KM63TS™
필터
필터
필터 보기 위치
MetricInch
Workpiece Material
Workpiece Material
- P Steel (31)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(31)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(31)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(31)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(31)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(31)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(31)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(31)
- M Stainless Steel (31)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(31)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(31)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(31)
- K Cast Iron (34)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(33)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(34)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(34)
- N Non-Ferrous Materials (31)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (31)
- N7MMC's (18)
- N3High-Silicon Aluminum Alloys Si >12.2%(14)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(26)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (26)
- N1Wrought Aluminum (26)
- N6Carbon, Graphite Composites, CFRP (24)
- S High-Temp Alloys (36)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(36)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(31)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(36)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(36)
- H Hardened Materials (30)
- H3Hardened Materials 56-60 HRC(22)
- H1Hardened Materials 44-48 HRC(30)
- H2Hardened Materials 48-55 HRC(30)
- H4Hardened Materials >60 HRC(21)
Applications
Applications
Facing (32)
Multiple Direction Cutting (19)
Profiling (3)
TRN Boring (14)
Turning (37)
Cutting Condition Material
Cutting Condition Material
- H-All (21)
- K-All (23)
- K1 (5)
- M-All (18)
- N-All (16)
- P-All (18)
- S-All (18)
- S2 (19)
- S4 (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (23)
- Interrupted (18)
- Lightly Interrupted Cut (23)
- Smooth Cut (25)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 75.0 (13)
- 90.0 (5)
- 93.0 (8)
- 95.0 (6)
- 107.5 (4)
받는 사람
Connection Style
Connection Style
- KM (23)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (10)
- 2.0 (16)
- 3.0 (5)
- 4.0 (19)
- 6.0 (7)
- 8.0 (17)
받는 사람
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.362 in(19)
- 2.3622 in(18)
받는 사람
Over All Length [L]
Over All Length [L]
- 60.0 mm(37)
받는 사람
Corner Radius
Corner Radius
- 0.004 in(8)
- 0.008 in(14)
- 0.014 in(4)
- 0.016 in(24)
- 0.024 in(2)
- 0.031 in(34)
- 0.047 in(34)
- 0.062 in(2)
- 0.063 in(34)
- 0.094 in(16)
- 0.125 in(1)
- 0.126 in(10)
- 0.157 in(2)
받는 사람
Corner Radius
Corner Radius
- 0.1 mm(8)
- 0.2 mm(14)
- 0.35 mm(4)
- 0.4 mm(24)
- 0.6 mm(2)
- 0.8 mm(34)
- 1.2 mm(34)
- 1.575 mm(2)
- 1.6 mm(34)
- 2.375 mm(5)
- 2.4 mm(13)
- 3.175 mm(1)
- 3.2 mm(10)
- 4.0 mm(2)
받는 사람
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (12)
- 241 (2)
- AC5 (3)
- CL4 (11)
- CM2 (14)
- CM3 (12)
- CM4 (7)
- CPX (14)
- CW2 (8)
- CW2015 (19)
- CW3020 (5)
- CW5025 (22)
- GX (6)
- HK1500 (12)
- HT2 (6)
- HTX (4)
- K00326 (8)
- K060 (12)
- K090 (24)
- K1 (5)
- K10M (16)
- K10P (14)
- K10U (12)
- K15U (12)
- K20K (18)
- K21 (10)
- K25M (14)
- K25P (16)
