환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

Top Notch™ Threading

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (693)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(693)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(693)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(693)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(693)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(693)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(693)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(693)
    • M Stainless Steel (693)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(693)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(693)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(693)
    • K Cast Iron (679)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(679)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(679)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(679)
    • N Non-Ferrous Materials (352)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(322)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(325)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (352)
      • N1
        Wrought Aluminum (352)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (325)
      • N6
        Carbon, Graphite Composites, CFRP (325)
      • N7
        MMC's (322)
    • S High-Temp Alloys (724)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(724)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(724)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(724)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(724)
    • H Hardened Materials (322)
      • H1
        Hardened Materials 44-48 HRC(322)
      • H4
        Hardened Materials >60 HRC(96)
      • H3
        Hardened Materials 56-60 HRC(96)
      • H2
        Hardened Materials 48-55 HRC(168)
    Applications
    Applications
    • Face GroovingFace Grooving (188)
    • GroovingGrooving (123)
    • ID GroovingID Grooving (70)
    • ID Thread TurningID Thread Turning (473)
    • OD Thread TurningOD Thread Turning (644)
    • ThreadingThreading (121)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (187)
    • K-All (187)
    • M-All (187)
    • N-All (187)
    • P-All (187)
    • S-All (187)
    Type of Thread
    Type of Thread
    • 60 (279)
    • ACME (187)
    • API (109)
    • API RD (77)
    • BSW (65)
    • BUTTRESS (198)
    • M (101)
    • NPT (72)
    • STUB ACME (98)
    • UN (324)
    • UNJ (158)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (187)
    • Lightly Interrupted Cut (187)
    • Smooth Cut (187)
    • Varying Depth of Cut (187)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (189)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (7)
    • Boring Bar Shank (63)
    • Toolholder (80)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (180)
    • 2.0 (717)
    • 4.0 (5)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.625 in(7)
    • 2.1654 in(1)
    • 2.1917 in(1)
    • 2.5 in(4)
    • 2.756 in(2)
    • 3.15 in(2)
    • 3.5 in(4)
    • 3.937 in(4)
    • 4.0 in(3)
    • 4.5 in(14)
    • 4.921 in(9)
    • 5.0 in(15)
    • 5.905 in(1)
    • 5.906 in(18)
    • 5.996 in(1)
    • 6.0 in(37)
    • 6.693 in(10)
    • 7.0 in(2)
    • 7.079 in(2)
    • 7.874 in(4)
    • 7.93 in(1)
    • 7.976 in(1)
    • 8.0 in(6)
    • 8.058 in(2)
    • 8.082 in(1)
    • 9.8425 in(2)
    • 10.0 in(9)
    • 11.811 in(4)
    • 12.0 in(6)
    • 13.7795 in(1)
    • 14.0 in(7)
    • 16.0 in(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 41.275 mm(7)
    • 55.0 mm(1)
    • 55.67 mm(1)
    • 63.5 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 88.9 mm(4)
    • 100.0 mm(4)
    • 101.6 mm(3)
    • 114.3 mm(14)
    • 125.0 mm(9)
    • 127.0 mm(15)
    • 150.0 mm(19)
    • 152.29 mm(1)
    • 152.4 mm(37)
    • 170.0 mm(10)
    • 177.8 mm(2)
    • 179.8 mm(2)
    • 200.0 mm(4)
    • 201.422 mm(1)
    • 202.591 mm(1)
    • 203.19 mm(1)
    • 203.2 mm(5)
    • 204.673 mm(2)
    • 205.283 mm(1)
    • 250.0 mm(2)
    • 254.0 mm(9)
    • 300.0 mm(4)
    • 304.8 mm(6)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.4 mm(8)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(61)
    • 0.003 in(250)
    • 0.004 in(186)
    • 0.005 in(83)
    • 0.006 in(120)
    • 0.007 in(236)
    • 0.008 in(192)
    • 0.009 in(73)
    • 0.01 in(169)
    • 0.011 in(69)
    • 0.012 in(63)
    • 0.013 in(120)
    • 0.014 in(114)
    • 0.016 in(73)
    • 0.017 in(66)
    • 0.018 in(101)
    • 0.019 in(31)
    • 0.02 in(142)
    • 0.023 in(103)
    • 0.03 in(72)
    • 0.031 in(132)
    • 0.032 in(11)
    • 0.035 in(100)
    • 0.039 in(132)
    • 0.047 in(132)
    • 0.049 in(132)
    • 0.059 in(132)
    • 0.062 in(60)
    • 0.063 in(168)
    • 0.069 in(132)
    • 0.078 in(60)
    • 0.079 in(96)
    • 0.089 in(96)
    • 0.094 in(96)
    • 0.098 in(36)
    • 0.125 in(36)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(61)
    • 0.075 mm(250)
    • 0.1 mm(186)
    • 0.125 mm(83)
    • 0.15 mm(120)
    • 0.175 mm(236)
    • 0.2 mm(192)
    • 0.225 mm(73)
    • 0.25 mm(169)
    • 0.275 mm(69)
    • 0.3 mm(63)
    • 0.325 mm(120)
    • 0.35 mm(114)
    • 0.4 mm(73)
    • 0.425 mm(66)
    • 0.45 mm(101)
    • 0.475 mm(31)
    • 0.5 mm(142)
    • 0.575 mm(103)
    • 0.75 mm(72)
    • 0.775 mm(132)
    • 0.825 mm(11)
    • 0.9 mm(100)
    • 1.0 mm(132)
    • 1.2 mm(132)
    • 1.25 mm(132)
    • 1.5 mm(132)
    • 1.575 mm(60)
    • 1.6 mm(168)
    • 1.75 mm(132)
    • 1.975 mm(60)
    • 2.0 mm(96)
    • 2.25 mm(96)
    • 2.4 mm(96)
    • 2.5 mm(36)
    • 3.175 mm(36)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(551)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(551)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1 (8)
    • K2885 (132)
    • K313 (175)
    • K420 (192)
    • K4H (95)
    • K68 (214)
    • KB1345 (96)
    • KB1630 (96)
    • KB5625 (60)
    • KBH20 (30)
    • KC250 (140)
    • KC5010 (290)
    • KC5025 (325)
    • KC5410 (169)
    • KC710 (168)
    • KC720 (178)
    • KC722 (168)
    • KC730 (262)
    • KC732 (60)
    • KC810 (187)
    • KC850 (224)
    • KC910 (95)
    • KC9110 (168)
    • KC9120 (60)
    • KC9320 (168)
    • KC935 (168)
    • KC950 (168)
    • KCK20 (131)
    • KCK20B (168)
    • KCP10B (168)
    • KCP25B (168)
    • KCU10 (258)
    • KCU25 (260)
    • KD050 (30)
    • KD081 (60)
    • KD100 (79)
    • KD120 (96)
    • KD1425 (60)
    • KT175 (132)
    • KT315 (168)
    • KU10T (168)
    • KU25T (168)
    • KU30T (168)
    • KY3000 (96)
    Hand Of Tool
    Hand Of Tool
    • L (59)
    • R (91)
    Wiper Insert
    Wiper Insert
    • N (736)
    F Dimension
    F Dimension
    • 6.55 mm(1)
