KTMS • T Slot Cutter
Designed to offer high metal-removal rates while minimizing the cost per cutting edge, Kennametal’s KTMS T-Slot cutters excel in producing precise "T" slots in machine beds with small radial depths of cut. These slot cutters are a versatile solution for T-slotting and side milling operations on cast iron and steel. The SDMT-EGG inserts engineered for KTMS cutters feature four honed cutting edges, providing exceptional durability and precision. To achieve optimal performance, it is recommended to maintain cutting feed rates between 0.10 to 0.15mm per revolution, as lower rates may lead to undesirable vibrations.
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (12)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(10)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(10)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(10)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- Stainless Steel (7)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7)
- Cast Iron (7)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
- Non-Ferrous Materials (5)
- Wrought Aluminum (5)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
- High-Silicon Aluminum Alloys Si >12.2%(5)
- Hardened Materials (7)
- Hardened Materials 44-48 HRC(7)
Applications
(5)
(5)
(5)
Cutting Diameter
to
Cutting Length
to
Tool Cutting Edge Angle
to
Connection Style
- (5)
Number of Flutes
- (1)
- (4)
Over All Length [L]
to
Corner Radius
- (4)
- (8)
to
Corner Radius
- (4)
- (8)
to
Application
Grade Of Cutting Tool
- (5)
- (7)
- (8)
- (7)
Hand Of Tool
- (5)
Wiper Insert
- (7)
Front-End
Cutting Width
to
Maximum Cutting Depth
to
Neck Diameter
to
Insert Geometry
Back-End