- K313 (26)
- K35P (14)
- K420 (15)
- K45 (6)
- K6 (3)
- K68 (29)
- K8735 (8)
- KB1340 (8)
- KB1345 (4)
- KB1610 (7)
- KB1625 (5)
- KB1630 (4)
- KB5610 (4)
- KB5625 (5)
- KB5630 (2)
- KB9610 (11)
- KB9640 (10)
- KBH10 (11)
- KBH10B (8)
- KBH20 (11)
- KBH20B (8)
- KBK35 (4)
- KBK45 (5)
- KC210 (10)
- KC250 (19)
- KC5010 (26)
- KC5025 (26)
- KC5410 (24)
- KC5510 (18)
- KC5525 (9)
- KC710 (2)
- KC720 (20)
- KC722 (2)
- KC725M (10)
- KC730 (20)
- KC7310 (26)
- KC732 (18)
- KC8050 (28)
- KC810 (31)
- KC850 (31)
- KC9010 (18)
- KC9025 (26)
- KC910 (31)
- KC9105 (24)
- KC9110 (26)
- KC9120 (29)
- KC9125 (26)
- KC9125RR (1)
- KC9140 (18)
- KC9145 (16)
- KC915M (3)
- KC920M (3)
- KC9210 (4)
- KC9215 (18)
- KC9225 (26)
- KC9240 (18)
- KC9240NEW (18)
- KC9245 (18)
- KC9315 (26)
- KC9320 (18)
- KC9325 (18)
- KC935 (26)
- KC950 (29)
- KC990 (23)
- KCD25 (8)
- KCK05 (26)
- KCK05B (16)
- KCK15 (21)
- KCK15B (26)
- KCK20 (18)
- KCK20B (18)
- KCM15 (18)
- KCM15B (24)
- KCM25 (26)
- KCM25B (18)
- KCM35 (18)
- KCM35B (17)
- KCP05 (22)
- KCP05B (11)
- KCP10 (26)
- KCP10B (26)
- KCP25 (26)
- KCP25B (26)
- KCP25C (18)
- KCP30 (18)
- KCP30B (18)
- KCP40 (18)
- KCP40B (18)
- KCPK05 (16)
- KCS10 (2)
- KCS10B (23)
- KCU10 (26)
- KCU25 (26)
- KD050 (14)
- KD081 (14)
- KD100 (13)
- KD120 (16)
- KD1400 (6)
- KD1405 (2)
- KD1425 (14)
- KM1 (8)
- KMF (2)
- KS15 (10)
- KT1120 (2)
- KT125 (18)
- KT150 (13)
- KT175 (10)
- KT315 (20)
- KT325 (8)
- KT5020 (2)
- KU10T (12)
- KU30T (18)
- KY1310 (18)
- KY1320 (23)
- KY1525 (5)
- KY1540 (14)
- KY1615 (20)
- KY2000 (15)
- KY2100 (8)
- KY2200 (3)
- KY3000 (23)
- KY3400 (21)
- KY3500 (26)
- KY4000 (8)
- KY4300 (9)
- KY4400 (21)
- KYHK15B (19)
- KYK10 (12)
- KYK25 (19)
- KYK35 (25)
- KYS25 (10)
- KYS30 (12)
- MC2 (3)
- NL200 (6)
- NL250 (18)
- NL300 (16)
- NL400 (8)
- NL920 (16)
- P25 (4)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (6)
- SP0819 (17)
- SP0A00 (4)
- SP3019 (16)
- SP4019 (10)
- SP61EJ (1)
- SPADAP (2)
- SPN4W2 (2)
- SPSREJ (2)
- THM (7)
- THM-X (7)
- THMF-X (5)
- TN10P (14)
- TN10U (12)
- TN15M (16)
- TN15U (12)
- TN2000 (14)
- TN20K (18)
- TN20P (18)
- TN30M (16)
- TN30P (18)
- TN4000 (14)
- TN5015 (18)
- TN5020 (16)
- TN5105 (12)
- TN5120 (16)
- TN6010 (6)
- TN6025 (11)
- TN7005 (8)
- TN7010 (21)
- TN7015 (21)
- TN7025 (18)
- TN7035 (18)
- TN7105 (10)
- TN7110 (17)
- TN7115 (16)
- TN7125 (18)
- TN7135 (18)
- TN8025 (16)
- TTI15 (6)
- TTM (1)
- TTM09 (6)
- TTR (4)
- TTR-X (2)
- TTS (11)
- TTX (9)
- W00342 (2)
- WBH10C (9)
- WBH10P (2)
- WBH10U (7)
- WBH20P (11)
- WBH25P (5)
- WBH25U (9)
- WBH30P (2)
- WBK40U (8)
- WBK45U (8)
- WDN00U (2)
- WDN25U (6)
- WK05CT (18)
- WK15CM (3)
- WK15CT (13)
- WK15PM (3)
- WK20CT (21)
- WK25YM (3)
- WM15CT (18)
- WM25CT (18)
- WM35CT (18)
- WP05CT (4)
- WP15CT (18)
- WP25CT (18)
- WP35CT (18)
- WS10PT (16)
- WS25PT (18)
- WU10HT (16)
- WU10PT (11)
- WU25PT (11)
- X00511 (2)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (11)
- N (1)
- R (11)
Wiper Insert
Wiper Insert
- N (37)
- Y (11)
F Dimension
F Dimension
- 0.0 mm(1)
- 27.0 mm(5)
- 38.0 mm(6)
- 43.0 mm(11)
받는 사람
F Dimension
F Dimension
- 0.0 in(1)
- 1.063 in(5)
- 1.4961 in(6)
- 1.6929 in(7)
- 1.693 in(4)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 80.0 mm(8)
- 86.0 mm(6)
받는 사람
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.15 in(8)
- 3.386 in(6)
받는 사람
Cutting Direction
Cutting Direction
- S (23)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (18)
- NEGATIVE-ZERO (1)
- NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(14)
받는 사람
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(14)
받는 사람
frontEnd
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (7)
- CARTRIDGE MOUNT (22)
- CUTOFF SUPPORT BLADE (4)
- ER COLLET CHUCK (7)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (8)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
Clamp Style
Clamp Style
- C (11)
- N (8)
- P (18)
Front End Type
Front End Type
- BKA - Boring Head Adapter (7)
- KMS - KM TBD System (1)
- KMT - KM Adapter (6)
- MCS - Modular Cartridge System (22)
- PMK - Prismatic Adapter Kenna (4)
- SZK - Collet Taper (7)
- ZYL - Cylindrical Adapter (10)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (7)
- D-DIAMOND/RHOMBIC 55 (4)
- S-SQUARE 90 (11)
- T-TRIANGLE 60 (5)
- V-DIAMOND/RHOMBIC 35 (8)
- W-TRIGON 80 (2)
Front End Style
Front End Style
- BKA01 Intchg Heads (H) Pilot (7)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (6)
- MCS01 Modular Deep Grooving (22)
- PMK02 Cutoff Sup Bld A1-A3 (4)
- SZK02 Collets 8 Degree Taper (7)
- ZYL01 Straight Shank (10)
Gage Length
Gage Length
- 2.1060 in(4)
- 2.3030 in(6)
- 2.3622 in(1)
- 2.5000 in(8)
- 2.5590 in(1)
- 2.5591 in(2)
- 2.6180 in(4)
- 3.0980 in(1)
- 3.1500 in(2)
- 4.4880 in(2)
- 4.7244 in(3)
- 5.2870 in(1)
- 5.2970 in(1)
- 5.2990 in(1)
- 6.2990 in(3)
- 6.6930 in(5)
- 8.1630 in(1)
- 9.2340 in(1)
- 11.1610 in(1)
- 12.2330 in(1)
- 13.1620 in(1)
- 14.1620 in(1)
- 14.2330 in(1)
- 15.1620 in(1)
- 15.2330 in(1)
- 16.2330 in(1)
- 19.1620 in(1)
- 20.2330 in(1)
Gage Length
Gage Length
- 53.5000 mm(4)
- 58.5000 mm(6)
- 60.0000 mm(1)
- 63.5000 mm(8)
- 65.0000 mm(3)
- 66.5000 mm(4)
- 78.6900 mm(1)
- 80.0000 mm(2)
- 114.0000 mm(2)
- 120.0000 mm(3)
- 134.2900 mm(1)
- 134.5500 mm(2)
- 160.0000 mm(3)
- 170.0000 mm(5)
- 207.3300 mm(1)
- 234.5500 mm(1)
- 283.5000 mm(1)
- 310.7100 mm(1)
- 334.3100 mm(1)
- 359.7300 mm(1)
- 361.5200 mm(1)
- 385.1100 mm(1)
- 386.9200 mm(1)
- 412.3200 mm(1)
- 486.7300 mm(1)
- 513.9200 mm(1)
Front End Size
Front End Size
- 6.0 in(1)
- 8.0 in(1)
- 10.0 in(1)
- 12.0 in(1)
- 14.0 in(1)
- 16.0 in(1)
- 18.0 in(1)
- 20.0 in(1)
- 31.75 in(1)
- 32.0 in(1)
- 38.1 in(1)
- 40.0 in(6)
- 44.45 in(1)
- 50.8 in(3)
- 63.5 in(2)
받는 사람
Front End Size
Front End Size
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
- 12.0 mm(1)
- 14.0 mm(1)
- 16.0 mm(1)
- 18.0 mm(1)
- 20.0 mm(1)
- 31.75 mm(1)
- 32.0 mm(1)
- 38.1 mm(1)
- 40.0 mm(6)
- 44.45 mm(1)
- 50.8 mm(3)
- 63.5 mm(2)
받는 사람
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (27)
- B L (20)
- C A (26)
- C N (29)
- D P (21)
- H T (20)
- H W (33)
backEnd
Connection Type
Connection Type
- TAPER SHANK (23)
System Size
System Size
- KM40TS (2)
- KM50TS (4)
- KM63TS (62)
- KM63XMZ (4)
- KM80ATC (4)
- KM80TS (4)
Back-End Diameter
Back-End Diameter
- 40.0 mm(2)
- 50.0 mm(4)
- 63.0 mm(80)
- 80.0 mm(8)
받는 사람
Back-End Diameter
Back-End Diameter
- 1.5748 in(2)
- 1.9685 in(2)
- 1.97 in(2)
- 2.478 in(10)
- 2.48 in(11)
- 2.4803 in(22)
- 3.15 in(8)
받는 사람
No filters matching ""
