Beyond Evolution Modular Systems
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (42)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(42)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(42)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(42)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(42)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(42)
- Stainless Steel (42)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(42)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(42)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(42)
- Cast Iron (42)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(42)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(42)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(42)
- Non-Ferrous Materials (42)
- Wrought Aluminum (42)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
- Carbon, Graphite Composites, CFRP (42)
- High-Temp Alloys (42)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(42)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(42)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
- Hardened Materials (42)
- Hardened Materials 44-48 HRC(42)
- Hardened Materials 48-55 HRC(42)
Applications
(2)
(42)
(2)
(62)
(16)
(16)
Cutting Condition Material
- (42)
- (42)
- (42)
- (42)
- (42)
- (42)
Cutting Condition
- (42)
- (42)
- (42)
Tool Cutting Edge Angle
to
Application
Grade Of Cutting Tool
- (42)
- (42)
- (30)
- (42)
- (42)
- (42)
- (42)
Front-End
Adapter Front-End
- (76)
Clamp Style
- (18)
Cutting Width
- 1.6 (2)
- 2.0 (4)
- 2.12 (4)
- 2.125 (4)
- 2.387 (4)
- 2.388 (4)
- 2.51 (4)
- 2.511 (4)
- 3.0 (8)
- 3.125 (8)
- 3.175 (8)
- 3.177 (8)
- 3.3 (8)
- 3.301 (8)
- 3.302 (8)
- 4.0 (10)
- 4.094 (8)
- 4.125 (10)
- 4.75 (10)
- 4.76 (10)
- 4.762 (10)
- 4.763 (10)
- 4.873 (10)
- 4.877 (10)
- 4.878 (10)
- 5.0 (8)
- 5.125 (8)
- 6.0 (6)
- 6.125 (6)
- 6.346 (6)
- 6.35 (6)
- 6.473 (6)
- 6.477 (6)
- 6.478 (6)
- 7.0 (6)
- 7.125 (6)
- 7.317 (6)
- 7.92 (4)
- 7.925 (4)
- 8.0 (4)
- 8.051 (4)
- 8.052 (4)
- 8.125 (4)
to
Cutting Width
- 0.063 (2)
- 0.0787 (4)
- 0.0788 (4)
- 0.079 (4)
- 0.083 (4)
- 0.084 (4)
- 0.094 (4)
- 0.099 (4)
- 0.118 (8)
- 0.1181 (8)
- 0.123 (8)
- 0.125 (8)
- 0.13 (8)
- 0.157 (10)
- 0.1574 (10)
- 0.1575 (10)
- 0.158 (10)
- 0.161 (8)
- 0.162 (10)
- 0.187 (10)
- 0.1875 (10)
- 0.192 (10)
- 0.1968 (8)
- 0.197 (8)
- 0.202 (8)
- 0.236 (6)
- 0.2362 (6)
- 0.241 (6)
- 0.25 (6)
- 0.255 (6)
- 0.276 (6)
- 0.281 (6)
- 0.2881 (6)
- 0.312 (4)
- 0.315 (4)
- 0.317 (4)
- 0.3199 (4)
- 0.32 (4)
to
Front End Type
- (76)
Insert Shape
- (42)
Cartridge Size
- (32)
- (10)
Front End Style
- (76)
Gage Length
- (2)
- (2)
- (2)
- (2)
- (6)
- (6)
- (4)
- (4)
- (2)
- (6)
- (6)
- (6)
- (2)
- (12)
- (2)
- (4)
- (4)
- (4)
- (2)
- (2)
- (2)
- (6)
- (6)
- (4)
- (2)
- (4)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
Gage Length
- (2)
- (2)
- (2)
- (2)
- (6)
- (6)
- (4)
- (4)
- (2)
- (6)
- (6)
- (6)
- (2)
- (12)
- (2)
- (4)
- (4)
- (4)
- (2)
- (2)
- (2)
- (6)
- (6)
- (4)
- (2)
- (4)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
Insert Geometry
Cutting Tool Material
- (42)
Back-End
System Size
- (4)
- (4)
- (8)
- (8)
- (8)
- (8)
- (8)
- (4)
- (8)
- (8)
- (8)
to
