KNS®
Read More
Konstrukce břitové destičky a lůžka s dvojitou V-drážkou bezpečně drží břitové destičky v dané pozici a minimalizuje radiální házivost.
Výsledkem je, že tyto stabilní řezné podmínky vedou k velké přesnosti drážky a vynikající opakovatelnosti.
Unikátní samosvorný mechanismus zajišťuje snadnou výměnu břitových destiček.
Pozitivní geometrie s SGP utvařečem třísky zajišťuje lehké řezy a snadný odchod třísek od lehkého až po těžké obrábění.
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (126)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(126)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(126)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(126)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(126)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(126)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(126)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(126)
- M Stainless Steel (126)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(126)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(126)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(126)
- K Cast Iron (110)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(110)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(110)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(110)
- N Non-Ferrous Materials (92)
- N3High-Silicon Aluminum Alloys Si >12.2%(92)
- N1Wrought Aluminum (92)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(92)
- S High-Temp Alloys (126)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(108)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(108)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(126)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(108)
- H Hardened Materials (74)
- H1Hardened Materials 44-48 HRC(74)
Applications
Applications
Slot Milling (74)
Slot Side (74)
Slot Square End (74)
Cutting Diameter
Cutting Diameter
- 2.48 in(1)
- 2.5 in(1)
- 3.0 in(2)
- 3.15 in(2)
- 3.937 in(10)
- 4.0 in(10)
- 4.921 in(11)
- 5.0 in(11)
- 6.0 in(5)
- 6.299 in(5)
- 7.874 in(5)
- 8.0 in(5)
- 9.843 in(3)
- 10.0 in(3)
komu
Cutting Diameter
Cutting Diameter
- 63.0 mm(1)
- 63.5 mm(1)
- 76.2 mm(2)
- 80.0 mm(2)
- 100.0 mm(10)
- 101.6 mm(10)
- 125.0 mm(11)
- 127.0 mm(11)
- 152.4 mm(5)
- 160.0 mm(5)
- 200.0 mm(5)
- 203.2 mm(5)
- 250.0 mm(3)
- 254.0 mm(3)
komu
Reach
Reach
- 1.781 in(1)
- 1.791 in(1)
- 1.821 in(1)
- 2.0 in(1)
- 2.01 in(1)
- 2.039 in(1)
- 2.053 in(1)
- 2.067 in(1)
- 2.1 in(1)
- 2.415 in(1)
- 2.429 in(1)
- 2.445 in(1)
- 2.463 in(1)
- 83.0 in(1)
komu
Reach
Reach
- 45.25 mm(1)
- 45.5 mm(1)
- 46.25 mm(1)
- 50.8 mm(1)
- 51.05 mm(1)
- 51.8 mm(1)
- 52.15 mm(1)
- 52.5 mm(1)
- 52.9 mm(1)
- 53.35 mm(1)
- 61.35 mm(1)
- 61.7 mm(1)
- 62.1 mm(1)
- 62.55 mm(1)
komu
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (74)
komu
Connection Style
Connection Style
- A-Socket Head Cap Screw (14)
Number of Flutes
Number of Flutes
- 10 (3)
- 11 (8)
- 12 (3)
- 13 (5)
- 14 (2)
- 15 (4)
- 17 (6)
- 4 (1)
- 5 (7)
- 6 (6)
- 7 (14)
- 8 (11)
- 9 (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (95)
- 2.0 (83)
komu
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.781 in(1)
- 1.791 in(1)
- 1.821 in(1)
- 2.0 in(1)
- 2.01 in(1)
- 2.039 in(1)
- 2.053 in(1)
- 2.067 in(1)
- 2.1 in(1)
- 2.415 in(1)
- 2.429 in(1)
- 2.445 in(1)
- 2.463 in(1)
- 83.0 in(1)
komu
Over All Length [L]
Over All Length [L]
- 45.25 mm(1)
- 45.5 mm(1)
- 46.25 mm(1)
- 50.8 mm(1)
- 51.05 mm(1)
- 51.8 mm(1)
- 52.15 mm(1)
- 52.5 mm(1)
- 52.9 mm(1)
- 53.35 mm(1)
- 61.35 mm(1)
- 61.7 mm(1)
- 62.1 mm(1)
- 62.55 mm(1)
komu
Corner Radius
Corner Radius
- 0.006 in(27)
- 0.008 in(61)
- 0.012 in(27)
- 0.016 in(24)
- 0.059 in(12)
- 0.063 in(13)
- 0.079 in(14)
komu
Corner Radius
Corner Radius
- 0.15 mm(27)
- 0.2 mm(61)
- 0.3 mm(27)
- 0.4 mm(24)
- 1.5 mm(12)
- 1.6 mm(13)
- 2.0 mm(14)
komu
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC522M (74)
- KCPK30 (92)
- KCPM40 (90)
- KCU25 (92)
Hand Of Tool
Hand Of Tool
- N (60)
- R (14)
Wiper Insert
Wiper Insert
- N (52)
frontEnd
Cutting Width
Cutting Width
- 0.063 in(13)
- 0.079 in(8)
- 0.087 in(14)
- 0.094 in(8)
- 0.099 in(13)
- 0.118 in(12)
- 0.119 in(16)
- 0.125 in(19)
- 0.157 in(14)
- 0.158 in(18)
- 0.188 in(12)
- 0.197 in(15)
- 0.236 in(18)
- 0.25 in(18)
komu
Cutting Width
Cutting Width
- 1.59 mm(13)
- 2.01 mm(8)
- 2.21 mm(14)
- 2.39 mm(8)
- 2.5 mm(13)
- 3.01 mm(18)
- 3.18 mm(19)
- 4.0 mm(14)
- 4.01 mm(18)
- 4.78 mm(12)
- 5.01 mm(15)
- 6.01 mm(18)
- 6.36 mm(18)
komu
Maximum Cutting Depth
Maximum Cutting Depth
- 0.375 in(10)
- 0.875 in(2)
- 0.906 in(1)
- 0.972 in(3)
- 1.012 in(3)
- 1.051 in(1)
- 1.094 in(4)
- 1.13 in(1)
- 1.156 in(6)
- 1.268 in(5)
- 1.504 in(6)
- 1.531 in(6)
- 1.878 in(5)
- 2.008 in(5)
- 2.566 in(5)
- 2.795 in(5)
- 3.566 in(2)
- 3.594 in(1)
- 3.78 in(3)
komu
Maximum Cutting Depth
Maximum Cutting Depth
- 9.54 mm(10)
- 22.22 mm(2)
- 23.01 mm(1)
- 24.7 mm(3)
- 25.7 mm(3)
- 26.7 mm(1)
- 27.77 mm(2)
- 27.78 mm(2)
- 28.7 mm(1)
- 29.36 mm(6)
- 32.2 mm(5)
- 38.2 mm(6)
- 38.89 mm(6)
- 47.71 mm(4)
- 48.71 mm(1)
- 51.0 mm(5)
- 65.17 mm(2)
- 65.18 mm(2)
- 69.85 mm(1)
- 71.0 mm(5)
- 90.58 mm(1)
- 91.27 mm(1)
- 91.57 mm(1)
- 96.0 mm(3)
komu
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 7.61 mm(13)
- 9.18 mm(11)
- 11.55 mm(13)
- 12.68 mm(15)
- 12.74 mm(15)
- 14.51 mm(15)
- 14.52 mm(12)
- 14.74 mm(13)
komu
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.3 in(13)
- 0.361 in(11)
- 0.455 in(13)
- 0.499 in(15)
- 0.502 in(15)
- 0.571 in(15)
- 0.572 in(12)
- 0.58 in(13)
komu
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- PRISMATIC (52)
Insert Seat Size
Insert Seat Size
- 12 (3)
- 16 (6)
- 21 (11)
- 27 (9)
- 34 (8)
- 42 (3)
- 51 (12)
Cutting Tool Material
Cutting Tool Material
- H W (52)
backEnd
Connection Type
Connection Type
- ARBOR (60)
- SHELL MILL (14)
Back-End Diameter
Back-End Diameter
- 15.88 mm(1)
- 15.9 mm(1)
- 16.0 mm(2)
- 22.0 mm(9)
- 25.4 mm(10)
- 25.41 mm(1)
- 27.0 mm(2)
- 31.76 mm(1)
- 31.8 mm(10)
- 32.0 mm(11)
- 38.1 mm(5)
- 40.0 mm(13)
- 50.8 mm(8)
komu
Back-End Diameter
Back-End Diameter
- 0.625 in(1)
- 0.63 in(3)
- 0.87 in(9)
- 1.0 in(11)
- 1.06 in(1)
- 1.063 in(1)
- 1.25 in(11)
- 1.26 in(12)
- 1.5 in(5)
- 1.58 in(12)
- 2.0 in(8)
komu
No filters matching ""
