KM80TS™ Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (6)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(6)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(6)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(6)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(6)
- M Stainless Steel (6)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(6)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(6)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(6)
- K Cast Iron (6)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(6)
- N Non-Ferrous Materials (6)
- N7MMC's (1)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N1Wrought Aluminum (6)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(6)
- S High-Temp Alloys (6)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6)
- H Hardened Materials (6)
- H1Hardened Materials 44-48 HRC(6)
- H3Hardened Materials 56-60 HRC(1)
- H2Hardened Materials 48-55 HRC(1)
Applications
Applications
Facing (6)
Multiple Direction Cutting (6)
Turning (6)
Cutting Condition Material
Cutting Condition Material
- H-All (1)
- K-All (1)
- M-All (1)
- N-All (1)
- P-All (1)
- S-All (1)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1)
- Lightly Interrupted Cut (1)
- Smooth Cut (1)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (6)
to
Connection Style
Connection Style
- KM (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (6)
to
Over All Length [L]
Over All Length [L]
- 2.7559 in(4)
- 3.1496 in(2)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(4)
- 80.0 mm(2)
to
Corner Radius
Corner Radius
- 0.197 in(6)
- 0.236 in(6)
- 0.394 in(1)
- 0.492 in(3)
- 0.63 in(2)
to
Corner Radius
Corner Radius
- 5.0 mm(6)
- 6.0 mm(6)
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG4 (1)
- CL4 (1)
- CM3 (1)
- CM5 (1)
- CPX (1)
- GX (1)
- K313 (1)
- K420 (3)
- K68 (1)
- KC5010 (1)
- KC725M (1)
- KC730 (1)
- KC735M (6)
- KC8050 (1)
- KC810 (1)
- KC850 (1)
- KC9010 (2)
- KC9110 (3)
- KC9125 (3)
- KC9240 (3)
- KC9240NEW (3)
- KC9315 (1)
- KCK15B (1)
- KCK20 (1)
- KCK20B (1)
- KCM25 (1)
- KCP10 (3)
- KCP10B (1)
- KCP25 (3)
- KCP25B (4)
- KCP30 (1)
- KCPK05 (1)
- KCPK30 (6)
- KCS10 (1)
- KCU10 (1)
- KCU25 (1)
- KM1 (1)
- KT175 (1)
- KY1615 (1)
- MC2 (1)
- NL300 (2)
- NL920 (1)
- WU20PM (6)
Hand Of Tool
Hand Of Tool
- L (2)
- N (2)
- R (2)
Wiper Insert
Wiper Insert
- N (6)
F Dimension
F Dimension
- 10.0 mm(1)
- 12.5 mm(1)
- 53.0 mm(4)
to
F Dimension
F Dimension
- 0.3937 in(1)
- 0.4921 in(1)
- 2.0866 in(4)
to
Cutting Direction
Cutting Direction
- E (2)
- S (4)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (4)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (26)
Clamp Style
Clamp Style
- P (6)
Front End Type
Front End Type
- MCS - Modular Cartridge System (26)
Insert Shape
Insert Shape
- R-ROUND (6)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (26)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.5807 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 40.15 mm(2)
to
Gage Length
Gage Length
- 1.1020 in(2)
- 1.4960 in(2)
- 1.8500 in(6)
- 1.8900 in(4)
- 2.2440 in(4)
- 2.2830 in(4)
- 2.5000 in(2)
- 2.6180 in(2)
Gage Length
Gage Length
- 28.0000 mm(2)
- 38.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(4)
- 57.0000 mm(4)
- 58.0000 mm(4)
- 63.5000 mm(2)
- 66.5000 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (1)
- H T (1)
- H W (6)
Back-End
Connection Type
Connection Type
- TAPER SHANK (6)
System Size
System Size
- KM40TS (2)
- KM50TS (4)
- KM63TS (4)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (14)
Back-End Diameter
Back-End Diameter
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(8)
- 80.0 mm(18)
to
Back-End Diameter
Back-End Diameter
- 1.5748 in(2)
- 1.9685 in(2)
- 1.97 in(2)
- 2.48 in(8)
- 3.15 in(12)
to
No filters matching ""
