Soluciones de biselado KSEM
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (54)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(54)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(54)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(54)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(54)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(54)
- M Stainless Steel (54)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(54)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(54)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(54)
- K Cast Iron (54)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(54)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(54)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(54)
- N Non-Ferrous Materials (54)
- N1Wrought Aluminum (54)
- N3High-Silicon Aluminum Alloys Si >12.2%(54)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (54)
- N6Carbon, Graphite Composites, CFRP (54)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (54)
- N7MMC's (54)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(54)
- S High-Temp Alloys (54)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(54)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(54)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(54)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(54)
- H Hardened Materials (29)
- H4Hardened Materials >60 HRC(29)
- H3Hardened Materials 56-60 HRC(29)
- H1Hardened Materials 44-48 HRC(29)
- H2Hardened Materials 48-55 HRC(29)
Applications
Applications
Countersinking (42)
Drilling (42)
Cutting Diameter
Cutting Diameter
- 0.4921 in(1)
- 0.4961 in(1)
- 0.5 in(1)
- 0.5039 in(1)
- 0.509 in(1)
- 0.5091 in(1)
- 0.5354 in(1)
- 0.5394 in(1)
- 0.5433 in(1)
- 0.5469 in(1)
- 0.547 in(1)
- 0.5748 in(1)
- 0.578 in(1)
- 0.5827 in(1)
- 0.6299 in(1)
- 0.6315 in(1)
- 0.6335 in(1)
- 0.6339 in(1)
- 0.634 in(1)
- 0.6358 in(1)
- 0.6374 in(1)
- 0.6378 in(1)
- 0.6406 in(1)
- 0.641 in(1)
- 0.7189 in(1)
- 0.719 in(1)
- 0.7205 in(1)
- 0.724 in(1)
- 0.7874 in(1)
- 0.7886 in(1)
- 0.7913 in(1)
- 0.7969 in(1)
- 0.797 in(1)
- 0.8012 in(1)
- 0.8701 in(1)
- 0.872 in(1)
- 0.875 in(1)
- 0.8752 in(1)
- 0.8835 in(1)
- 0.884 in(1)
- 0.9567 in(1)
- 1.031 in(1)
- 1.0311 in(1)
- 1.0354 in(1)
- 1.094 in(1)
- 1.1063 in(1)
- 1.109 in(1)
- 1.1161 in(1)
- 1.1875 in(1)
- 1.2677 in(1)
- 1.2732 in(1)
- 1.422 in(1)
to
Cutting Diameter
Cutting Diameter
- 12.5 mm(1)
- 12.6 mm(1)
- 12.7 mm(1)
- 12.8 mm(1)
- 12.93 mm(1)
- 13.6 mm(1)
- 13.7 mm(1)
- 13.8 mm(1)
- 13.89 mm(1)
- 14.6 mm(1)
- 14.68 mm(1)
- 14.8 mm(1)
- 16.0 mm(1)
- 16.04 mm(1)
- 16.09 mm(1)
- 16.1 mm(1)
- 16.15 mm(1)
- 16.19 mm(1)
- 16.2 mm(1)
- 16.27 mm(1)
- 18.26 mm(1)
- 18.3 mm(1)
- 18.39 mm(1)
- 20.0 mm(1)
- 20.03 mm(1)
- 20.1 mm(1)
- 20.24 mm(1)
- 20.35 mm(1)
- 22.1 mm(1)
- 22.15 mm(1)
- 22.23 mm(1)
- 22.44 mm(1)
- 24.3 mm(1)
- 26.19 mm(1)
- 26.3 mm(1)
- 28.1 mm(1)
- 28.18 mm(1)
- 28.35 mm(1)
- 30.16 mm(1)
- 32.2 mm(1)
- 32.34 mm(1)
- 36.12 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 14.5 mm(1)
- 15.8 mm(1)
- 18.0 mm(1)
- 18.198 mm(1)
- 19.84 mm(1)
- 22.0 mm(1)
- 24.0 mm(1)
- 26.0 mm(1)
- 28.0 mm(1)
- 30.0 mm(1)
- 32.0 mm(1)
- 36.0 mm(1)
- 40.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.5709 in(1)
- 0.622 in(1)
- 0.7087 in(1)
- 0.7165 in(1)
- 0.7811 in(1)
- 0.8661 in(1)
- 0.9449 in(1)
- 1.0236 in(1)
- 1.1024 in(1)
- 1.1811 in(1)
- 1.2598 in(1)
- 1.4173 in(1)
- 1.5748 in(1)
to
Connection Style
Connection Style
- KSEM Chamfer Ring Connection (29)
- Whistle Drive 2 (2)
- Whistle Notch 2 (11)
Number of Flutes
Number of Flutes
- 2 (42)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (42)
- 3.0 (25)
to
Over All Length [L]
Over All Length [L]
- 1.5748 in(7)
- 1.6535 in(8)
- 1.8898 in(5)
- 1.9685 in(4)
- 2.126 in(4)
- 2.2047 in(1)
- 4.2197 in(1)
- 4.2204 in(1)
- 4.3047 in(1)
- 4.3146 in(1)
- 4.6421 in(1)
- 4.7335 in(1)
- 4.8248 in(1)
- 5.074 in(1)
- 5.1654 in(1)
- 5.2567 in(1)
- 5.3484 in(1)
- 6.1091 in(1)
- 6.4886 in(1)
to
Over All Length [L]
Over All Length [L]
- 40.0 mm(7)
- 42.0 mm(8)
- 48.0 mm(5)
- 50.0 mm(4)
- 54.0 mm(4)
- 56.0 mm(1)
- 107.18 mm(1)
- 107.198 mm(1)
- 109.34 mm(1)
- 109.59 mm(1)
- 117.91 mm(1)
- 120.23 mm(1)
- 122.55 mm(1)
- 128.88 mm(1)
- 131.2 mm(1)
- 133.52 mm(1)
- 135.85 mm(1)
- 155.17 mm(1)
- 164.81 mm(1)
to
Corner Radius
Corner Radius
- 0.008 in(12)
to
Corner Radius
Corner Radius
- 0.2 mm(12)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(12)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(12)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (29)
- KC7015 (46)
- KC7030 (3)
- KC7135 (5)
- KC7140 (17)
- KC7215 (30)
- KC7235 (11)
- KC7315 (46)
- KC7320 (2)
- KC7410 (10)
- KCMS15 (10)
- KCMS35 (6)
- KCPM45 (10)
- KMF (29)
Hand Of Tool
Hand Of Tool
- R (42)
Wiper Insert
Wiper Insert
- N (12)
Drill Type
Drill Type
- 86-02 (13)
- 86-04 (29)
Countersunk Angle
Countersunk Angle
- 41.0 (29)
- 45.0 (29)
to
frontEnd
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (29)
- KSEM DRILL (13)
- T-TRIANGLE 60 (25)
Point Angle
Point Angle
- 140.0 (13)
- 150.0 (5)
- 180.0 (4)
to
insertGeometry
Shape
Shape
- T-TRIANGLE 60 (12)
Insert IC Size
Insert IC Size
- 5.55 mm(3)
- 6.35 mm(3)
- 7.95 mm(3)
- 9.525 mm(3)
to
Insert IC Size
Insert IC Size
- 0.219 in(3)
- 0.25 in(3)
- 0.313 in(3)
- 0.375 in(3)
to
Cutting Edge Length
Cutting Edge Length
- 9.63 mm(3)
- 11.0 mm(3)
- 13.75 mm(3)
- 16.5 mm(3)
to
Cutting Edge Length
Cutting Edge Length
- 0.3791 in(3)
- 0.4331 in(3)
- 0.5413 in(3)
- 0.65 in(3)
to
Chip Breaker CBMD
Chip Breaker CBMD
- GD (12)
Cutting Tool Material
Cutting Tool Material
- H W (12)
Tolerance Class
Tolerance Class
- G (12)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (42)
Back-End Diameter
Back-End Diameter
- 12.5 mm(1)
- 13.0 mm(1)
- 13.5 mm(1)
- 14.0 mm(1)
- 14.5 mm(1)
- 15.0 mm(1)
- 15.5 mm(1)
- 16.0 mm(3)
- 16.5 mm(1)
- 17.0 mm(1)
- 17.5 mm(1)
- 18.0 mm(1)
- 18.5 mm(1)
- 19.0 mm(1)
- 19.5 mm(1)
- 20.0 mm(3)
- 20.5 mm(1)
- 21.0 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.5 mm(1)
- 23.0 mm(1)
- 23.5 mm(1)
- 24.0 mm(1)
- 24.5 mm(1)
- 25.0 mm(4)
- 25.5 mm(1)
- 26.0 mm(1)
- 26.5 mm(1)
- 32.0 mm(4)
- 50.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.4921 in(1)
- 0.5118 in(1)
- 0.5315 in(1)
- 0.5512 in(1)
- 0.5709 in(1)
- 0.5906 in(1)
- 0.6102 in(1)
- 0.6299 in(3)
- 0.6496 in(1)
- 0.6693 in(1)
- 0.689 in(1)
- 0.7087 in(1)
- 0.7283 in(1)
- 0.748 in(1)
- 0.7677 in(1)
- 0.7874 in(3)
- 0.8071 in(1)
- 0.8268 in(1)
- 0.8465 in(1)
- 0.8661 in(1)
- 0.8858 in(1)
- 0.9055 in(1)
- 0.9252 in(1)
- 0.9449 in(1)
- 0.9646 in(1)
- 0.9843 in(4)
- 1.0039 in(1)
- 1.0236 in(1)
- 1.0433 in(1)
- 1.2598 in(4)
- 1.9685 in(2)
to
No filters matching ""
