환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

LT Threading

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (422)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(422)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(422)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(422)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(422)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(422)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(422)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(422)
    • M Stainless Steel (422)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(422)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(422)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(422)
    • K Cast Iron (422)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(422)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(422)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(422)
    • N Non-Ferrous Materials (58)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(58)
      • N6
        Carbon, Graphite Composites, CFRP (58)
      • N1
        Wrought Aluminum (58)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (58)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(58)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (58)
      • N7
        MMC's (58)
    • S High-Temp Alloys (422)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(422)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(422)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(422)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(422)
    • H Hardened Materials (58)
      • H1
        Hardened Materials 44-48 HRC(58)
    1차 선택 선택
    • DE (60)
    • GB (38)
    • SG (34)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (199)
    • OD Thread TurningOD Thread Turning (211)
    • ThreadingThreading (21)
    Type of Thread
    Type of Thread
    • 55 (72)
    • 60 (96)
    • ACME (56)
    • API (32)
    • API BUTTRESS (22)
    • API RD (37)
    • BSPT (47)
    • BSW (99)
    • M (154)
    • NPT (62)
    • NPTF (47)
    • RD DIN 405 (55)
    • STUB ACME (64)
    • TR DIN 103 (59)
    • UN (126)
    • UNJ (61)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (62)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (1)
    • Boring Bar Shank (40)
    • Toolholder (21)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.625 in(1)
    • 2.3622 in(1)
    • 3.937 in(2)
    • 3.94 in(2)
    • 5.0 in(5)
    • 5.9055 in(2)
    • 6.0 in(3)
    • 6.06 in(1)
    • 6.1 in(2)
    • 6.11 in(2)
    • 6.89 in(4)
    • 7.0 in(10)
    • 7.0866 in(10)
    • 7.087 in(1)
    • 7.874 in(4)
    • 9.8425 in(5)
    • 10.0 in(6)
    • 11.811 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 41.275 mm(1)
    • 60.0 mm(1)
    • 100.0 mm(4)
    • 127.0 mm(5)
    • 150.0 mm(2)
    • 152.0 mm(2)
    • 153.0 mm(1)
    • 154.0 mm(2)
    • 155.0 mm(3)
    • 175.0 mm(4)
    • 177.8 mm(8)
    • 178.0 mm(2)
    • 180.0 mm(11)
    • 200.0 mm(4)
    • 250.0 mm(5)
    • 254.0 mm(6)
    • 300.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(17)
    • 0.002 in(63)
    • 0.003 in(43)
    • 0.004 in(21)
    • 0.005 in(9)
    • 0.006 in(32)
    • 0.007 in(9)
    • 0.008 in(34)
    • 0.009 in(15)
    • 0.011 in(17)
    • 0.012 in(14)
    • 0.013 in(9)
    • 0.015 in(9)
    • 0.017 in(21)
    • 0.021 in(10)
    • 0.026 in(3)
    • 0.028 in(11)
    • 0.03 in(10)
    • 0.036 in(8)
    • 0.038 in(1)
    • 0.039 in(6)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(17)
    • 0.05 mm(63)
    • 0.075 mm(43)
    • 0.1 mm(21)
    • 0.125 mm(9)
    • 0.15 mm(32)
    • 0.175 mm(9)
    • 0.2 mm(34)
    • 0.225 mm(15)
    • 0.275 mm(17)
    • 0.3 mm(14)
    • 0.325 mm(9)
    • 0.375 mm(9)
    • 0.425 mm(21)
    • 0.525 mm(10)
    • 0.65 mm(3)
    • 0.7 mm(11)
    • 0.75 mm(10)
    • 0.925 mm(8)
    • 0.975 mm(1)
    • 1.0 mm(6)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(360)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(360)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00331 (19)
    • K68 (24)
    • KC5010 (100)
    • KC5025 (353)
    • KC710 (29)
    • KC720 (53)
    • KC722 (24)
    • KC730 (57)
    • KC9105 (1)
    • KU25T (24)
    • SP4066 (8)
    Hand Of Tool
    Hand Of Tool
    • L (27)
    • R (35)
    F Dimension
    F Dimension
    • 7.112 mm(2)
    • 7.3 mm(4)
    • 8.89 mm(2)
    • 8.9 mm(2)
    • 10.3 mm(1)
    • 11.3 mm(2)
    • 11.5 mm(1)
    • 11.684 mm(2)
    • 11.7 mm(1)
    • 12.954 mm(2)
    • 13.4 mm(2)
    • 15.6 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.51 mm(2)
    • 17.2 mm(2)
    • 17.4 mm(1)
    • 18.034 mm(2)
    • 19.05 mm(2)
    • 19.558 mm(1)
    • 20.0 mm(2)
    • 21.5 mm(2)
    • 21.59 mm(1)
    • 25.0 mm(4)
    • 25.4 mm(4)
    • 25.8 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 38.887 mm(1)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.28 in(2)
    • 0.2874 in(4)
    • 0.35 in(2)
    • 0.3504 in(2)
    • 0.4055 in(1)
    • 0.4449 in(2)
    • 0.4528 in(1)
    • 0.46 in(2)
    • 0.463 in(1)
    • 0.51 in(2)
    • 0.5276 in(2)
    • 0.6142 in(2)
    • 0.625 in(1)
    • 0.6299 in(2)
    • 0.6339 in(2)
    • 0.6417 in(2)
    • 0.65 in(2)
    • 0.6772 in(2)
    • 0.685 in(1)
    • 0.71 in(2)
    • 0.75 in(2)
    • 0.77 in(1)
    • 0.7874 in(2)
    • 0.8465 in(2)
    • 0.85 in(1)
    • 0.9843 in(4)
    • 1.0 in(4)
    • 1.0157 in(2)
    • 1.25 in(2)
    • 1.2598 in(4)
    • 1.531 in(1)
    F Dimension Min받는 사람F Dimension Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.5000 in(2)
    • 0.5118 in(4)
    • 0.6299 in(2)
    • 0.6500 in(2)
    • 0.6693 in(1)
    • 0.7870 in(1)
    • 0.7874 in(3)
    • 0.8000 in(2)
    • 0.9000 in(2)
    • 0.9449 in(2)
    • 1.0630 in(2)
    • 1.1417 in(4)
    • 1.2000 in(2)
    • 1.2500 in(2)
    • 1.2598 in(3)
    • 1.4500 in(1)
    • 1.5000 in(1)
    • 1.5354 in(2)
    • 1.8504 in(2)
    • 3.0300 in(1)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 12.7000 mm(2)
    • 13.0000 mm(4)
    • 16.0000 mm(2)
    • 16.5100 mm(2)
    • 17.0000 mm(1)
    • 20.0000 mm(4)
    • 20.3200 mm(2)
    • 22.8600 mm(2)
    • 24.0000 mm(2)
    • 27.0000 mm(2)
    • 29.0000 mm(4)
    • 30.4800 mm(2)
    • 31.7500 mm(2)
    • 32.0000 mm(3)
    • 36.8300 mm(1)
    • 38.1000 mm(1)
    • 39.0000 mm(2)
    • 47.0000 mm(2)
    • 76.9620 mm(1)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 12.7 mm(2)
    • 13.0 mm(4)
    • 16.0 mm(2)
    • 16.51 mm(2)
    • 17.0 mm(1)
    • 20.0 mm(4)
    • 20.32 mm(2)
    • 22.86 mm(2)
    • 24.0 mm(2)
    • 27.0 mm(2)
    • 29.0 mm(4)
    • 30.48 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 36.83 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 47.0 mm(2)
    • 76.962 mm(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.5 in(2)
    • 0.5118 in(4)
    • 0.6299 in(2)
    • 0.65 in(2)
    • 0.6693 in(1)
    • 0.787 in(1)
    • 0.7874 in(3)
    • 0.8 in(2)
    • 0.9 in(2)
    • 0.9449 in(2)
    • 1.063 in(2)
    • 1.1417 in(4)
    • 1.2 in(2)
    • 1.25 in(2)
    • 1.2598 in(3)
    • 1.45 in(1)
    • 1.5 in(1)
    • 1.5354 in(2)
    • 1.8504 in(2)
    • 3.03 in(1)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 10.0 (3)
    • 14.5 (18)
    • 15.0 (12)
    • 27.5 (53)
    • 30.0 (274)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (21)
    • S (41)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (41)
    • NEGATIVE-ZERO (21)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(2)
    • 1.2598 in(3)
    • 1.415 in(1)
    • 1.5 in(2)
    • 1.57 in(1)
    • 1.5748 in(3)
    • 2.3622 in(2)
    • 2.5 in(4)
    • 2.5196 in(2)
    • 3.0 in(1)
    • 3.1496 in(4)
    • 3.9372 in(4)
    • 5.0 in(2)
    • 5.0392 in(3)
    • 6.2992 in(2)
    • 10.0 in(1)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 35.94 mm(1)
    • 38.1 mm(2)
    • 39.878 mm(1)
    • 40.0 mm(3)
    • 60.0 mm(2)
    • 63.5 mm(4)
    • 64.0 mm(2)
    • 76.2 mm(1)
    • 80.0 mm(4)
    • 100.0 mm(4)
    • 127.0 mm(2)
    • 128.0 mm(3)
    • 160.0 mm(2)
    • 254.0 mm(1)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (41)
    frontEnd
    Clamp Style
    Clamp Style
    • C (12)
    • M (15)
    • S (14)
    • Y (21)
    Thread TPI
    Thread TPI
    • 4.0 (10)
    • 5.0 (7)
    • 6.0 (7)
    • 7.0 (8)
    • 8.0 (18)
    • 9.0 (1)
    • 10.0 (12)
    • 11.0 (10)
    • 11.5 (7)
    • 12.0 (17)
    • 14.0 (42)
    • 16.0 (20)
    • 18.0 (17)
    • 19.0 (5)
    • 20.0 (14)
    • 24.0 (10)
    • 27.0 (1)
    • 28.0 (9)
    • 32.0 (9)
    • 36.0 (1)
    • 40.0 (2)
    • 48.0 (29)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.35 mm(1)
    • 0.4 mm(1)
    • 0.5 mm(7)
    • 0.75 mm(7)
    • 0.8 mm(1)
    • 1.0 mm(13)
    • 1.25 mm(9)
    • 1.5 mm(30)
    • 1.75 mm(7)
    • 2.0 mm(12)
    • 2.5 mm(8)
    • 3.0 mm(32)
    • 3.5 mm(3)
    • 4.0 mm(4)
    • 4.5 mm(2)
    • 5.0 mm(10)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.35 in(1)
    • 0.4 in(1)
    • 0.5 in(7)
    • 0.75 in(7)
    • 0.8 in(1)
    • 1.0 in(13)
    • 1.25 in(9)
    • 1.5 in(30)
    • 1.75 in(7)
    • 2.0 in(12)
    • 2.5 in(8)
    • 3.0 in(32)
    • 3.5 in(3)
    • 4.0 in(4)
    • 4.5 in(2)
    • 5.0 in(10)
    Thread Pitch Min받는 사람Thread Pitch Max
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (360)
    Insert IC Size
    Insert IC Size
    • 4.0 mm(1)
    • 5.0 mm(7)
    • 6.35 mm(44)
    • 9.525 mm(265)
    • 12.7 mm(39)
    • 15.875 mm(4)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.1575 in(1)
    • 0.1696 in(1)
    • 0.1969 in(6)
    • 0.25 in(44)
    • 0.375 in(265)
    • 0.5 in(39)
    • 0.625 in(4)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 11 (1)
    • 16 (3)
    • 6 (1)
    • 8 (7)
    Cutting Edge Length
    Cutting Edge Length
    • 6.928 mm(1)
    • 8.66 mm(7)
    • 11.0 mm(1)
    • 16.498 mm(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2728 in(1)
    • 0.341 in(7)
    • 0.433 in(1)
    • 0.6495 in(3)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (40)
    • BORING BAR HEAD (1)
    • SQUARE SHANK (21)
    Back-End Diameter
    Back-End Diameter
    • 10.0 mm(2)
    • 16.0 mm(2)
    • 19.05 mm(8)
    • 20.0 mm(11)
    • 25.0 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(5)
    • 40.0 mm(2)
    • 63.5 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.5835 in(2)
    • 0.625 in(1)
    • 0.6299 in(2)
    • 0.7409 in(11)
    • 0.75 in(2)
    • 0.7874 in(2)
    • 0.9378 in(4)
    • 0.9843 in(4)
    • 1.0 in(4)
    • 1.2134 in(5)
    • 1.25 in(2)
    • 1.2598 in(4)
    • 1.5283 in(2)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 14.82 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 18.82 mm(11)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 23.82 mm(4)
    • 25.0 mm(4)
    • 25.4 mm(4)
    • 30.82 mm(5)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 38.82 mm(2)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.625 in(1)
    • 0.6299 in(2)
    • 0.75 in(2)
    • 0.7874 in(3)
    • 0.8646 in(4)
    • 0.9843 in(3)
    • 1.0 in(4)
    • 1.1402 in(5)
    • 1.25 in(2)
    • 1.2598 in(4)
    • 1.4551 in(2)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(3)
    • 21.96 mm(4)
    • 25.0 mm(3)
    • 25.4 mm(4)
    • 28.96 mm(5)
    • 31.75 mm(2)
    • 32.0 mm(4)
    • 36.96 mm(2)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    LT Threading
    Inserts
    (360)

    Inserts

    LT Threading Boring Bars
    (40)

    LT Threading Boring Bars

    LT Threading Toolholders
    (21)

    LT Threading Toolholders

    LT Threading Boring Heads
    (1)

    LT Threading Boring Heads

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk