TM731
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- K Cast Iron (7)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
- N Non-Ferrous Materials (7)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
Applications
Applications
Countersinking (7)
Drilling (7)
Thread Milling (7)
Threading (7)
Cutting Diameter
Cutting Diameter
- 0.1244 in(1)
- 0.1591 in(1)
- 0.189 in(1)
- 0.2559 in(1)
- 0.3228 in(1)
- 0.3898 in(1)
- 0.5354 in(1)
to
Cutting Diameter
Cutting Diameter
- 3.16 mm(1)
- 4.04 mm(1)
- 4.8 mm(1)
- 6.5 mm(1)
- 8.2 mm(1)
- 9.9 mm(1)
- 13.6 mm(1)
to
Thread Size
Thread Size
- M10X1.5 (1)
- M12X1.75 (1)
- M16X2 (1)
- M4X0.7 (1)
- M5X0.8 (1)
- M6X1 (1)
- M8X1.25 (1)
Reach
Reach
- 0.3776 in(1)
- 0.4654 in(1)
- 0.5783 in(1)
- 0.7252 in(1)
- 0.9311 in(1)
- 1.0878 in(1)
- 1.4961 in(1)
to
Reach
Reach
- 9.59 mm(1)
- 11.82 mm(1)
- 14.69 mm(1)
- 18.42 mm(1)
- 23.65 mm(1)
- 27.63 mm(1)
- 38.0 mm(1)
to
Over All Length [L]
Over All Length [L]
- 1.9291 in(1)
- 2.1654 in(1)
- 2.4409 in(1)
- 2.9134 in(1)
- 3.1102 in(1)
- 3.5039 in(1)
- 4.0157 in(1)
to
Over All Length [L]
Over All Length [L]
- 49.0 mm(1)
- 55.0 mm(1)
- 62.0 mm(1)
- 74.0 mm(1)
- 79.0 mm(1)
- 89.0 mm(1)
- 102.0 mm(1)
to
Front-End
Thread Pitch
Thread Pitch
- 0.7 mm(1)
- 0.8 mm(1)
- 1.0 mm(1)
- 1.25 mm(1)
- 1.5 mm(1)
- 1.75 mm(1)
- 2.0 mm(1)
to
Thread Pitch
Thread Pitch
- 0.7 in(1)
- 0.8 in(1)
- 1.0 in(1)
- 1.25 in(1)
- 1.5 in(1)
- 1.75 in(1)
- 2.0 in(1)
to
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(2)
- 8.0 mm(1)
- 10.0 mm(1)
- 12.0 mm(1)
- 14.0 mm(1)
- 18.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.2362 in(2)
- 0.315 in(1)
- 0.3937 in(1)
- 0.4724 in(1)
- 0.5512 in(1)
- 0.7087 in(1)
to
No filters matching ""
