Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (9)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(9)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(9)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(9)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(9)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(9)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(9)
- M Stainless Steel (9)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(9)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(9)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(9)
- K Cast Iron (9)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(9)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(9)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(9)
- S High-Temp Alloys (4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- H Hardened Materials (5)
- H1Hardened Materials 44-48 HRC(5)
Applications
Applications
ID Thread Turning (7)
OD Thread Turning (10)
Type of Thread
Type of Thread
- BSW (7)
- M (3)
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC610M (4)
- KC620M (1)
- KC635M (5)
Countersunk Angle
Countersunk Angle
- 27.5 (7)
- 30.0 (3)
to
Front-End
Cutting Width
Cutting Width
- 0.37 in(1)
- 0.55 in(2)
- 0.57 in(2)
- 0.58 in(1)
- 0.59 in(2)
- 0.91 in(1)
- 0.94 in(1)
to
Cutting Width
Cutting Width
- 9.398 mm(1)
- 13.97 mm(2)
- 14.478 mm(2)
- 14.732 mm(1)
- 14.986 mm(2)
- 23.114 mm(1)
- 23.876 mm(1)
to
Thread TPI
Thread TPI
- 11.0 (3)
- 12.0 (1)
- 14.0 (2)
- 19.0 (1)
to
Thread Pitch
Thread Pitch
- 1.5 mm(2)
- 2.0 mm(1)
to
Thread Pitch
Thread Pitch
- 1.5 in(2)
- 2.0 in(1)
to
Insert Geometry
Insert IC Size
Insert IC Size
- 6.35 mm(1)
- 9.525 mm(7)
- 15.875 mm(2)
to
Insert IC Size
Insert IC Size
- 0.25 in(1)
- 0.375 in(7)
- 0.625 in(2)
to
No filters matching ""
