Drill Fix DFR • Inserts
The Drill Fix DFR platform offers maximum feed rates in holemaking applications. The inserts are rectangular-shaped inboard and outboard inserts enabling soft starting cuts and short chips for higher feed rates than small-size symmetrical-trigon or square inserts. Drill Fix DFR's low cutting forces provide long tool body life and the highest stability at the smallest sizes. The same insert size can be used for each pocket, reducing inventory costs.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
- M Stainless Steel (18)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(18)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(18)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(18)
- K Cast Iron (21)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
- N Non-Ferrous Materials (13)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
- N7MMC's (6)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(10)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (10)
- N1Wrought Aluminum (10)
- N6Carbon, Graphite Composites, CFRP (4)
- S High-Temp Alloys (18)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(18)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(18)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(18)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(18)
Select First Choice
- BR (6)
- CN (15)
- DE (15)
- GB (15)
- IN (3)
- SG (14)
- US (15)
Applications
Applications
ID Thread Turning (3)
Cutting Condition Material
Cutting Condition Material
- K1 (18)
- K2 (18)
- K3 (18)
- M1 (24)
- M2 (24)
- M3 (24)
- N1 (16)
- N2 (16)
- N3 (16)
- N4 (16)
- N5 (13)
- N6 (9)
- N7 (9)
- P0 (27)
- P1 (27)
- P2 (21)
- P3 (18)
- P4 (18)
- P5 (18)
- P6 (18)
- S1 (27)
- S2 (27)
- S3 (27)
- S4 (27)
Cutting Condition
Cutting Condition
- Interrupted (18)
- Stable (28)
- Unstable (27)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (1)
- 2.0 (27)
to
Corner Radius
Corner Radius
- 0.016 in(28)
to
Corner Radius
Corner Radius
- 0.4 mm(28)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(28)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(28)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7140 (9)
- KCPK10 (3)
- KCU25 (6)
- KCU40 (9)
- KD1425 (1)
Wiper Insert
Wiper Insert
- N (28)
Drilling Condition Material
Drilling Condition Material
- K1 (18)
- K2 (18)
- K3 (18)
- M1 (24)
- M2 (24)
- M3 (24)
- N1 (16)
- N2 (16)
- N3 (16)
- N4 (16)
- N5 (13)
- N6 (9)
- N7 (9)
- P0 (27)
- P1 (27)
- P2 (21)
- P3 (18)
- P4 (18)
- P5 (18)
- P6 (18)
- S1 (27)
- S2 (27)
- S3 (27)
- S4 (27)
Front-End
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (28)
Insert Geometry
Insert IC Size
Insert IC Size
- 6.0 mm(19)
- 8.0 mm(10)
to
Insert IC Size
Insert IC Size
- 0.236 in(19)
- 0.315 in(10)
to
Chip Breaker CBMD
Chip Breaker CBMD
- GD (12)
- LD (6)
- MD (11)
Cutting Tool Material
Cutting Tool Material
- D P (1)
- H W (27)
No filters matching ""