    • 6.553 mm(2)
    • 6.73 mm(1)
    • 7.0 mm(2)
    • 8.26 mm(1)
    • 9.52 mm(2)
    • 10.0 mm(1)
    • 10.312 mm(1)
    • 10.785 mm(1)
    • 10.973 mm(4)
    • 11.0 mm(4)
    • 11.1 mm(2)
    • 12.0 mm(1)
    • 12.573 mm(3)
    • 12.7 mm(6)
    • 13.0 mm(2)
    • 14.0 mm(2)
    • 14.148 mm(3)
    • 14.27 mm(1)
    • 14.275 mm(3)
    • 15.875 mm(2)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 17.0 mm(4)
    • 17.348 mm(2)
    • 17.475 mm(2)
    • 17.48 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 22.0 mm(2)
    • 22.225 mm(4)
    • 25.0 mm(4)
    • 25.4 mm(9)
    • 27.0 mm(4)
    • 28.575 mm(2)
    • 31.75 mm(20)
    • 32.0 mm(9)
    • 34.925 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(14)
    • 40.0 mm(4)
    • 41.275 mm(4)
    • 50.8 mm(4)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(3)
    • 0.265 in(1)
    • 0.276 in(2)
    • 0.325 in(1)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.406 in(1)
    • 0.4281 in(1)
    • 0.432 in(4)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.472 in(1)
    • 0.495 in(3)
    • 0.5 in(6)
    • 0.512 in(2)
    • 0.551 in(2)
    • 0.557 in(3)
    • 0.562 in(4)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.669 in(4)
    • 0.683 in(2)
    • 0.688 in(4)
    • 0.75 in(2)
    • 0.787 in(2)
    • 0.8661 in(2)
    • 0.875 in(4)
    • 0.984 in(4)
    • 1.0 in(9)
    • 1.063 in(4)
    • 1.125 in(2)
    • 1.25 in(20)
    • 1.26 in(9)
    • 1.375 in(4)
    • 1.378 in(1)
    • 1.5 in(14)
    • 1.575 in(4)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension Min받는 사람F Dimension Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.4400 in(2)
    • 0.4402 in(1)
    • 0.4530 in(2)
    • 0.4800 in(1)
    • 0.6000 in(1)
    • 0.7280 in(2)
    • 0.7300 in(6)
    • 0.8000 in(1)
    • 0.8660 in(2)
    • 0.8661 in(1)
    • 1.0000 in(5)
    • 1.0240 in(2)
    • 1.1250 in(5)
    • 1.3390 in(4)
    • 1.3750 in(6)
    • 1.7323 in(2)
    • 1.7500 in(2)
    • 2.0000 in(2)
    • 2.1260 in(4)
    • 2.2500 in(1)
    • 2.5000 in(5)
    • 2.7500 in(4)
    • 2.7559 in(1)
    • 3.0000 in(4)
    • 3.2500 in(4)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 11.1760 mm(1)
    • 11.1800 mm(1)
    • 11.1810 mm(1)
    • 11.5000 mm(2)
    • 12.1900 mm(1)
    • 15.2400 mm(1)
    • 18.5000 mm(2)
    • 18.5420 mm(6)
    • 20.3200 mm(1)
    • 22.0000 mm(3)
    • 25.4000 mm(5)
    • 26.0000 mm(2)
    • 28.5750 mm(4)
    • 28.5800 mm(1)
    • 34.0000 mm(4)
    • 34.9200 mm(2)
    • 34.9250 mm(4)
    • 44.0000 mm(2)
    • 44.4500 mm(2)
    • 50.8000 mm(2)
    • 54.0000 mm(4)
    • 57.1500 mm(1)
    • 63.5000 mm(5)
    • 69.8500 mm(4)
    • 70.0000 mm(1)
    • 76.2000 mm(4)
    • 82.5500 mm(4)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(76)
    • 11.176 mm(1)
    • 11.18 mm(1)
    • 11.181 mm(1)
    • 11.5 mm(2)
    • 12.19 mm(1)
    • 15.24 mm(1)
    • 18.5 mm(2)
    • 18.542 mm(6)
    • 20.32 mm(1)
    • 22.0 mm(3)
    • 25.4 mm(5)
    • 26.0 mm(2)
    • 28.575 mm(4)
    • 28.58 mm(1)
    • 34.0 mm(4)
    • 34.92 mm(2)
    • 34.925 mm(4)
    • 38.1 mm(4)
    • 41.3 mm(27)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(27)
    • 50.0 mm(2)
    • 50.8 mm(2)
    • 54.0 mm(4)
    • 55.88 mm(3)
    • 56.625 mm(29)
    • 57.15 mm(1)
    • 57.2 mm(15)
    • 60.325 mm(2)
    • 63.5 mm(23)
    • 69.85 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 82.55 mm(4)
    • 88.9 mm(58)
    • 127.0 mm(1)
    • 139.7 mm(27)
    • 146.05 mm(3)
    • 174.6 mm(27)
    • 209.6 mm(17)
    • 222.3 mm(15)
    • 333.0 mm(3)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(76)
    • 0.44 in(2)
    • 0.4402 in(1)
    • 0.453 in(2)
    • 0.48 in(1)
    • 0.6 in(1)
    • 0.728 in(2)
    • 0.73 in(6)
    • 0.8 in(1)
    • 0.866 in(2)
    • 0.8661 in(1)
    • 1.0 in(5)
    • 1.024 in(2)
    • 1.125 in(5)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.5 in(4)
    • 1.626 in(27)
    • 1.7323 in(2)
    • 1.75 in(2)
    • 1.874 in(27)
    • 1.9685 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(29)
    • 2.25 in(1)
    • 2.252 in(15)
    • 2.375 in(2)
    • 2.5 in(23)
    • 2.75 in(4)
    • 2.7559 in(1)
    • 3.0 in(8)
    • 3.25 in(4)
    • 3.5 in(58)
    • 5.0 in(1)
    • 5.5 in(27)
    • 5.75 in(3)
    • 6.874 in(27)
    • 8.252 in(17)
    • 8.752 in(15)
    • 13.11 in(3)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(182)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(182)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 7.0 (12)
    • 14.5 (121)
    • 27.0 (8)
    • 27.5 (5)
    • 30.0 (377)
    • 33.0 (8)
    • 45.0 (18)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (80)
    • S (70)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (2)
    • NEUTRAL (ZERO) (148)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(10)
    • 1.231 in(1)
    • 1.235 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.55 in(1)
    • 1.85 in(1)
    • 1.88 in(2)
    • 2.0 in(26)
    • 2.5 in(5)
    • 2.52 in(2)
    • 3.0 in(4)
    • 3.125 in(1)
    • 3.16 in(2)
    • 3.75 in(3)
    • 3.7758 in(1)
    • 3.92 in(2)
    • 3.936 in(2)
    • 4.0 in(4)
    • 4.5 in(2)
    • 5.0 in(2)
    • 5.0392 in(2)
    • 6.0 in(4)
    • 6.2992 in(4)
    • 7.0 in(3)
    • 7.874 in(1)
    • 8.0 in(7)
    • 9.0 in(1)
    • 10.0 in(7)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.4 mm(10)
    • 31.26 mm(1)
    • 31.3 mm(1)
    • 32.8 mm(1)
    • 38.1 mm(1)
    • 39.5 mm(1)
    • 47.5 mm(1)
    • 48.0 mm(2)
    • 50.8 mm(26)
    • 63.48 mm(1)
    • 63.5 mm(4)
    • 64.0 mm(2)
    • 76.2 mm(4)
    • 79.375 mm(1)
    • 80.0 mm(2)
    • 95.25 mm(3)
    • 96.0 mm(1)
    • 100.0 mm(4)
    • 101.6 mm(4)
    • 114.3 mm(2)
    • 127.0 mm(2)
    • 128.0 mm(2)
    • 152.4 mm(4)
    • 160.0 mm(4)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.2 mm(7)
    • 228.6 mm(1)
    • 254.0 mm(7)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (9)
    • H (6)
    • S (55)
    frontEnd
    Clamp Style
    Clamp Style
    • N (188)
    Cutting Width
    Cutting Width
    • 0.0197 in(72)
    • 0.031 in(80)
    • 0.0315 in(72)
    • 0.035 in(72)
    • 0.039 in(72)
    • 0.0394 in(132)
    • 0.041 in(72)
    • 0.047 in(140)
    • 0.0472 in(132)
    • 0.055 in(72)
    • 0.0551 in(72)
    • 0.058 in(72)
    • 0.0591 in(132)
    • 0.062 in(140)
    • 0.0669 in(72)
    • 0.067 in(72)
    • 0.0689 in(132)
    • 0.072 in(60)
    • 0.076 in(72)
    • 0.0768 in(72)
    • 0.077 in(72)
    • 0.078 in(60)
    • 0.0787 in(132)
    • 0.079 in(102)
    • 0.0866 in(132)
    • 0.088 in(132)
    • 0.0886 in(102)
    • 0.094 in(140)
    • 0.097 in(60)
    • 0.0984 in(132)
    • 0.105 in(60)
    • 0.108 in(132)
    • 0.1083 in(132)
    • 0.11 in(60)
    • 0.118 in(132)
    • 0.1181 in(168)
    • 0.122 in(60)
    • 0.125 in(168)
    • 0.126 in(168)
    • 0.1278 in(72)
    • 0.128 in(132)
    • 0.129 in(72)
    • 0.131 in(30)
    • 0.1378 in(168)
    • 0.142 in(60)
    • 0.147 in(37)
    • 0.15 in(72)
    • 0.151 in(72)
    • 0.156 in(60)
    • 0.157 in(60)
    • 0.1574 in(96)
    • 0.1575 in(96)
    • 0.167 in(96)
    • 0.1673 in(60)
    • 0.169 in(60)
    • 0.1771 in(96)
    • 0.1772 in(96)
    • 0.178 in(60)
    • 0.185 in(77)
    • 0.188 in(96)
    • 0.189 in(96)
    • 0.192 in(30)
    • 0.193 in(30)
    • 0.195 in(60)
    • 0.1969 in(36)
    • 0.197 in(39)
    • 0.202 in(36)
    • 0.213 in(36)
    • 0.2165 in(36)
    • 0.2166 in(19)
    • 0.218 in(8)
    • 0.219 in(36)
    • 0.2362 in(39)
    • 0.25 in(47)
    • 0.255 in(36)
    • 0.276 in(3)
    • 0.281 in(11)
    • 0.312 in(11)
    • 0.315 in(2)
    • 0.344 in(3)
    • 0.354 in(3)
    • 0.375 in(11)
    • 0.38 in(3)
    • 0.383 in(8)
    • 1.93 in(30)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(72)
    • 0.787 mm(80)
    • 0.8 mm(72)
    • 0.889 mm(72)
    • 0.991 mm(72)
    • 1.0 mm(132)
    • 1.041 mm(72)
    • 1.19 mm(102)
    • 1.194 mm(140)
    • 1.199 mm(37)
    • 1.2 mm(132)
    • 1.39 mm(72)
    • 1.397 mm(72)
    • 1.4 mm(72)
    • 1.473 mm(72)
    • 1.5 mm(132)
    • 1.56 mm(37)
    • 1.57 mm(95)
    • 1.575 mm(140)
    • 1.69 mm(72)
    • 1.7 mm(72)
    • 1.702 mm(72)
    • 1.75 mm(132)
    • 1.829 mm(60)
    • 1.94 mm(72)
    • 1.95 mm(72)
    • 1.956 mm(72)
    • 1.981 mm(60)
    • 2.0 mm(132)
    • 2.007 mm(72)
    • 2.2 mm(132)
    • 2.235 mm(132)
    • 2.24 mm(102)
    • 2.25 mm(102)
    • 2.388 mm(140)
    • 2.39 mm(30)
    • 2.464 mm(60)
    • 2.5 mm(132)
    • 2.667 mm(60)
    • 2.74 mm(72)
    • 2.743 mm(132)
    • 2.75 mm(132)
    • 2.794 mm(60)
    • 2.997 mm(132)
    • 3.0 mm(168)
    • 3.099 mm(60)
    • 3.17 mm(60)
    • 3.175 mm(168)
    • 3.18 mm(54)
    • 3.2 mm(168)
    • 3.245 mm(72)
    • 3.25 mm(60)
    • 3.251 mm(132)
    • 3.27 mm(72)
    • 3.32 mm(30)
    • 3.329 mm(30)
    • 3.5 mm(168)
    • 3.607 mm(60)
    • 3.73 mm(37)
    • 3.81 mm(72)
    • 3.84 mm(72)
    • 3.96 mm(60)
    • 3.962 mm(60)
    • 3.974 mm(30)
    • 3.988 mm(60)
    • 4.0 mm(96)
    • 4.242 mm(96)
    • 4.25 mm(60)
    • 4.3 mm(60)
    • 4.5 mm(96)
    • 4.521 mm(60)
    • 4.6 mm(30)
    • 4.699 mm(77)
    • 4.775 mm(96)
    • 4.78 mm(17)
    • 4.785 mm(17)
    • 4.788 mm(19)
    • 4.8 mm(60)
    • 4.801 mm(96)
    • 4.81 mm(60)
    • 4.88 mm(30)
    • 4.9 mm(30)
    • 4.95 mm(60)
    • 5.0 mm(36)
    • 5.004 mm(39)
    • 5.131 mm(36)
    • 5.41 mm(36)
    • 5.5 mm(36)
    • 5.537 mm(8)
    • 5.563 mm(36)
    • 6.0 mm(39)
    • 6.35 mm(47)
    • 6.36 mm(19)
    • 6.48 mm(36)
    • 7.01 mm(3)
    • 7.137 mm(11)
    • 7.925 mm(11)
    • 8.001 mm(2)
    • 8.738 mm(3)
    • 8.992 mm(3)
    • 9.525 mm(11)
    • 9.65 mm(3)
    • 9.73 mm(8)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Size
    Insert Size
    • 1 (8)
    • 2 (45)
    • 3 (32)
    • 4 (16)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(39)
    • 0.1382 in(1)
    • 0.21 in(39)
    • 0.24 in(2)
    • 0.25 in(2)
    • 0.294 in(23)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.415 in(3)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.016 mm(1)
    • 1.6 mm(2)
    • 1.69 mm(1)
    • 1.78 mm(2)
    • 1.9 mm(1)
    • 3.3 mm(1)
    • 3.505 mm(21)
    • 3.51 mm(19)
    • 5.33 mm(16)
    • 5.334 mm(23)
    • 6.096 mm(2)
    • 6.35 mm(2)
    • 7.46 mm(8)
    • 7.468 mm(9)
    • 7.47 mm(6)
    • 7.62 mm(1)
    • 8.484 mm(4)
    • 10.54 mm(1)
    • 10.541 mm(2)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Thread TPI
    Thread TPI
    • 2.0 (7)
    • 2.5 (2)
    • 3.0 (4)
    • 4.0 (29)
    • 5.0 (22)
    • 6.0 (28)
    • 7.0 (1)
    • 8.0 (50)
    • 9.0 (1)
    • 10.0 (19)
    • 11.0 (5)
    • 11.5 (5)
    • 12.0 (35)
    • 13.0 (2)
    • 14.0 (12)
    • 16.0 (49)
    • 18.0 (13)
    • 20.0 (22)
    • 24.0 (18)
    • 27.0 (1)
    • 28.0 (9)
    • 32.0 (9)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 1.5 mm(3)
    • 2.0 mm(7)
    • 6.25 mm(3)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 1.5 in(3)
    • 2.0 in(7)
    • 6.25 in(3)
    Thread Pitch Min받는 사람Thread Pitch Max
    insertGeometry
    Shape
    Shape
    • TN-TOP NOTCH (549)
    Insert Seat Size
    Insert Seat Size
    • 1 (6)
    • 2 (78)
    • 3 (379)
    • 4 (65)
    • 4U (3)
    • 6 (14)
    • 8 (4)
    Cutting Tool Material
    Cutting Tool Material
    • B H (96)
    • B L (60)
    • C N (96)
    • D P (79)
    • H T (168)
    • H W (738)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (63)
    • BORING BAR HEAD (7)
    • SQUARE SHANK (80)
    Back-End Diameter
    Back-End Diameter
    • 7.9 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.7 mm(8)
    • 15.87 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(3)
    • 19.05 mm(5)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(6)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(4)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.8 mm(7)
    • 57.15 mm(1)
    • 63.5 mm(7)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.5 in(6)
    • 0.6067 in(1)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(9)
    • 0.787 in(4)
    • 0.9378 in(1)
    • 0.984 in(6)
    • 1.0 in(15)
    • 1.2134 in(2)
    • 1.25 in(10)
    • 1.26 in(7)
    • 1.5 in(4)
    • 1.5283 in(4)
    • 1.8488 in(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.7 mm(6)
    • 15.41 mm(1)
    • 15.875 mm(3)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 23.82 mm(1)
    • 25.0 mm(6)
    • 25.4 mm(15)
    • 30.82 mm(2)
    • 31.75 mm(10)
    • 32.0 mm(7)
    • 38.1 mm(4)
    • 38.82 mm(4)
    • 46.96 mm(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.5 in(6)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(9)
    • 0.787 in(4)
    • 0.8646 in(1)
    • 0.984 in(9)
    • 1.0 in(15)
    • 1.1402 in(2)
    • 1.25 in(10)
    • 1.26 in(4)
    • 1.4551 in(4)
    • 1.5 in(4)
    • 1.8488 in(1)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.7 mm(6)
    • 15.875 mm(3)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 19.05 mm(9)
    • 20.0 mm(4)
    • 21.96 mm(1)
    • 25.0 mm(9)
    • 25.4 mm(15)
    • 28.96 mm(2)
    • 31.75 mm(10)
    • 32.0 mm(4)
    • 36.96 mm(4)
    • 38.1 mm(4)
    • 46.96 mm(1)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    Top Notch™ Threading
    Inserts
    (549)

    Inserts

    Toolholders
    (117)

    Toolholders

    Boring Bars
    (63)

    Boring Bars

    Boring Heads
    (7)

    Boring Heads

    Cartridges
    (2)

    Cartridges

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk