Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (104)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
- M Stainless Steel (104)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
- K Cast Iron (104)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
- N Non-Ferrous Materials (104)
- N6Carbon, Graphite Composites, CFRP (104)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(104)
- N1Wrought Aluminum (104)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (104)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (104)
- N7MMC's (52)
- N3High-Silicon Aluminum Alloys Si >12.2%(52)
- S High-Temp Alloys (104)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
- H Hardened Materials (104)
- H1Hardened Materials 44-48 HRC(104)
- H2Hardened Materials 48-55 HRC(104)
- H4Hardened Materials >60 HRC(69)
- H3Hardened Materials 56-60 HRC(69)
Select First Choice
- BR (8)
- CN (53)
- DE (53)
- GB (26)
- IN (1)
- SG (13)
- US (90)
Applications
Applications
Chamfer Turning (52)
Cut-Off (63)
Deep Grooving (52)
Facing (52)
Grooving (160)
Multiple Direction Cutting (149)
Profiling (160)
Turning (160)
Cutting Condition Material
Cutting Condition Material
- H-All (104)
- K-All (104)
- M-All (104)
- N-All (104)
- P-All (104)
- S-All (104)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (104)
- Lightly Interrupted Cut (104)
- Smooth Cut (104)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (83)
- 92.25 (25)
to
Connection Style
Connection Style
- Toolholder (108)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (69)
- 2.0 (104)
to
Over All Length [L]
Over All Length [L]
- 4.5 in(10)
- 4.9213 in(19)
- 4.9234 in(1)
- 4.9331 in(5)
- 4.934 in(1)
- 5.0 in(18)
- 5.9055 in(12)
- 5.9173 in(4)
- 5.918 in(2)
- 6.0 in(25)
- 6.6929 in(10)
- 7.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 114.3 mm(10)
- 125.0 mm(21)
- 125.3 mm(5)
- 127.0 mm(18)
- 150.0 mm(14)
- 150.3 mm(4)
- 152.4 mm(25)
- 170.0 mm(10)
- 177.8 mm(1)
to
Corner Radius
Corner Radius
- 0.008 in(60)
- 0.016 in(81)
- 0.031 in(61)
- 0.033 in(17)
- 0.039 in(23)
- 0.041 in(23)
- 0.047 in(29)
- 0.048 in(8)
- 0.059 in(20)
- 0.06 in(20)
- 0.063 in(20)
- 0.079 in(17)
- 0.08 in(17)
- 0.094 in(17)
- 0.098 in(15)
- 0.099 in(15)
- 0.118 in(17)
- 0.119 in(17)
- 0.125 in(17)
- 0.156 in(8)
- 0.157 in(8)
- 0.158 in(8)
- 0.187 in(4)
- 0.188 in(4)
- 0.197 in(4)
- 0.198 in(4)
to
Corner Radius
Corner Radius
- 0.2 mm(60)
- 0.4 mm(81)
- 0.8 mm(61)
- 0.85 mm(17)
- 1.0 mm(23)
- 1.05 mm(23)
- 1.2 mm(29)
- 1.225 mm(8)
- 1.5 mm(20)
- 1.525 mm(20)
- 1.6 mm(20)
- 2.0 mm(17)
- 2.025 mm(17)
- 2.375 mm(17)
- 2.5 mm(15)
- 2.525 mm(15)
- 3.0 mm(17)
- 3.025 mm(17)
- 3.175 mm(17)
- 3.975 mm(8)
- 4.0 mm(8)
- 4.025 mm(8)
- 4.75 mm(4)
- 4.775 mm(4)
- 5.0 mm(4)
- 5.025 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K1025 (42)
- K313 (104)
- KB1630 (69)
- KB5625 (69)
- KBH20 (69)
- KC5010 (104)
- KC5025 (104)
- KC9110 (104)
- KC9125 (104)
- KCK20 (81)
- KCP10 (104)
- KCP25 (104)
- KCU10 (104)
- KCU25 (104)
- KD1405 (52)
- KMS (35)
- KT315 (92)
- KU10 (104)
- KU30T (69)
- KY3500 (81)
- KYS30 (40)
- SP88F8 (17)
Hand Of Tool
Hand Of Tool
- L (75)
- R (85)
Wiper Insert
Wiper Insert
- N (104)
F Dimension
F Dimension
- 12.74 mm(2)
- 12.79 mm(2)
- 12.85 mm(2)
- 15.92 mm(1)
- 15.97 mm(4)
- 16.02 mm(1)
- 16.2 mm(3)
- 19.03 mm(1)
- 19.08 mm(3)
- 19.101 mm(1)
- 19.134 mm(6)
- 19.234 mm(3)
- 20.11 mm(14)
- 20.2 mm(13)
- 20.21 mm(2)
- 20.3 mm(2)
- 25.11 mm(8)
- 25.2 mm(6)
- 25.21 mm(4)
- 25.3 mm(2)
- 25.335 mm(2)
- 25.43 mm(2)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.584 mm(3)
- 25.71 mm(3)
to
F Dimension
F Dimension
- 0.5016 in(2)
- 0.5035 in(2)
- 0.5059 in(2)
- 0.6268 in(1)
- 0.6287 in(4)
- 0.6307 in(1)
- 0.637 in(1)
- 0.6378 in(2)
- 0.7492 in(1)
- 0.7512 in(3)
- 0.752 in(1)
- 0.7533 in(6)
- 0.7572 in(3)
- 0.7917 in(14)
- 0.7953 in(13)
- 0.7957 in(2)
- 0.7992 in(2)
- 0.9886 in(8)
- 0.9921 in(6)
- 0.9925 in(4)
- 0.9961 in(2)
- 0.9974 in(2)
- 1.0012 in(2)
- 1.0033 in(7)
- 1.0039 in(1)
- 1.0072 in(3)
- 1.0122 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1.063 in(4)
- 1.102 in(4)
- 1.339 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 27.0 mm(4)
- 28.0 mm(4)
- 34.0 mm(3)
to
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (18)
- POSITIVE-ZERO (124)
Front-End
Clamp Style
Clamp Style
- Y (108)
Cutting Width
Cutting Width
- 0.078 in(23)
- 0.079 in(23)
- 0.0807 in(23)
- 0.084 in(23)
- 0.118 in(20)
- 0.119 in(20)
- 0.12 in(20)
- 0.125 in(20)
- 0.128 in(20)
- 0.157 in(17)
- 0.1575 in(17)
- 0.158 in(17)
- 0.159 in(17)
- 0.187 in(17)
- 0.1875 in(17)
- 0.19 in(17)
- 0.197 in(15)
- 0.198 in(15)
- 0.199 in(15)
- 0.236 in(17)
- 0.2382 in(17)
- 0.25 in(17)
- 0.253 in(17)
- 0.311 in(8)
- 0.312 in(8)
- 0.313 in(8)
- 0.315 in(8)
- 0.316 in(8)
- 0.3169 in(8)
- 0.375 in(4)
- 0.379 in(4)
- 0.394 in(4)
- 0.3957 in(4)
to
Cutting Width
Cutting Width
- 1.99 mm(23)
- 2.0 mm(23)
- 2.05 mm(23)
- 2.12 mm(23)
- 3.0 mm(20)
- 3.05 mm(20)
- 3.175 mm(20)
- 3.18 mm(20)
- 3.251 mm(20)
- 4.0 mm(17)
- 4.05 mm(17)
- 4.76 mm(17)
- 4.761 mm(17)
- 4.762 mm(17)
- 4.826 mm(17)
- 5.0 mm(15)
- 5.05 mm(15)
- 6.0 mm(17)
- 6.05 mm(17)
- 6.35 mm(17)
- 6.426 mm(17)
- 7.937 mm(8)
- 7.938 mm(8)
- 7.94 mm(8)
- 8.0 mm(8)
- 8.026 mm(8)
- 8.05 mm(8)
- 9.52 mm(4)
- 9.525 mm(4)
- 9.53 mm(4)
- 9.627 mm(4)
- 10.0 mm(4)
- 10.05 mm(4)
to
Insert Shape
Insert Shape
- PRISMATIC (108)
Insert Size
Insert Size
- 10 (4)
- 2 (19)
- 3 (17)
- 4 (17)
- 5 (15)
- 6 (17)
- 8 (8)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.315 in(6)
- 0.3937 in(5)
- 0.5315 in(4)
- 0.55 in(1)
- 0.551 in(1)
- 0.5512 in(20)
- 0.5709 in(4)
- 0.6693 in(25)
- 0.689 in(3)
- 0.748 in(4)
- 0.7874 in(15)
- 0.8661 in(4)
- 0.9449 in(4)
- 1.0236 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 8.0 mm(5)
- 8.001 mm(1)
- 10.0 mm(5)
- 13.5 mm(4)
- 14.0 mm(22)
- 14.5 mm(4)
- 17.0 mm(25)
- 17.5 mm(3)
- 19.0 mm(4)
- 20.0 mm(15)
- 22.0 mm(4)
- 24.0 mm(4)
- 25.999 mm(6)
- 26.0 mm(6)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (69)
- B L (69)
- C N (81)
- D P (52)
- H T (92)
- H W (104)
Back-End
Shank Height
Shank Height
- 0.5 in(6)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(2)
- 0.63 in(1)
- 0.75 in(22)
- 0.7874 in(37)
- 0.9843 in(32)
- 1.0 in(30)
- 1.25 in(9)
- 1.2598 in(10)
- 1.5 in(1)
to
Shank Height
Shank Height
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(4)
- 19.05 mm(22)
- 20.0 mm(37)
- 25.0 mm(32)
- 25.4 mm(30)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(1)
to
Shank Width
Shank Width
- 0.5 in(6)
- 0.624 in(1)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(3)
- 0.743 in(1)
- 0.75 in(21)
- 0.7874 in(36)
- 0.9843 in(42)
- 1.0 in(30)
- 1.25 in(9)
- 1.5 in(1)
to
Shank Width
Shank Width
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(5)
- 18.86 mm(1)
- 19.05 mm(21)
- 20.0 mm(36)
- 25.0 mm(42)
- 25.4 mm(30)
- 31.75 mm(9)
- 38.1 mm(1)
to
No filters matching ""
