Kenlever™ • P-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (144)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(144)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(144)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(144)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(144)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(144)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(144)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(144)
- M Stainless Steel (144)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(144)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(144)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(144)
- K Cast Iron (144)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(144)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(144)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(144)
- N Non-Ferrous Materials (141)
- N6Carbon, Graphite Composites, CFRP (107)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (136)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(139)
- N3High-Silicon Aluminum Alloys Si >12.2%(41)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (134)
- N7MMC's (134)
- N1Wrought Aluminum (139)
- S High-Temp Alloys (144)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(144)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(144)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(141)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(144)
- H Hardened Materials (102)
- H2Hardened Materials 48-55 HRC(97)
- H4Hardened Materials >60 HRC(67)
- H1Hardened Materials 44-48 HRC(102)
- H3Hardened Materials 56-60 HRC(97)
Applications
Applications
Facing (123)
Multiple Direction Cutting (89)
Profiling (75)
TRN Boring (8)
Turning (144)
Cutting Condition Material
Cutting Condition Material
- H-All (97)
- K-All (136)
- K1 (49)
- M-All (139)
- N-All (96)
- P-All (139)
- S-All (137)
- S2 (94)
- S4 (21)
Type of Thread
Type of Thread
- 60 (1)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (139)
- Interrupted (122)
- Lightly Interrupted Cut (139)
- Smooth Cut (139)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (24)
- 63.0 (5)
- 75.0 (45)
- 90.0 (16)
- 93.0 (20)
- 95.0 (34)
to
Connection Style
Connection Style
- KM (14)
- Toolholder (122)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (55)
- 2.0 (72)
- 3.0 (16)
- 4.0 (116)
- 6.0 (22)
- 8.0 (91)
to
Over All Length [L]
Over All Length [L]
- 1.378 in(8)
- 2.362 in(1)
- 2.3622 in(7)
- 2.7559 in(4)
- 3.1496 in(2)
- 3.937 in(9)
- 4.921 in(17)
- 4.9213 in(7)
- 5.905 in(1)
- 5.9055 in(4)
- 5.906 in(30)
- 6.6929 in(6)
- 6.693 in(33)
- 6.694 in(2)
- 7.874 in(2)
- 9.843 in(11)
to
Over All Length [L]
Over All Length [L]
- 35.0 mm(8)
- 60.0 mm(8)
- 70.0 mm(4)
- 80.0 mm(2)
- 100.0 mm(9)
- 124.99 mm(2)
- 125.0 mm(22)
- 149.99 mm(1)
- 150.0 mm(34)
- 169.99 mm(2)
- 170.0 mm(37)
- 170.03 mm(2)
- 200.0 mm(2)
- 250.0 mm(11)
to
Corner Radius
Corner Radius
- 0.004 in(58)
- 0.008 in(52)
- 0.014 in(14)
- 0.016 in(99)
- 0.024 in(6)
- 0.031 in(135)
- 0.047 in(135)
- 0.062 in(21)
- 0.063 in(116)
- 0.094 in(78)
- 0.125 in(2)
- 0.126 in(30)
- 0.157 in(13)
- 0.197 in(6)
- 0.236 in(6)
- 0.394 in(1)
- 0.492 in(3)
- 0.63 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(58)
- 0.2 mm(52)
- 0.35 mm(14)
- 0.4 mm(99)
- 0.6 mm(6)
- 0.8 mm(135)
- 1.2 mm(135)
- 1.575 mm(21)
- 1.6 mm(116)
- 2.375 mm(12)
- 2.4 mm(78)
- 3.175 mm(2)
- 3.2 mm(30)
- 4.0 mm(13)
- 5.0 mm(6)
- 6.0 mm(6)
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (88)
- 241 (21)
- CG4 (1)
- CL4 (88)
- CM2 (87)
- CM3 (90)
- CM4 (58)
- CM5 (1)
- CPX (102)
- CW2 (43)
- CW2015 (6)
- CW5025 (7)
- GX (68)
- HK1500 (8)
- HT2 (46)
- HTX (29)
- K060 (46)
- K090 (112)
- K1 (50)
- K10M (113)
- K10P (102)
- K10U (70)
- K15U (68)
- K20K (124)
- K21 (75)
- K25M (97)
- K25P (106)
- K313 (134)
- K35P (72)
- K420 (99)
- K45 (48)
- K68 (113)
- KB1340 (49)
- KB1345 (29)
- KB1610 (52)
- KB1625 (46)
- KB1630 (29)
- KB5610 (27)
- KB5625 (46)
- KB5630 (21)
- KB9610 (66)
- KB9640 (55)
- KBH10 (66)
- KBH10B (43)
- KBH20 (66)
- KBH20B (43)
- KBK35 (21)
- KC210 (81)
- KC250 (79)
- KC5010 (136)
- KC5025 (133)
- KC5410 (107)
- KC5510 (133)
- KC5525 (60)
- KC710 (22)
- KC720 (79)
- KC722 (21)
- KC725M (80)
- KC730 (113)
- KC7310 (133)
- KC732 (66)
- KC735M (6)
- KC8050 (139)
- KC810 (130)
- KC850 (133)
- KC9010 (140)
- KC9025 (138)
- KC910 (118)
- KC9105 (120)
- KC9110 (141)
- KC9120 (129)
- KC9125 (141)
- KC9125RR (17)
- KC9140 (138)
- KC9145 (108)
- KC9210 (14)
- KC9215 (135)
- KC9225 (135)
- KC9240 (139)
- KC9240NEW (139)
- KC9245 (133)
- KC9315 (136)
- KC9320 (133)
- KC9325 (133)
- KC935 (135)
- KC950 (118)
- KC990 (135)
- KCK05 (135)
- KCK05B (118)
- KCK15 (133)
- KCK15B (136)
- KCK20 (134)
- KCK20B (134)
- KCM15 (133)
- KCM15B (120)
- KCM25 (137)
- KCM25B (136)
- KCM35 (122)
- KCM35B (120)
- KCP05 (99)
- KCP05B (83)
- KCP10 (141)
- KCP10B (139)
- KCP25 (141)
- KCP25B (142)
- KCP25C (135)
- KCP30 (139)
- KCP30B (125)
- KCP40 (119)
- KCP40B (125)
- KCPK05 (120)
- KCPK30 (6)
- KCS10 (22)
- KCS10B (117)
- KCU10 (136)
- KCU25 (134)
- KD050 (48)
- KD081 (48)
- KD100 (21)
- KD120 (48)
- KD1400 (35)
- KD1405 (21)
- KD1425 (35)
- KM1 (62)
- KMF (21)
- KS15 (21)
- KT1120 (21)
- KT125 (62)
- KT150 (48)
- KT175 (63)
- KT315 (87)
- KT325 (54)
- KT5020 (8)
- KU10T (85)
- KU30T (133)
- KY1310 (73)
- KY1320 (103)
- KY1540 (54)
- KY1615 (91)
- KY2000 (72)
- KY2100 (38)
- KY3000 (110)
- KY3400 (102)
- KY3500 (116)
- KY4000 (50)
- KY4300 (47)
- KY4400 (94)
- KYHK15B (94)
- KYK10 (52)
- KYK25 (89)
- KYK35 (116)
- KYS25 (52)
- KYS30 (58)
- MC2 (1)
- NL200 (35)
- NL250 (127)
- NL300 (112)
- NL400 (66)
- NL920 (107)
- P25 (40)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (46)
- SP0819 (99)
- SP0A00 (1)
- SP3019 (107)
- SP4019 (86)
- SP61EJ (17)
- SPADAP (27)
- SPN4W2 (2)
- SPSREJ (9)
- THM (7)
- THM-X (3)
- THMF-X (5)
- TN10P (12)
- TN10U (6)
- TN15M (10)
- TN15U (6)
- TN2000 (10)
- TN20K (12)
- TN20P (16)
- TN30M (14)
- TN30P (10)
- TN4000 (10)
- TN5015 (14)
- TN5020 (12)
- TN5105 (10)
- TN5120 (12)
- TN6010 (2)
- TN6025 (5)
- TN7005 (6)
- TN7010 (14)
- TN7015 (14)
- TN7025 (14)
- TN7035 (16)
- TN7105 (10)
- TN7110 (10)
- TN7115 (12)
- TN7125 (14)
- TN7135 (10)
- TN8025 (14)
- TTI15 (6)
- TTM (1)
- TTM09 (6)
- TTR (4)
- TTR-X (2)
- TTS (7)
- TTX (5)
- W00342 (2)
- WBH10C (3)
- WBH10P (2)
- WBH10U (5)
- WBH20P (5)
- WBH25P (5)
- WBH25U (5)
- WBH30P (2)
- WBK40U (7)
- WBK45U (4)
- WDN00U (2)
- WDN25U (4)
- WK05CT (16)
- WK15CT (9)
- WK20CT (16)
- WM15CT (16)
- WM25CT (16)
- WM35CT (16)
- WP05CT (2)
- WP15CT (16)
- WP20TT (4)
- WP25CT (16)
- WP35CT (16)
- WS10PT (14)
- WS25PT (16)
- WU10HT (14)
- WU10PT (11)
- WU20PM (6)
- WU25PT (11)
- X00511 (21)
- X00580 (21)
- X00581 (21)
- X00582 (21)
- X00583 (21)
- X00584 (21)
- X00585 (21)
- X00586 (21)
- X00591 (21)
- X00592 (21)
- X00593 (21)
- X00594 (21)
- X00596 (21)
- X00597 (21)
- X00599 (21)
Hand Of Tool
Hand Of Tool
- L (62)
- N (8)
- R (66)
Wiper Insert
Wiper Insert
- N (144)
- Y (97)
F Dimension
F Dimension
- 8.0 mm(1)
- 10.0 mm(4)
- 12.5 mm(6)
- 16.0 mm(1)
- 17.0 mm(3)
- 20.0 mm(9)
- 22.0 mm(8)
- 25.0 mm(18)
- 27.0 mm(13)
- 32.0 mm(41)
- 35.0 mm(6)
- 40.0 mm(15)
- 43.0 mm(3)
- 50.0 mm(4)
- 53.0 mm(4)
to
F Dimension
F Dimension
- 0.315 in(1)
- 0.3937 in(4)
- 0.4921 in(6)
- 0.6299 in(1)
- 0.6693 in(3)
- 0.787 in(3)
- 0.7874 in(6)
- 0.866 in(1)
- 0.8661 in(7)
- 0.984 in(2)
- 0.9843 in(16)
- 1.063 in(13)
- 1.2598 in(30)
- 1.26 in(11)
- 1.378 in(6)
- 1.5748 in(10)
- 1.575 in(5)
- 1.6929 in(3)
- 1.9685 in(2)
- 1.969 in(2)
- 2.0866 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 40.0 mm(4)
- 44.0 mm(2)
- 74.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.575 in(4)
- 1.732 in(2)
- 2.913 in(2)
to
Cutting Direction
Cutting Direction
- B (30)
- E (17)
- S (89)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (85)
- NEGATIVE-ZERO (20)
- NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
- 1.378 in(8)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(8)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (47)
- D-DIAMOND/RHOMBIC 55 (25)
- R-ROUND (6)
- S-SQUARE 90 (44)
- T-TRIANGLE 60 (10)
- W-TRIGON 80 (12)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.5807 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 40.15 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (65)
- B L (68)
- C A (119)
- C N (118)
- D P (49)
- H T (88)
- H W (144)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (122)
- TAPER SHANK (14)
System Size
System Size
- KM63TS (8)
- KM80TS (6)
Back-End Diameter
Back-End Diameter
- 32.0 mm(8)
- 63.0 mm(8)
- 80.0 mm(6)
to
Shank Height
Shank Height
- 0.6299 in(6)
- 0.63 in(3)
- 0.787 in(2)
- 0.7874 in(22)
- 0.984 in(5)
- 0.9843 in(30)
- 1.2597 in(1)
- 1.2598 in(29)
- 1.26 in(11)
- 1.5748 in(11)
- 1.575 in(2)
to
Shank Height
Shank Height
- 16.0 mm(9)
- 20.0 mm(24)
- 25.0 mm(35)
- 32.0 mm(41)
- 40.0 mm(13)
to
Shank Width
Shank Width
- 0.6299 in(6)
- 0.63 in(3)
- 0.787 in(2)
- 0.7874 in(22)
- 0.984 in(11)
- 0.9843 in(43)
- 1.2597 in(1)
- 1.2598 in(18)
- 1.26 in(5)
- 1.5748 in(9)
- 1.575 in(2)
to
Shank Width
Shank Width
- 16.0 mm(9)
- 20.0 mm(24)
- 25.0 mm(54)
- 32.0 mm(24)
- 40.0 mm(11)
to
No filters matching ""
