환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

PCD End Mills

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (44)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(44)
      • N7
        MMC's (44)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (44)
      • N1
        Wrought Aluminum (44)
      • N6
        Carbon, Graphite Composites, CFRP (44)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(44)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
    Applications
    Applications
    • DrillingDrilling (18)
    • Face MillingFace Milling (44)
    • PocketPocket (18)
    • Pocket HelicalPocket Helical (18)
    • Pocket MillingPocket Milling (18)
    • Pocket Plunge MillingPocket Plunge Milling (18)
    • RampingRamping (18)
    • Shoulder MillingShoulder Milling (44)
    • Shoulder RoughingShoulder Roughing (44)
    • Shoulder Square EndShoulder Square End (44)
    • Slot MillingSlot Milling (44)
    • Slot Square EndSlot Square End (44)
    • Trochoidal MillingTrochoidal Milling (44)
    Cutting Diameter
    Cutting Diameter
    • 0.2362 in(2)
    • 0.25 in(2)
    • 0.3125 in(2)
    • 0.315 in(2)
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.4724 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.6299 in(3)
    • 0.75 in(3)
    • 0.7874 in(3)
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(2)
    • 1.2598 in(2)
    • 1.5 in(2)
    • 1.5748 in(2)
    • 1.9685 in(1)
    • 2.0 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.0 mm(2)
    • 6.35 mm(2)
    • 7.9375 mm(2)
    • 8.0 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(3)
    • 12.7 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(3)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(1)
    • 50.8 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.0 mm(1)
    • 6.35 mm(1)
    • 7.938 mm(1)
    • 8.0 mm(1)
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(1)
    • 12.7 mm(1)
    • 15.0 mm(6)
    • 15.875 mm(7)
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 24.0 mm(1)
    • 25.0 mm(1)
    • 25.4 mm(3)
    • 28.0 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 50.8 mm(1)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.2362 in(1)
    • 0.25 in(1)
    • 0.3125 in(1)
    • 0.315 in(1)
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.4724 in(1)
    • 0.5 in(1)
    • 0.5906 in(6)
    • 0.625 in(7)
    • 0.6299 in(1)
    • 0.75 in(2)
    • 0.7874 in(2)
    • 0.9449 in(1)
    • 0.9843 in(1)
    • 1.0 in(3)
    • 1.1024 in(1)
    • 1.25 in(2)
    • 1.2598 in(2)
    • 1.5 in(2)
    • 1.5748 in(3)
    • 2.0 in(1)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.748 in(4)
    • 0.9055 in(2)
    • 0.9843 in(2)
    • 1.3386 in(4)
    • 1.378 in(3)
    • 1.4173 in(3)
    • 1.4961 in(3)
    • 1.6535 in(1)
    • 1.6929 in(4)
    • 1.7717 in(6)
    • 2.1654 in(4)
    • 2.2047 in(3)
    • 2.2441 in(1)
    • 2.4803 in(1)
    • 2.6772 in(1)
    • 2.874 in(1)
    • 3.189 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 19.0 mm(4)
    • 23.0 mm(2)
    • 25.0 mm(2)
    • 34.0 mm(4)
    • 35.0 mm(3)
    • 36.0 mm(3)
    • 38.0 mm(3)
    • 42.0 mm(1)
    • 43.0 mm(4)
    • 45.0 mm(6)
    • 55.0 mm(4)
    • 56.0 mm(3)
    • 57.0 mm(1)
    • 63.0 mm(1)
    • 68.0 mm(1)
    • 73.0 mm(1)
    • 81.0 mm(1)
    Reach Min받는 사람Reach Max
    Number of Flutes
    Number of Flutes
    • 2 (34)
    • 3 (2)
    • 4 (6)
    • 5 (2)
    Over All Length [L]
    Over All Length [L]
    • 2.2441 in(2)
    • 2.25 in(2)
    • 2.4803 in(2)
    • 2.5 in(2)
    • 2.9921 in(2)
    • 3.0 in(2)
    • 3.25 in(3)
    • 3.2677 in(3)
    • 3.7402 in(3)
    • 3.75 in(3)
    • 3.937 in(4)
    • 4.0 in(4)
    • 4.25 in(4)
    • 4.252 in(3)
    • 4.5276 in(1)
    • 4.92 in(2)
    • 5.0 in(1)
    • 5.5 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 57.0 mm(2)
    • 57.15 mm(2)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.0 mm(2)
    • 76.2 mm(2)
    • 82.55 mm(3)
    • 83.0 mm(3)
    • 95.0 mm(3)
    • 95.25 mm(3)
    • 100.0 mm(4)
    • 101.6 mm(4)
    • 107.95 mm(4)
    • 108.0 mm(3)
    • 115.0 mm(1)
    • 125.0 mm(2)
    • 127.0 mm(1)
    • 139.7 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(6)
    • 0.01 in(6)
    • 0.012 in(9)
    • 0.015 in(16)
    • 0.016 in(7)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(6)
    • 0.25 mm(6)
    • 0.3 mm(9)
    • 0.375 mm(16)
    • 0.4 mm(7)
    Corner Radius Min받는 사람Corner Radius Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.2087 in(2)
    • 0.2284 in(2)
    • 0.2874 in(4)
    • 0.3386 in(2)
    • 0.3583 in(2)
    • 0.4331 in(3)
    • 0.4606 in(3)
    • 0.5787 in(3)
    • 0.5827 in(3)
    • 0.7165 in(3)
    • 0.752 in(3)
    • 0.9528 in(2)
    • 0.9685 in(2)
    • 1.2165 in(2)
    • 1.2244 in(2)
    • 1.248 in(3)
    • 1.2579 in(3)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 5.3 mm(2)
    • 5.8 mm(2)
    • 7.3 mm(4)
    • 8.6 mm(2)
    • 9.1 mm(2)
    • 11.0 mm(3)
    • 11.7 mm(3)
    • 14.7 mm(3)
    • 14.8 mm(3)
    • 18.2 mm(3)
    • 19.1 mm(3)
    • 24.2 mm(2)
    • 24.6 mm(2)
    • 30.9 mm(2)
    • 31.1 mm(2)
    • 31.7 mm(3)
    • 31.95 mm(3)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(2)
    • 6.35 mm(2)
    • 7.9375 mm(2)
    • 8.0 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(3)
    • 12.7 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(3)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.2362 in(2)
    • 0.25 in(2)
    • 0.3125 in(2)
    • 0.315 in(2)
    • 0.375 in(2)
    • 0.3937 in(2)
    • 0.4724 in(3)
    • 0.5 in(3)
    • 0.625 in(3)
    • 0.6299 in(3)
    • 0.75 in(3)
    • 0.7874 in(3)
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(5)
    • 1.2598 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    PCD End Mills
    KenCut™ AQ • ALCC • Radiused • 2 Flutes • 1.5 x D • Internal Coolant • Plain Shank • Inch
    (6)

    KenCut™ AQ • ALCC • Radiused • 2 Flutes • 1.5 x D • Internal Coolant • Plain Shank • Inch

    KenCut™ AQ • ALCB • Radiused • 2 Flutes • 1 x D • Internal Coolant • Plain Shank • Inch
    (6)

    KenCut™ AQ • ALCB • Radiused • 2 Flutes • 1 x D • Internal Coolant • Plain Shank • Inch

    KenCut™ AQ • ALSR • 반경형 • 2–3 플루트 • 1,25 x D • 헬리컬 • 내부 쿨런트 • 일반 섕크 • Metric
    (3)

    KenCut™ AQ • ALSR • 반경형 • 2–3 플루트 • 1,25 x D • 헬리컬 • 내부 쿨런트 • 일반 섕크 • Metric

    KenCut™ AQ • ALSB • 반경형 • 4–5 플루트 • 1,25 x D • 내부 쿨런트 • 일반 섕크 • Metric
    (4)

    KenCut™ AQ • ALSB • 반경형 • 4–5 플루트 • 1,25 x D • 내부 쿨런트 • 일반 섕크 • Metric

    KenCut™ AQ • ALCR • 반경형 • 2 플루트 • 2 x D • 내부 쿨런트 • 일반 섕크 • Metric
    (3)

    KenCut™ AQ • ALCR • 반경형 • 2 플루트 • 2 x D • 내부 쿨런트 • 일반 섕크 • Metric

    KenCut™ AQ • ALSB • Radiused • 4-5 Flutes • Internal Coolant • Plain Shank • Inch
    (4)

    KenCut™ AQ • ALSB • Radiused • 4-5 Flutes • Internal Coolant • Plain Shank • Inch

    KenCut<StartNumerator/>™ AQ • ALSR • Radiused • 2-3 Flutes • 1.25 x D • Internal Coolant • Plain Shank • Inch
    (3)

    KenCut™ AQ • ALSR • Radiused • 2-3 Flutes • 1.25 x D • Internal Coolant • Plain Shank • Inch

    KenCut™ AQ • ALCC • 반경형 • 2 플루트 • 1,5 x D • 내부 쿨런트 • 일반 섕크 • Metric
    (6)

    KenCut™ AQ • ALCC • 반경형 • 2 플루트 • 1,5 x D • 내부 쿨런트 • 일반 섕크 • Metric

    KenCut™ AQ • ALCR • Radiused • 2 Flutes • 2 x D • Internal Coolant • Plain Shank • Inch
    (3)

    KenCut™ AQ • ALCR • Radiused • 2 Flutes • 2 x D • Internal Coolant • Plain Shank • Inch

    KenCut™ AQ • ALCB • 반경형 • 2 플루트 • 1 x D • 내부 쿨런트 • 일반 섕크 • Metric
    (6)

    KenCut™ AQ • ALCB • 반경형 • 2 플루트 • 1 x D • 내부 쿨런트 • 일반 섕크 • Metric

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk