Beyond Evolution Boring Bars

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (52)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(52)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(52)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(52)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(52)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(52)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(52)
    • M Stainless Steel (52)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(52)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(52)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(52)
    • K Cast Iron (52)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(52)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(52)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(52)
    • N Non-Ferrous Materials (52)
      • N1
        Wrought Aluminum (52)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(52)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (52)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (52)
      • N6
        Carbon, Graphite Composites, CFRP (52)
    • S High-Temp Alloys (52)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(52)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(52)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(52)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(52)
    • H Hardened Materials (52)
      • H1
        Hardened Materials 44-48 HRC(52)
      • H2
        Hardened Materials 48-55 HRC(52)
    Applications
    Applications
    • GroovingGrooving (52)
    • ID GroovingID Grooving (52)
    • Plunge TurningPlunge Turning (40)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (52)
    • K-All (52)
    • M-All (52)
    • N-All (52)
    • P-All (52)
    • S-All (52)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (52)
    • Lightly Interrupted Cut (52)
    • Smooth Cut (52)
    • Varying Depth of Cut (52)
    Over All Length [L]
    Over All Length [L]
    • 4.921 in(8)
    • 5.906 in(12)
    • 7.087 in(12)
    • 7.874 in(12)
    • 9.843 in(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(8)
    • 150.0 mm(12)
    • 180.0 mm(12)
    • 200.0 mm(12)
    • 250.0 mm(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(52)
    • 0.016 in(24)
    • 0.031 in(8)
    • 0.039 in(16)
    • 0.041 in(16)
    • 0.047 in(16)
    • 0.059 in(16)
    • 0.061 in(16)
    • 0.063 in(16)
    • 0.065 in(16)
    • 0.079 in(8)
    • 0.081 in(8)
    • 0.094 in(8)
    • 0.096 in(8)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(52)
    • 0.4 mm(24)
    • 0.8 mm(8)
    • 1.0 mm(16)
    • 1.05 mm(16)
    • 1.2 mm(16)
    • 1.5 mm(16)
    • 1.55 mm(16)
    • 1.6 mm(16)
    • 1.65 mm(16)
    • 2.0 mm(8)
    • 2.05 mm(8)
    • 2.375 mm(8)
    • 2.45 mm(8)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (52)
    • KCK20B (52)
    • KCM35B (40)
    • KCP10B (52)
    • KCP25B (52)
    • KCU10 (52)
    • KCU25 (52)
    Hand Of Tool
    Hand Of Tool
    • L (26)
    • R (26)
    F Dimension
    F Dimension
    • 8.52 mm(4)
    • 9.0 mm(4)
    • 11.0 mm(5)
    • 11.06 mm(7)
    • 13.0 mm(6)
    • 13.94 mm(2)
    • 13.97 mm(4)
    • 17.0 mm(4)
    • 17.3 mm(6)
    • 17.5 mm(2)
    • 21.13 mm(4)
    • 22.0 mm(4)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.336 in(4)
    • 0.354 in(4)
    • 0.433 in(5)
    • 0.436 in(7)
    • 0.512 in(6)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.669 in(4)
    • 0.681 in(6)
    • 0.689 in(2)
    • 0.832 in(4)
    • 0.866 in(4)
    F Dimension Min받는 사람F Dimension Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.6250 in(4)
    • 0.6300 in(4)
    • 0.7870 in(8)
    • 0.9840 in(6)
    • 1.0000 in(2)
    • 1.2500 in(2)
    • 1.2600 in(2)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 15.8800 mm(4)
    • 16.0000 mm(4)
    • 20.0000 mm(8)
    • 25.0000 mm(6)
    • 25.4000 mm(2)
    • 31.7500 mm(2)
    • 32.0000 mm(2)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 15.88 mm(4)
    • 16.0 mm(4)
    • 20.0 mm(12)
    • 25.0 mm(10)
    • 25.4 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(4)
    • 40.0 mm(4)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.787 in(12)
    • 0.984 in(10)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(6)
    • 1.5 in(4)
    • 1.575 in(4)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (21)
    • S (31)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (34)
    • NEUTRAL (ZERO) (18)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.945 in(4)
    • 1.0 in(4)
    • 1.25 in(6)
    • 1.259 in(2)
    • 1.26 in(2)
    • 1.5 in(6)
    • 1.575 in(4)
    • 1.586 in(2)
    • 1.59 in(2)
    • 1.969 in(2)
    • 1.98 in(4)
    • 2.0 in(7)
    • 2.496 in(2)
    • 2.5 in(1)
    • 2.519 in(1)
    • 2.52 in(3)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.4 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 38.1 mm(6)
    • 40.0 mm(4)
    • 40.28 mm(2)
    • 40.3 mm(2)
    • 50.0 mm(2)
    • 50.3 mm(4)
    • 50.8 mm(7)
    • 63.4 mm(2)
    • 63.5 mm(1)
    • 64.0 mm(3)
    • 64.01 mm(1)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (28)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.063 in(12)
    • 0.0787 in(16)
    • 0.0788 in(16)
    • 0.079 in(16)
    • 0.083 in(16)
    • 0.084 in(16)
    • 0.094 in(16)
    • 0.099 in(16)
    • 0.118 in(16)
    • 0.1181 in(16)
    • 0.123 in(16)
    • 0.125 in(16)
    • 0.13 in(16)
    • 0.157 in(8)
    • 0.1574 in(8)
    • 0.1575 in(8)
    • 0.158 in(8)
    • 0.161 in(16)
    • 0.162 in(8)
    • 0.187 in(8)
    • 0.1875 in(8)
    • 0.192 in(8)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(12)
    • 2.0 mm(16)
    • 2.12 mm(16)
    • 2.125 mm(16)
    • 2.387 mm(16)
    • 2.388 mm(16)
    • 2.51 mm(16)
    • 2.511 mm(16)
    • 3.0 mm(16)
    • 3.125 mm(16)
    • 3.175 mm(16)
    • 3.177 mm(16)
    • 3.3 mm(16)
    • 3.301 mm(16)
    • 3.302 mm(16)
    • 4.0 mm(8)
    • 4.094 mm(16)
    • 4.125 mm(8)
    • 4.75 mm(8)
    • 4.76 mm(8)
    • 4.762 mm(8)
    • 4.763 mm(8)
    • 4.873 mm(8)
    • 4.877 mm(8)
    • 4.878 mm(8)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Size
    Insert Size
    • 1F (12)
    • 2 (16)
    • 3 (16)
    • 4 (8)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.197 in(8)
    • 0.276 in(24)
    • 0.394 in(12)
    • 0.472 in(8)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(8)
    • 7.0 mm(24)
    • 10.0 mm(12)
    • 12.0 mm(8)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(4)
    • 12.7 mm(4)
    • 15.87 mm(4)
    • 15.875 mm(2)
    • 16.0 mm(6)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 25.0 mm(6)
    • 25.4 mm(6)
    • 31.7 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(4)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)