Guide Pad Reaming
Master high precision with guide pads for reaming applications. Guide pads travel on a setting fixture to ensure alignment and pressure are applied to the cutting surface, which helps achieve the desired hole size, geometry, and a smooth surface finish. The reaming inserts are great for machining almost all materials. You can choose two unique padded systems: the Reamer Insert Rectangular (RIR™) for small diameters and the Reamer Insert Quattro Cut™ (RIQ Quatro Cut™) for easy setup of larger diameters. Additionally, the RIR pocket seats are flat with a clamping groove in the blade and the RIQ seat is serrated for greater stability. These reamer pads and setting fixtures improve machining efficiency and quality, making them indispensable tools in reaming operations.
- P Steel (3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- K Cast Iron (3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- S High-Temp Alloys (2)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
ID Thread Turning (1)
- 2.0 (3)
- 4.0 (66)
- 0.008 in(1)
- 0.016 in(3)
- 0.02 in(2)
- 0.2 mm(1)
- 0.4 mm(3)
- 0.5 mm(2)
- 0.0 mm(69)
- 0.0 in(69)
- KB1610 (2)
- KBHK10 (5)
- KBHK15 (5)
- KC6005 (18)
- KC6105 (17)
- KC6305 (15)
- KD1415 (4)
- KT6225 (1)
- KT6315 (2)
- N (69)
- L-RECTANGLE 90 (3)
- S-SQUARE 90 (66)
- L-RECTANGLE 90 (3)
- S-SQUARE 90 (66)
- 6.0 mm(31)
- 6.5 mm(2)
- 7.0 mm(2)
- 8.0 mm(2)
- 9.0 mm(29)
- 0.236 in(31)
- 0.256 in(2)
- 0.276 in(2)
- 0.315 in(2)
- 0.354 in(29)
- 6.0 mm(5)
- 6.5 mm(2)
- 7.0 mm(2)
- 8.0 mm(2)
- 9.0 mm(4)
- 9.043 mm(1)
- 14.475 mm(1)
- 27.0 mm(1)
- 45.0 mm(1)
- 0.236 in(1)
- 0.2362 in(4)
- 0.2559 in(2)
- 0.2756 in(2)
- 0.315 in(2)
- 0.354 in(3)
- 0.3543 in(1)
- 0.356 in(1)
- 0.5699 in(1)
- 1.063 in(1)
- 1.772 in(1)
- FB (1)
- FT (2)
- S (10)
- B H (12)
- D P (4)
- H T (3)
- H W (50)
