
    Number of Flutes
    Number of Flutes
    • 10 (3)
    • 12 (3)
    • 16 (3)
    • 24 (3)
    • 8 (6)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 4.0 (21)
    • 6.0 (22)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.967 in(2)
    • 1.968 in(4)
    • 2.479 in(4)
    • 2.48 in(8)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 49.97 mm(2)
    • 50.0 mm(4)
    • 62.97 mm(4)
    • 63.0 mm(8)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(21)
    • 0.031 in(22)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(21)
    • 0.8 mm(22)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(25)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(25)
    Corner Chamfer MintoCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KBK50 (20)
    • KC514M (20)
    • KCK20B (20)
    • KY3500 (19)
    • X00637 (18)
    Hand Of Tool
    Hand Of Tool
    • R (18)
    Wiper Insert
    Wiper Insert
    • N (4)
    • Y (3)
    frontEnd
    Insert Shape
    Insert Shape
    • H-HEXAGON 120 (22)
    • S-SQUARE 90 (21)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (4)
    • S-SQUARE 90 (3)
    Insert IC Size
    Insert IC Size
    • 12.7 mm(7)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(7)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 5.2 mm(3)
    • 5.201 mm(1)
    • 12.58 mm(1)
    • 12.7 mm(2)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.205 in(4)
    • 0.495 in(1)
    • 0.5 in(2)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • B H (2)
    • C N (1)
    • H W (4)
    Tolerance Class
    Tolerance Class
    • H (7)
    backEnd
    Connection Type
    Connection Type
    • SHELL MILL (18)
    Back-End Diameter
    Back-End Diameter
    • 25.4 mm(1)
    • 27.0 mm(2)
    • 31.8 mm(1)
    • 32.0 mm(2)
    • 38.1 mm(1)
    • 40.0 mm(4)
    • 50.8 mm(1)
    • 60.0 mm(4)
    • 63.5 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.0 in(1)
    • 1.064 in(2)
    • 1.25 in(1)
    • 1.26 in(2)
    • 1.5 in(1)
    • 1.575 in(4)
    • 2.0 in(1)
    • 2.363 in(4)
    • 2.5 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)