Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

TMS

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
    • M Stainless Steel (27)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
    • K Cast Iron (27)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
    • S High-Temp Alloys (18)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(18)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(18)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(18)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(18)
    • H Hardened Materials (23)
      • H1
        Hardened Materials 44-48 HRC(23)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (7)
    • OD Thread TurningOD Thread Turning (10)
    • Thread MillingThread Milling (18)
    • ThreadingThreading (18)
    Cutting Diameter
    Cutting Diameter
    • 0.354 in(2)
    • 0.3543 in(2)
    • 0.3898 in(1)
    • 0.39 in(1)
    • 0.61 in(1)
    • 0.6102 in(2)
    • 0.67 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.9843 in(1)
    • 1.0236 in(1)
    • 1.024 in(1)
    • 1.18 in(1)
    • 1.6535 in(1)
    • 1.654 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.992 mm(2)
    • 9.0 mm(2)
    • 9.9 mm(1)
    • 10.135 mm(1)
    • 15.494 mm(1)
    • 15.5 mm(2)
    • 17.018 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 26.01 mm(1)
    • 29.972 mm(1)
    • 42.0 mm(1)
    • 42.012 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.4 mm(2)
    • 10.41 mm(2)
    • 10.92 mm(1)
    • 10.922 mm(1)
    • 11.0 mm(1)
    • 16.0 mm(5)
    • 16.002 mm(2)
    • 26.92 mm(1)
    • 26.924 mm(1)
    • 27.0 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.4094 in(2)
    • 0.41 in(2)
    • 0.43 in(2)
    • 0.433 in(1)
    • 0.63 in(7)
    • 1.06 in(2)
    • 1.063 in(2)
    Cutting Length MinkomuCutting Length Max
    Type of Thread
    Type of Thread
    • BSW (25)
    • M (21)
    • NPS (7)
    • NPT (10)
    • NPTF (10)
    • UN (14)
    Reach
    Reach
    • 0.472 in(1)
    • 0.4724 in(1)
    • 0.61 in(1)
    • 0.6102 in(1)
    • 0.669 in(1)
    • 0.6693 in(1)
    • 0.807 in(1)
    • 0.8661 in(1)
    • 0.87 in(1)
    • 0.9055 in(1)
    • 0.91 in(1)
    • 1.34 in(1)
    • 1.575 in(1)
    • 1.69 in(1)
    • 1.6929 in(1)
    • 1.77 in(1)
    • 1.7717 in(1)
    • 2.03 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 11.99 mm(1)
    • 12.0 mm(1)
    • 15.49 mm(1)
    • 15.5 mm(1)
    • 16.99 mm(1)
    • 17.0 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 23.0 mm(1)
    • 23.11 mm(1)
    • 34.04 mm(1)
    • 40.0 mm(1)
    • 42.93 mm(1)
    • 43.0 mm(1)
    • 44.96 mm(1)
    • 45.0 mm(1)
    • 51.56 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (9)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Weldon (18)
    Number of Flutes
    Number of Flutes
    • 1 (13)
    • 2 (5)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (10)
    • 2.0 (28)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.7165 in(1)
    • 2.72 in(1)
    • 3.0315 in(1)
    • 3.12 in(1)
    • 3.1496 in(1)
    • 3.3 in(1)
    • 3.3071 in(1)
    • 3.3465 in(1)
    • 3.38 in(1)
    • 3.42 in(1)
    • 3.56 in(1)
    • 3.583 in(1)
    • 3.858 in(1)
    • 3.937 in(1)
    • 4.02 in(1)
    • 4.38 in(1)
    • 4.65 in(1)
    • 4.7244 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 69.0 mm(1)
    • 69.088 mm(1)
    • 77.0 mm(1)
    • 79.248 mm(1)
    • 80.0 mm(1)
    • 83.82 mm(1)
    • 84.0 mm(1)
    • 85.0 mm(1)
    • 85.852 mm(1)
    • 86.868 mm(1)
    • 90.424 mm(1)
    • 91.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 102.108 mm(1)
    • 111.252 mm(1)
    • 118.11 mm(1)
    • 120.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (18)
    • KC620M (19)
    • KC635M (23)
    Hand Of Tool
    Hand Of Tool
    • R (18)
    Wiper Insert
    Wiper Insert
    • N (10)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (7)
    • 30.0 (3)
    Countersunk Angle MinkomuCountersunk Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.37 in(1)
    • 0.55 in(2)
    • 0.57 in(2)
    • 0.58 in(1)
    • 0.59 in(2)
    • 0.91 in(1)
    • 0.94 in(1)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 9.398 mm(1)
    • 13.97 mm(2)
    • 14.478 mm(2)
    • 14.732 mm(1)
    • 14.986 mm(2)
    • 23.114 mm(1)
    • 23.876 mm(1)
    Cutting Width MinkomuCutting Width Max
    Thread TPI
    Thread TPI
    • 11.0 (3)
    • 12.0 (1)
    • 14.0 (2)
    • 19.0 (1)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.5 mm(3)
    • 0.75 mm(11)
    • 1.0 mm(14)
    • 1.25 mm(14)
    • 1.5 mm(20)
    • 1.75 mm(7)
    • 2.0 mm(12)
    • 2.5 mm(4)
    • 3.0 mm(4)
    • 3.5 mm(4)
    • 4.0 mm(4)
    • 4.5 mm(4)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.5 in(3)
    • 0.75 in(11)
    • 1.0 in(14)
    • 1.25 in(14)
    • 1.5 in(20)
    • 1.75 in(7)
    • 2.0 in(12)
    • 2.5 in(4)
    • 3.0 in(4)
    • 3.5 in(4)
    • 4.0 in(4)
    • 4.5 in(4)
    Thread Pitch MinkomuThread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.2677 in(2)
    • 0.29 in(1)
    • 0.2913 in(1)
    • 0.4803 in(1)
    • 0.49 in(1)
    • 0.4921 in(1)
    • 0.59 in(1)
    • 0.5906 in(1)
    • 0.748 in(1)
    • 0.8858 in(1)
    • 0.94 in(1)
    • 1.4173 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 6.8 mm(2)
    • 7.366 mm(1)
    • 7.4 mm(1)
    • 12.2 mm(1)
    • 12.446 mm(1)
    • 12.5 mm(1)
    • 14.986 mm(1)
    • 15.0 mm(1)
    • 19.0 mm(1)
    • 22.5 mm(1)
    • 23.876 mm(1)
    • 36.0 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    insertGeometry
    Shape
    Shape
    • TM-TRIANGLE THREAD MILL 60 (10)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(1)
    • 9.525 mm(7)
    • 15.875 mm(2)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(1)
    • 0.375 in(7)
    • 0.625 in(2)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (10)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (18)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(1)
    • 12.7 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(4)
    • 20.0 mm(3)
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.4724 in(1)
    • 0.5 in(1)
    • 0.625 in(1)
    • 0.6299 in(2)
    • 0.75 in(4)
    • 0.7874 in(3)
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(1)
    • 1.2598 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    TMS
    Tapered Thread Mills
    (12)

    Tapered Thread Mills

    Inserts
    (10)

    Inserts

    Parallel Thread Mills
    (6)

    Parallel Thread Mills

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk