Kenloc™ • M 스타일 클램핑 • 네거티브 스타일 인서트용
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (460)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(460)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(460)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(460)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(460)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(460)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(460)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(460)
- M Stainless Steel (460)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(460)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(460)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(460)
- K Cast Iron (460)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(460)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(460)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(458)
- N Non-Ferrous Materials (448)
- N1Wrought Aluminum (415)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (415)
- N3High-Silicon Aluminum Alloys Si >12.2%(183)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(415)
- N7MMC's (415)
- N6Carbon, Graphite Composites, CFRP (355)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (448)
- S High-Temp Alloys (460)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(460)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(460)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(460)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(460)
- H Hardened Materials (369)
- H3Hardened Materials 56-60 HRC(369)
- H2Hardened Materials 48-55 HRC(369)
- H4Hardened Materials >60 HRC(218)
- H1Hardened Materials 44-48 HRC(369)
Applications
Applications
Chamfer Turning (41)
Facing (295)
ID Facing (2)
Multiple Direction Cutting (296)
Plunge Turning (51)
Profiling (343)
TRN Boring (4)
Turning (450)
Cutting Condition Material
Cutting Condition Material
- H-All (369)
- K-All (454)
- K1 (105)
- M-All (424)
- N-All (321)
- P-All (458)
- S-All (407)
- S2 (343)
- S4 (119)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (457)
- Interrupted (336)
- Lightly Interrupted Cut (458)
- Smooth Cut (460)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (38)
- 50.0 (14)
- 60.0 (12)
- 62.5 (6)
- 63.0 (4)
- 72.5 (10)
- 75.0 (83)
- 90.0 (80)
- 91.0 (1)
- 93.0 (107)
- 95.0 (90)
- 107.5 (14)
- 117.5 (2)
받는 사람
Connection Style
Connection Style
- KM (20)
- Toolholder (437)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (207)
- 2.0 (262)
- 3.0 (100)
- 4.0 (318)
- 6.0 (117)
- 8.0 (234)
받는 사람
Over All Length [L]
Over All Length [L]
- 1.378 in(17)
- 1.5748 in(6)
- 1.575 in(1)
- 3.937 in(4)
- 4.0 in(10)
- 4.5 in(62)
- 4.921 in(15)
- 4.9213 in(3)
- 5.0 in(35)
- 5.5709 in(2)
- 5.9 in(1)
- 5.9055 in(8)
- 5.906 in(34)
- 6.0 in(183)
- 6.6929 in(14)
- 6.693 in(26)
- 6.7421 in(5)
- 6.7913 in(2)
- 7.0 in(24)
- 7.874 in(3)
- 8.0 in(5)
- 18.0 in(1)
받는 사람
Over All Length [L]
Over All Length [L]
- 35.0 mm(17)
- 40.0 mm(7)
- 100.0 mm(4)
- 101.6 mm(10)
- 114.295 mm(1)
- 114.3 mm(61)
- 125.0 mm(18)
- 127.0 mm(35)
- 141.5 mm(2)
- 150.0 mm(45)
- 152.4 mm(181)
- 170.0 mm(40)
- 171.25 mm(5)
- 172.5 mm(2)
- 177.8 mm(24)
- 200.0 mm(3)
- 203.2 mm(5)
- 457.2 mm(1)
받는 사람
Corner Radius
Corner Radius
- 0.004 in(171)
- 0.008 in(191)
- 0.014 in(17)
- 0.016 in(338)
- 0.024 in(12)
- 0.031 in(428)
- 0.047 in(423)
- 0.062 in(61)
- 0.063 in(352)
- 0.094 in(247)
- 0.125 in(36)
- 0.126 in(99)
- 0.157 in(22)
- 0.188 in(1)
- 0.25 in(14)
- 0.375 in(6)
- 0.5 in(2)
받는 사람
Corner Radius
Corner Radius
- 0.1 mm(171)
- 0.2 mm(191)
- 0.35 mm(17)
- 0.4 mm(338)
- 0.6 mm(12)
- 0.8 mm(428)
- 1.2 mm(423)
- 1.575 mm(61)
- 1.6 mm(352)
- 2.375 mm(62)
- 2.4 mm(223)
- 3.175 mm(36)
- 3.2 mm(99)
- 4.0 mm(22)
- 4.775 mm(1)
- 6.35 mm(14)
- 9.525 mm(6)
- 12.7 mm(2)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (307)
- 241 (61)
- CL4 (201)
- CM2 (291)
- CM3 (244)
- CM4 (158)
- CPX (295)
- CW2 (115)
- CW2015 (22)
- CW5025 (22)
- GX (183)
- HK1500 (15)
- HT2 (91)
- HTX (98)
- K060 (153)
- K090 (401)
- K1 (163)
- K10M (346)
- K10P (346)
- K10U (271)
- K15U (267)
- K20K (385)
- K21 (220)
- K25M (312)
- K25P (346)
- K313 (415)
- K35P (217)
- K420 (342)
- K45 (223)
- K68 (413)
- KB1340 (105)
- KB1345 (122)
- KB1610 (199)
- KB1625 (187)
- KB1630 (156)
- KB5610 (131)
- KB5625 (187)
- KB5630 (119)
- KB9610 (216)
- KB9640 (131)
- KBH10 (216)
- KBH10B (173)
- KBH20 (216)
- KBH20B (173)
- KBK35 (61)
- KC210 (224)
- KC250 (246)
- KC5010 (456)
- KC5025 (400)
- KC5410 (355)
- KC5510 (390)
- KC5525 (188)
- KC710 (75)
- KC720 (310)
- KC722 (61)
- KC725M (194)
- KC730 (395)
- KC7310 (398)
- KC732 (279)
- KC8050 (453)
- KC810 (419)
- KC850 (450)
- KC9010 (387)
- KC9025 (455)
- KC910 (412)
- KC9105 (353)
- KC9110 (460)
- KC9120 (437)
- KC9125 (458)
- KC9125RR (39)
- KC9140 (452)
- KC9145 (365)
- KC9210 (17)
- KC9215 (392)
- KC9225 (407)
- KC9240 (402)
- KC9240NEW (400)
- KC9245 (398)
- KC9315 (429)
- KC9320 (404)
- KC9325 (413)
- KC935 (449)
- KC950 (419)
- KC990 (456)
- KCD25 (24)
- KCK05 (406)
- KCK05B (349)
- KCK15 (399)
- KCK15B (407)
- KCK20 (404)
- KCK20B (401)
- KCM15 (393)
- KCM15B (371)
- KCM25 (400)
- KCM25B (387)
- KCM35 (372)
- KCM35B (268)
- KCP05 (308)
- KCP05B (241)
- KCP10 (458)
- KCP10B (443)
- KCP25 (458)
- KCP25B (442)
- KCP25C (387)
- KCP30 (452)
- KCP30B (347)
- KCP40 (360)
- KCP40B (375)
- KCPK05 (333)
- KCS10 (61)
- KCS10B (322)
- KCU10 (446)
- KCU25 (400)
- KD050 (223)
- KD081 (225)
- KD100 (134)
- KD120 (238)
- KD1400 (168)
- KD1405 (119)
- KD1425 (168)
- KM1 (187)
- KMF (61)
- KS15 (61)
- KT1120 (95)
- KT125 (240)
- KT150 (211)
- KT175 (255)
- KT315 (292)
- KT325 (128)
- KT5020 (71)
- KTP10 (24)
- KU10T (275)
- KU30T (429)
- KY1310 (210)
- KY1320 (330)
- KY1540 (185)
- KY1615 (357)
- KY2000 (224)
- KY2100 (116)
- KY3000 (359)
- KY3400 (316)
- KY3500 (354)
- KY4000 (155)
- KY4300 (147)
- KY4400 (328)
- KYHK15B (343)
- KYK10 (165)
- KYK25 (294)
- KYK35 (352)
- KYS25 (149)
- KYS30 (161)
- NL200 (78)
- NL250 (384)
- NL300 (296)
- NL400 (170)
- NL400S (24)
- NL920 (309)
- P25 (128)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (91)
- SP0819 (287)
- SP0A00 (1)
- SP3019 (302)
- SP4019 (273)
- SP4036 (34)
- SP4093 (34)
- SP61EJ (31)
- SPADAP (59)
- SPSREJ (16)
- THM (5)
- THM-X (9)
- THMF-X (5)
- TN10P (24)
- TN10U (24)
- TN15M (24)
- TN15U (24)
- TN2000 (15)
- TN20K (24)
- TN20P (24)
- TN30M (24)
- TN30P (18)
- TN4000 (15)
- TN5015 (18)
- TN5020 (15)
- TN5105 (18)
- TN5120 (18)
- TN6010 (17)
- TN6025 (13)
- TN7005 (13)
- TN7010 (18)
- TN7015 (18)
- TN7025 (18)
- TN7035 (50)
- TN7105 (12)
- TN7110 (18)
- TN7115 (18)
- TN7125 (15)
- TN7135 (15)
- TN8025 (18)
- TTI15 (8)
- TTM (2)
- TTM09 (5)
- TTR (5)
- TTS (11)
- TTX (12)
- WBH10C (20)
- WBH10P (11)
- WBH10U (16)
- WBH20P (22)
- WBH25P (14)
- WBH25U (20)
- WBH30P (11)
- WBK40U (3)
- WBK45U (13)
- WDN00U (5)
- WDN25U (15)
- WK05CT (24)
- WK15CT (13)
- WK20CT (24)
- WM15CT (24)
- WM25CT (24)
- WM35CT (24)
- WP05CT (4)
- WP15CT (24)
- WP25CT (24)
- WP35CT (24)
- WS10PT (24)
- WS25PT (24)
- WU10HT (24)
- WU10PT (19)
- WU25PT (19)
- X00511 (61)
- X00580 (61)
- X00581 (61)
- X00582 (61)
- X00583 (61)
- X00584 (61)
- X00585 (61)
- X00586 (61)
- X00591 (61)
- X00592 (61)
- X00593 (61)
- X00594 (61)
- X00596 (61)
- X00597 (61)
- X00599 (61)
Hand Of Tool
Hand Of Tool
- L (185)
- N (63)
- R (209)
Wiper Insert
Wiper Insert
- N (460)
- Y (240)
F Dimension
F Dimension
- 0.0 mm(3)
- 6.35 mm(2)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(1)
- 9.52 mm(1)
- 9.525 mm(5)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.25 mm(1)
- 12.5 mm(8)
- 12.7 mm(16)
- 13.76 mm(1)
- 13.764 mm(1)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(9)
- 15.88 mm(2)
- 16.0 mm(1)
- 16.82 mm(1)
- 17.0 mm(2)
- 19.05 mm(10)
- 19.075 mm(2)
- 19.685 mm(1)
- 19.688 mm(1)
- 20.0 mm(4)
- 20.5 mm(1)
- 21.031 mm(2)
- 22.0 mm(20)
- 22.22 mm(2)
- 22.225 mm(4)
- 22.352 mm(2)
- 23.165 mm(5)
- 25.0 mm(11)
- 25.197 mm(2)
- 25.4 mm(46)
- 25.5 mm(1)
- 26.416 mm(1)
- 27.0 mm(6)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.7 mm(2)
- 31.75 mm(83)
- 31.775 mm(6)
- 32.0 mm(51)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.006 mm(1)
- 38.1 mm(47)
- 38.125 mm(3)
- 38.379 mm(2)
- 40.0 mm(10)
- 40.5 mm(8)
- 44.958 mm(1)
- 46.25 mm(3)
- 50.0 mm(3)
- 50.8 mm(36)
- 50.826 mm(1)
- 57.15 mm(1)
- 57.658 mm(1)
- 63.5 mm(2)
받는 사람
F Dimension
F Dimension
- 0.0 in(3)
- 0.25 in(2)
- 0.312 in(1)
- 0.3125 in(1)
- 0.315 in(1)
- 0.375 in(6)
- 0.394 in(4)
- 0.472 in(3)
- 0.4724 in(1)
- 0.473 in(1)
- 0.4823 in(1)
- 0.492 in(7)
- 0.4921 in(1)
- 0.5 in(16)
- 0.542 in(2)
- 0.622 in(1)
- 0.625 in(12)
- 0.63 in(1)
- 0.662 in(1)
- 0.669 in(2)
- 0.75 in(10)
- 0.751 in(2)
- 0.775 in(2)
- 0.787 in(2)
- 0.7874 in(2)
- 0.807 in(1)
- 0.828 in(2)
- 0.866 in(10)
- 0.8661 in(10)
- 0.875 in(6)
- 0.88 in(2)
- 0.912 in(5)
- 0.984 in(9)
- 0.9843 in(2)
- 0.992 in(2)
- 1.0 in(46)
- 1.0039 in(1)
- 1.04 in(1)
- 1.063 in(6)
- 1.078 in(2)
- 1.103 in(2)
- 1.13 in(2)
- 1.25 in(83)
- 1.251 in(6)
- 1.2598 in(16)
- 1.26 in(33)
- 1.2698 in(1)
- 1.321 in(2)
- 1.353 in(2)
- 1.3782 in(1)
- 1.5 in(47)
- 1.501 in(3)
- 1.511 in(2)
- 1.5748 in(4)
- 1.575 in(6)
- 1.594 in(1)
- 1.5945 in(7)
- 1.77 in(1)
- 1.821 in(3)
- 1.9685 in(1)
- 1.969 in(1)
- 2.0 in(37)
- 2.001 in(1)
- 2.25 in(1)
- 2.27 in(1)
- 2.5 in(2)
- 126.0 in(1)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 44.0 mm(2)
- 54.0 mm(2)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.732 in(2)
- 2.126 in(2)
받는 사람
Cutting Direction
Cutting Direction
- B (90)
- E (71)
- S (296)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (385)
- NEGATIVE-ZERO (72)
Maximum Bore Depth
Maximum Bore Depth
- 1.378 in(4)
받는 사람
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(4)
받는 사람
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (134)
- D-DIAMOND/RHOMBIC 55 (63)
- R-ROUND (23)
- S-SQUARE 90 (75)
- T-TRIANGLE 60 (95)
- V-DIAMOND/RHOMBIC 35 (49)
- W-TRIGON 80 (22)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (283)
- B L (254)
- C A (413)
- C N (388)
- D P (200)
- H T (307)
- H W (460)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (437)
- TAPER SHANK (20)
System Size
System Size
- KM32 (12)
- KM32TS (6)
- KM40TS (2)
Back-End Diameter
Back-End Diameter
- 32.0 mm(22)
- 40.0 mm(2)
받는 사람
Shank Height
Shank Height
- 0.5 in(9)
- 0.625 in(10)
- 0.6299 in(2)
- 0.63 in(2)
- 0.75 in(54)
- 0.784 in(1)
- 0.787 in(15)
- 0.7874 in(2)
- 0.984 in(37)
- 0.9843 in(10)
- 1.0 in(112)
- 1.25 in(82)
- 1.2598 in(21)
- 1.26 in(26)
- 1.5 in(48)
- 1.5748 in(1)
- 1.575 in(2)
- 2.0 in(3)
받는 사람
Shank Height
Shank Height
- 12.7 mm(9)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(54)
- 20.0 mm(18)
- 25.0 mm(47)
- 25.4 mm(112)
- 31.75 mm(82)
- 32.0 mm(47)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
받는 사람
Shank Width
Shank Width
- 0.5 in(10)
- 0.625 in(10)
- 0.6299 in(2)
- 0.63 in(2)
- 0.75 in(55)
- 0.787 in(16)
- 0.7874 in(2)
- 0.984 in(51)
- 0.9843 in(18)
- 1.0 in(118)
- 1.25 in(74)
- 1.2598 in(12)
- 1.26 in(13)
- 1.5 in(48)
- 1.574 in(1)
- 1.5748 in(1)
- 1.575 in(1)
- 2.0 in(3)
받는 사람
Shank Width
Shank Width
- 12.7 mm(10)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(55)
- 20.0 mm(18)
- 25.0 mm(69)
- 25.4 mm(118)
- 31.75 mm(74)
- 32.0 mm(25)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
받는 사람
No filters matching ""
