KM50TS™ Internal Cutting Units
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (27)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
- M Stainless Steel (27)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
- K Cast Iron (27)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
- N Non-Ferrous Materials (27)
- N3High-Silicon Aluminum Alloys Si >12.2%(25)
- N1Wrought Aluminum (27)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
- N6Carbon, Graphite Composites, CFRP (27)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (27)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
- N7MMC's (25)
- S High-Temp Alloys (27)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
- H Hardened Materials (27)
- H1Hardened Materials 44-48 HRC(27)
- H3Hardened Materials 56-60 HRC(25)
- H2Hardened Materials 48-55 HRC(27)
- H4Hardened Materials >60 HRC(25)
Applications
Applications
Facing (17)
Multiple Direction Cutting (22)
Profiling (25)
TRN Boring (25)
Turning (17)
Cutting Condition Material
Cutting Condition Material
- H-All (15)
- K-All (25)
- M-All (25)
- N-All (25)
- P-All (25)
- S-All (25)
- S4 (22)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (25)
- Lightly Interrupted Cut (25)
- Smooth Cut (25)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (3)
- 93.0 (4)
- 95.0 (20)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (25)
- 2.0 (24)
- 3.0 (3)
- 4.0 (18)
to
Over All Length [L]
Over All Length [L]
- 2.3622 in(2)
- 2.756 in(2)
- 3.1496 in(4)
- 3.5433 in(4)
- 3.937 in(2)
- 4.3307 in(7)
- 5.5118 in(6)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(2)
- 70.0 mm(2)
- 80.0 mm(4)
- 90.0 mm(4)
- 100.0 mm(2)
- 110.0 mm(7)
- 140.0 mm(6)
to
Corner Radius
Corner Radius
- 0.004 in(15)
- 0.005 in(2)
- 0.008 in(27)
- 0.016 in(27)
- 0.02 in(2)
- 0.031 in(27)
- 0.039 in(2)
- 0.047 in(12)
to
Corner Radius
Corner Radius
- 0.1 mm(15)
- 0.125 mm(2)
- 0.2 mm(27)
- 0.4 mm(27)
- 0.5 mm(2)
- 0.8 mm(27)
- 1.0 mm(2)
- 1.2 mm(12)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (13)
- CG6 (3)
- CM1 (13)
- K313 (27)
- K420 (2)
- K6 (1)
- K68 (27)
- KB1345 (5)
- KB1610 (23)
- KB1625 (2)
- KB1630 (15)
- KB5610 (21)
- KB5625 (7)
- KB5630 (13)
- KB9610 (17)
- KBH20 (3)
- KC250 (11)
- KC5010 (27)
- KC5025 (27)
- KC525M (18)
- KC5410 (25)
- KC710 (8)
- KC720 (25)
- KC725M (21)
- KC730 (27)
- KC7310 (8)
- KC732 (27)
- KC8050 (27)
- KC810 (27)
- KC850 (27)
- KC9010 (23)
- KC9025 (27)
- KC910 (27)
- KC9105 (23)
- KC9110 (27)
- KC9120 (23)
- KC9125 (27)
- KC9225 (27)
- KC9240 (25)
- KC9240NEW (25)
- KC925M (18)
- KC9315 (27)
- KC9320 (23)
- KC9325 (23)
- KC935 (27)
- KC950 (25)
- KC990 (25)
- KCD25 (25)
- KCK05 (25)
- KCK05B (2)
- KCK15 (23)
- KCK15B (23)
- KCK20 (25)
- KCK20B (25)
- KCM15 (25)
- KCM15B (18)
- KCM25 (25)
- KCM25B (23)
- KCM35 (12)
- KCP05 (25)
- KCP10 (25)
- KCP10B (27)
- KCP25 (25)
- KCP25B (27)
- KCP30 (22)
- KCPK05 (8)
- KCPK30 (18)
- KCS10 (25)
- KCS10B (25)
- KCU10 (27)
- KCU25 (27)
- KD050 (20)
- KD100 (24)
- KD105 (18)
- KD120 (21)
- KD1400 (25)
- KD1405 (22)
- KD1425 (25)
- KT125 (11)
- KT150 (11)
- KT175 (25)
- KT315 (27)
- KTP10 (25)
- KU10 (21)
- KU10T (25)
- KU30T (23)
- SP4019 (8)
- SPMQMA (3)
- THM (8)
- TN7535 (18)
- TTM08 (18)
- TTR (18)
- W00162 (8)
- WBH10C (10)
- WBH10P (21)
- WBH10U (21)
- WBH25P (23)
- WBH30P (21)
- WBK45U (21)
- WDN00U (22)
- WDN25U (25)
- WK15CM (18)
- WK20CT (23)
- WM15CT (23)
- WM25CT (21)
- WP15CT (21)
- WP25CT (25)
- WP35CM (18)
- WP40PM (18)
Hand Of Tool
Hand Of Tool
- L (13)
- R (14)
Wiper Insert
Wiper Insert
- N (27)
- Y (22)
F Dimension
F Dimension
- 7.0 mm(4)
- 9.0 mm(6)
- 11.0 mm(7)
- 13.0 mm(6)
- 17.0 mm(2)
- 27.0 mm(2)
to
F Dimension
F Dimension
- 0.2756 in(4)
- 0.354 in(2)
- 0.3543 in(4)
- 0.4331 in(7)
- 0.5118 in(6)
- 0.6693 in(2)
- 1.063 in(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 0.5118 in(4)
- 0.6299 in(4)
- 0.6300 in(2)
- 0.7874 in(7)
- 0.9843 in(6)
- 1.2598 in(2)
- 1.9685 in(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 13.0000 mm(4)
- 16.0000 mm(6)
- 20.0000 mm(7)
- 25.0000 mm(6)
- 32.0000 mm(2)
- 50.0000 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 13.0 mm(4)
- 16.0 mm(6)
- 20.0 mm(7)
- 25.0 mm(6)
- 32.0 mm(2)
- 50.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.5118 in(4)
- 0.6299 in(4)
- 0.63 in(2)
- 0.7874 in(7)
- 0.9843 in(6)
- 1.2598 in(2)
- 1.9685 in(2)
to
Cutting Direction
Cutting Direction
- B (18)
- E (7)
- P (2)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (2)
- NEGATIVE-ZERO (8)
- NEUTRAL (ZERO) (2)
- POSITIVE-ZERO (15)
Maximum Bore Depth
Maximum Bore Depth
- 1.3854 in(2)
- 1.664 in(2)
- 1.968 in(2)
- 2.2091 in(2)
- 2.362 in(4)
- 2.7602 in(2)
- 3.15 in(5)
- 3.4343 in(2)
- 3.937 in(4)
- 4.7244 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.19 mm(2)
- 42.27 mm(2)
- 50.0 mm(2)
- 56.11 mm(2)
- 60.0 mm(4)
- 70.11 mm(2)
- 80.0 mm(5)
- 87.23 mm(2)
- 100.0 mm(4)
- 120.0 mm(2)
to
Front-End
Clamp Style
Clamp Style
- N (2)
- S (25)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (18)
- D-DIAMOND/RHOMBIC 55 (4)
- N/K-PARALLELOGRAM 55 (2)
- T-TRIANGLE 60 (3)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (24)
- B L (25)
- D P (27)
- H T (27)
- H W (27)
No filters matching ""
