DUO-λOCK® Modulární čelní stopkové frézy • HARVI™ I TE

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (25)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
    • M Stainless Steel (25)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
    • K Cast Iron (25)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
    • S High-Temp Alloys (25)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
    • H Hardened Materials (25)
      • H1
        Hardened Materials 44-48 HRC(25)
      • H2
        Hardened Materials 48-55 HRC(25)
    Applications
    Applications
    • PocketPocket (25)
    • Pocket HelicalPocket Helical (25)
    • Pocket MillingPocket Milling (25)
    • Pocket Plunge MillingPocket Plunge Milling (6)
    • RampingRamping (2)
    • Shoulder MillingShoulder Milling (25)
    • Shoulder RoughingShoulder Roughing (25)
    • Shoulder Square EndShoulder Square End (6)
    • Slot MillingSlot Milling (6)
    • Slot Square EndSlot Square End (6)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.4724 in(3)
    • 0.5 in(3)
    • 0.625 in(2)
    • 0.6299 in(3)
    • 0.75 in(2)
    • 0.7874 in(2)
    • 0.9843 in(1)
    • 1.0 in(3)
    • 1.25 in(1)
    • 1.2598 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(3)
    • 12.7 mm(3)
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(1)
    • 25.4 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 14.288 mm(2)
    • 15.0 mm(2)
    • 18.0 mm(3)
    • 19.05 mm(3)
    • 23.813 mm(2)
    • 24.0 mm(3)
    • 28.575 mm(2)
    • 30.0 mm(2)
    • 37.5 mm(1)
    • 38.1 mm(3)
    • 47.625 mm(1)
    • 48.0 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.5625 in(2)
    • 0.5906 in(2)
    • 0.7087 in(3)
    • 0.75 in(3)
    • 0.9375 in(2)
    • 0.9449 in(3)
    • 1.125 in(2)
    • 1.1811 in(2)
    • 1.4764 in(1)
    • 1.5 in(3)
    • 1.875 in(1)
    • 1.8898 in(1)
    Cutting Length MinkomuCutting Length Max
    Over All Length [L]
    Over All Length [L]
    • 1.3346 in(2)
    • 1.378 in(2)
    • 1.6535 in(3)
    • 1.7165 in(3)
    • 2.1929 in(2)
    • 2.2047 in(3)
    • 2.6299 in(2)
    • 2.7126 in(2)
    • 3.4606 in(1)
    • 3.4882 in(3)
    • 4.3976 in(1)
    • 4.4173 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 33.9 mm(2)
    • 35.0 mm(2)
    • 42.0 mm(3)
    • 43.6 mm(3)
    • 55.7 mm(2)
    • 56.0 mm(3)
    • 66.8 mm(2)
    • 68.9 mm(2)
    • 87.9 mm(1)
    • 88.6 mm(3)
    • 111.7 mm(1)
    • 112.2 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • CHAMFER (6)
    • RADIUS (13)
    • SQUARE END (6)
    Corner Radius
    Corner Radius
    • 0.0 in(12)
    • 0.015 in(1)
    • 0.02 in(2)
    • 0.03 in(4)
    • 0.039 in(2)
    • 0.06 in(2)
    • 0.118 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(12)
    • 0.375 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(4)
    • 1.0 mm(2)
    • 1.525 mm(2)
    • 3.0 mm(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(19)
    • 0.5 mm(6)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(19)
    • 0.0197 in(6)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCPM15 (12)
    • KCSM15 (13)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.125 mm(2)
    • 9.6 mm(2)
    • 11.5 mm(3)
    • 12.2 mm(3)
    • 15.375 mm(2)
    • 15.5 mm(3)
    • 18.55 mm(2)
    • 19.3 mm(2)
    • 24.0 mm(1)
    • 24.4 mm(3)
    • 30.75 mm(1)
    • 31.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.3593 in(2)
    • 0.378 in(2)
    • 0.4528 in(3)
    • 0.4803 in(3)
    • 0.6053 in(2)
    • 0.6102 in(3)
    • 0.7303 in(2)
    • 0.7598 in(2)
    • 0.9449 in(1)
    • 0.9606 in(3)
    • 1.2106 in(1)
    • 1.2205 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)