Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KSRM™ • Daisy IC12

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (53)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(53)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(53)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
    • M Stainless Steel (53)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
    • K Cast Iron (38)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(38)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(38)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(38)
    • N Non-Ferrous Materials (30)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(30)
      • N1
        Wrought Aluminum (30)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(30)
    • S High-Temp Alloys (52)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(47)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(47)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(47)
    • H Hardened Materials (36)
      • H1
        Hardened Materials 44-48 HRC(36)
    Applications
    Applications
    • Face MillingFace Milling (29)
    • PocketPocket (29)
    • Pocket HelicalPocket Helical (29)
    • Pocket MillingPocket Milling (29)
    • Profile MillingProfile Milling (29)
    • RampingRamping (29)
    • Shoulder Ball NoseShoulder Ball Nose (29)
    • Shoulder MillingShoulder Milling (29)
    • Slot MillingSlot Milling (29)
    Cutting Diameter
    Cutting Diameter
    • 0.778 in(3)
    • 0.7874 in(3)
    • 0.906 in(1)
    • 1.028 in(3)
    • 1.1024 in(2)
    • 1.181 in(1)
    • 1.496 in(1)
    • 1.4961 in(1)
    • 1.528 in(1)
    • 1.5748 in(1)
    • 2.0079 in(2)
    • 2.028 in(1)
    • 2.126 in(1)
    • 2.528 in(2)
    • 2.6772 in(2)
    • 3.4646 in(1)
    • 3.465 in(1)
    • 3.528 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 19.75 mm(3)
    • 20.0 mm(3)
    • 23.0 mm(1)
    • 26.1 mm(3)
    • 28.0 mm(2)
    • 30.0 mm(1)
    • 38.0 mm(2)
    • 38.8 mm(1)
    • 40.0 mm(1)
    • 51.0 mm(2)
    • 51.5 mm(1)
    • 54.0 mm(1)
    • 64.2 mm(2)
    • 68.0 mm(2)
    • 88.0 mm(2)
    • 89.6 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 31.8 mm(3)
    • 32.0 mm(3)
    • 35.0 mm(1)
    • 38.1 mm(3)
    • 40.0 mm(2)
    • 42.0 mm(1)
    • 50.0 mm(2)
    • 50.8 mm(1)
    • 52.0 mm(1)
    • 63.0 mm(2)
    • 63.5 mm(1)
    • 66.0 mm(1)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.6 mm(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.25 in(3)
    • 1.26 in(3)
    • 1.378 in(1)
    • 1.5 in(3)
    • 1.575 in(2)
    • 1.654 in(1)
    • 1.969 in(2)
    • 2.0 in(1)
    • 2.047 in(1)
    • 2.48 in(2)
    • 2.5 in(1)
    • 2.598 in(1)
    • 3.0 in(2)
    • 3.15 in(2)
    • 3.937 in(2)
    • 4.0 in(2)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 5.99 mm(27)
    • 6.0 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.236 in(29)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.5 in(2)
    • 1.575 in(9)
    • 1.772 in(2)
    • 1.969 in(9)
    • 2.0 in(7)
    Reach MinkomuReach Max
    Reach
    Reach
    • 38.1 mm(2)
    • 40.0 mm(9)
    • 45.0 mm(2)
    • 50.0 mm(9)
    • 50.8 mm(7)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (29)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (17)
    • B-Cutter Retention Screw (2)
    • Screw-On Connection (4)
    • Straight-Cylindrical (4)
    • Weldon (2)
    Number of Flutes
    Number of Flutes
    • 3 (7)
    • 4 (7)
    • 5 (4)
    • 6 (3)
    • 7 (4)
    • 8 (2)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(5)
    • 1.969 in(8)
    • 2.0 in(6)
    • 2.4646 in(2)
    • 2.736 in(2)
    • 3.976 in(1)
    • 4.28 in(1)
    • 7.0 in(1)
    • 7.48 in(1)
    • 7.874 in(1)
    • 8.0 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(5)
    • 50.0 mm(8)
    • 50.8 mm(6)
    • 62.6 mm(2)
    • 69.5 mm(2)
    • 101.0 mm(1)
    • 108.71 mm(1)
    • 177.8 mm(1)
    • 190.0 mm(1)
    • 200.0 mm(1)
    • 203.2 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.236 in(46)
    • 0.25 in(1)
    • 0.315 in(7)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 6.0 mm(46)
    • 6.35 mm(1)
    • 8.0 mm(7)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (30)
    • KC522M (32)
    • KC725M (37)
    • KCMP30 (30)
    • KCPK30 (34)
    • KCPM20 (30)
    • KCPM40 (31)
    • KCSM30 (32)
    • KCSM40 (1)
    Hand Of Tool
    Hand Of Tool
    • R (29)
    Wiper Insert
    Wiper Insert
    • N (25)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 2.6 (1)
    • 3.0 (1)
    • 3.06 (1)
    • 3.3 (1)
    • 3.5 (1)
    • 4.0 (1)
    • 4.1 (2)
    • 5.1 (1)
    • 5.7 (4)
    • 6.0 (3)
    • 6.6 (1)
    • 7.0 (1)
    • 7.7 (2)
    • 7.87 (1)
    • 8.97 (2)
    • 9.2 (2)
    • 9.8 (1)
    • 9.983 (1)
    • 10.2 (1)
    • 10.8 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (25)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(17)
    • 12.7 mm(1)
    • 16.0 mm(7)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.472 in(17)
    • 0.5 in(1)
    • 0.63 in(7)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GDX (3)
    • GE (10)
    • GP (4)
    • LE (8)
    Cutting Tool Material
    Cutting Tool Material
    • H W (25)
    Tolerance Class
    Tolerance Class
    • E (18)
    • P (7)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (6)
    • SCREW-ON (4)
    • SHELL MILL (19)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(1)
    • 22.0 mm(5)
    • 25.4 mm(3)
    • 27.0 mm(3)
    • 29.0 mm(4)
    • 31.75 mm(5)
    • 32.0 mm(5)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.6299 in(1)
    • 0.63 in(1)
    • 0.75 in(1)
    • 0.8661 in(5)
    • 1.0 in(3)
    • 1.063 in(3)
    • 1.1417 in(2)
    • 1.142 in(2)
    • 1.25 in(5)
    • 1.2598 in(3)
    • 1.26 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    KSRM™ • Daisy IC12
    Kruhové břitové destičky pro Daisy KSRM • RPET12-LEJ
    (5)

    Kruhové břitové destičky pro Daisy KSRM • RPET12-LEJ

    KSRM™ • Daisy IC12 • RP.T1204 • Face Mills • Inch
    (7)

    KSRM™ • Daisy IC12 • RP.T1204 • Face Mills • Inch

    Kruhové břitové destičky pro Daisy KSRM™ • RPET12..GE • Ground Insert
    (3)

    Kruhové břitové destičky pro Daisy KSRM™ • RPET12..GE • Ground Insert

    Kruhové břitové destičky pro Daisy KSRM™ • RPET12..-GEJ • Broušené
    (7)

    Kruhové břitové destičky pro Daisy KSRM™ • RPET12..-GEJ • Broušené

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Čelní frézy • Metrické
    (12)

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Čelní frézy • Metrické

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Stopkové frézy • Válcová stopka • Metrické
    (2)

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Stopkové frézy • Válcová stopka • Metrické

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Závitová stopka • Metrické
    (2)

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Závitová stopka • Metrické

    Kruhové břitové destičky pro Daisy KSRM • RPET12..-GDX
    (3)

    Kruhové břitové destičky pro Daisy KSRM • RPET12..-GDX

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Stopkové frézy • Stopky Weldon® • Metrické
    (1)

    KSRM™ • Daisy IC12 • KSRM™ RP.T1204 • Stopkové frézy • Stopky Weldon® • Metrické

    Kruhové břitové destičky pro Daisy KSRM™ • RPPT1204-GP • Broušené
    (4)

    Kruhové břitové destičky pro Daisy KSRM™ • RPPT1204-GP • Broušené

    Kruhové břitové destičky pro KSRM • RPET-LE
    (3)

    Kruhové břitové destičky pro KSRM • RPET-LE

    KSRM™ • Daisy IC12 • RP.T1204 • End Mills • Cylindrical • Inch
    (2)

    KSRM™ • Daisy IC12 • RP.T1204 • End Mills • Cylindrical • Inch

    KSRM™ • Daisy IC12 • RP.T1204 • End Mills • Weldon® • Inch
    (1)

    KSRM™ • Daisy IC12 • RP.T1204 • End Mills • Weldon® • Inch

    KSRM™ • Daisy IC12 • RP.T1204 • Screw-On End Mills • Inch
    (2)

    KSRM™ • Daisy IC12 • RP.T1204 • Screw-On End Mills • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk