KSSM™ Slotting Cutters • IC 10

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (70)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(70)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(70)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(70)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(70)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(70)
    • M Stainless Steel (70)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(70)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(70)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(70)
    • K Cast Iron (65)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(65)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(65)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(65)
    • N Non-Ferrous Materials (49)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(49)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(49)
      • N1
        Wrought Aluminum (49)
    • S High-Temp Alloys (67)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(60)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(60)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(60)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(67)
    • H Hardened Materials (46)
      • H1
        Hardened Materials 44-48 HRC(46)
    Applications
    Applications
    • Face MillingFace Milling (3)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (17)
    • Shoulder MillingShoulder Milling (20)
    • Shoulder Square EndShoulder Square End (20)
    • Slot MillingSlot Milling (24)
    • Slot SideSlot Side (24)
    Cutting Diameter
    Cutting Diameter
    • 3.937 in(8)
    • 4.0 in(1)
    • 4.921 in(9)
    • 5.0 in(1)
    • 6.0 in(1)
    • 6.299 in(8)
    • 6.3 in(3)
    • 7.874 in(8)
    • 9.842 in(3)
    • 12.401 in(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 100.0 mm(8)
    • 101.6 mm(1)
    • 125.0 mm(9)
    • 127.0 mm(1)
    • 152.4 mm(1)
    • 160.0 mm(11)
    • 200.0 mm(8)
    • 250.0 mm(3)
    • 315.0 mm(2)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.11 mm(6)
    • 9.119 mm(14)
    • 14.0 mm(8)
    • 15.725 mm(3)
    • 15.82 mm(3)
    • 15.83 mm(1)
    • 16.0 mm(9)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.359 in(20)
    • 0.551 in(8)
    • 0.619 in(3)
    • 0.623 in(4)
    • 0.63 in(9)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 1.969 in(4)
    • 2.001 in(12)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 50.0 mm(4)
    • 50.83 mm(12)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (44)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (15)
    • 2 Key & Socket Head Cap Screw (13)
    • B-Cutter Retention Screw (14)
    • C-Bolt Circle (2)
    Number of Flutes
    Number of Flutes
    • 10 (7)
    • 11 (3)
    • 13 (2)
    • 14 (2)
    • 18 (1)
    • 3 (2)
    • 4 (4)
    • 5 (6)
    • 6 (8)
    • 7 (4)
    • 8 (3)
    • 9 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.969 in(4)
    • 2.001 in(12)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(4)
    • 50.83 mm(12)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(53)
    • 0.031 in(72)
    • 0.047 in(46)
    • 0.063 in(45)
    • 0.078 in(46)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(53)
    • 0.8 mm(72)
    • 1.2 mm(46)
    • 1.6 mm(45)
    • 1.975 mm(46)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (49)
    • KC520M (48)
    • KC725M (58)
    • KCK15 (51)
    • KCK20B (44)
    • KCPK30 (51)
    • KCPM20 (36)
    • KCPM40 (36)
    • KCSM30 (44)
    • KTPK20 (35)
    Hand Of Tool
    Hand Of Tool
    • L (10)
    • N (24)
    • R (10)
    Wiper Insert
    Wiper Insert
    • N (42)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.551 in(8)
    • 0.614 in(3)
    • 0.623 in(4)
    • 0.63 in(9)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 14.0 mm(8)
    • 15.596 mm(3)
    • 15.83 mm(4)
    • 16.0 mm(9)
    Cutting Width Min받는 사람Cutting Width Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.961 in(3)
    • 1.019 in(3)
    • 1.035 in(1)
    • 1.038 in(1)
    • 1.042 in(1)
    • 1.256 in(4)
    • 1.353 in(3)
    • 1.357 in(1)
    • 1.37 in(1)
    • 1.372 in(1)
    • 1.709 in(4)
    • 1.857 in(1)
    • 2.042 in(4)
    • 2.054 in(1)
    • 2.069 in(2)
    • 2.103 in(3)
    • 2.3 in(1)
    • 2.554 in(2)
    • 2.566 in(1)
    • 2.571 in(2)
    • 3.538 in(2)
    • 3.579 in(1)
    • 4.522 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 24.41 mm(3)
    • 25.87 mm(3)
    • 26.3 mm(1)
    • 26.36 mm(1)
    • 26.467 mm(1)
    • 31.91 mm(4)
    • 34.37 mm(3)
    • 34.468 mm(1)
    • 34.8 mm(1)
    • 34.86 mm(1)
    • 43.41 mm(4)
    • 47.168 mm(1)
    • 51.87 mm(4)
    • 52.17 mm(1)
    • 52.55 mm(2)
    • 53.41 mm(3)
    • 58.41 mm(1)
    • 64.87 mm(2)
    • 65.17 mm(1)
    • 65.3 mm(2)
    • 89.87 mm(2)
    • 90.91 mm(1)
    • 114.87 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (42)
    Insert IC Size
    Insert IC Size
    • 10.0 mm(42)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.394 in(42)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 10.0 mm(42)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.3937 in(9)
    • 0.394 in(33)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GB2 (26)
    • LD2 (11)
    • LE (5)
    Cutting Tool Material
    Cutting Tool Material
    • H T (1)
    • H W (41)
    Tolerance Class
    Tolerance Class
    • C (16)
    • E (20)
    • P (6)
    backEnd
    Connection Type
    Connection Type
    • ARBOR (28)
    • SHELL MILL (16)
    Back-End Diameter
    Back-End Diameter
    • 27.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(9)
    • 38.1 mm(2)
    • 40.0 mm(19)
    • 50.0 mm(7)
    • 60.0 mm(3)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.063 in(3)
    • 1.25 in(1)
    • 1.2598 in(9)
    • 1.5 in(2)
    • 1.5748 in(19)
    • 1.9685 in(7)
    • 2.3622 in(3)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)