환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

Romicron™

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (92)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(92)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(92)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(92)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(92)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(92)
    • M Stainless Steel (92)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(92)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(92)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(92)
    • K Cast Iron (92)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(92)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(92)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(92)
    • N Non-Ferrous Materials (92)
      • N6
        Carbon, Graphite Composites, CFRP (92)
      • N7
        MMC's (92)
      • N1
        Wrought Aluminum (92)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(92)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (92)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (92)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(92)
    • S High-Temp Alloys (92)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(92)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(92)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(92)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(92)
    • H Hardened Materials (90)
      • H3
        Hardened Materials 56-60 HRC(90)
      • H4
        Hardened Materials >60 HRC(90)
      • H1
        Hardened Materials 44-48 HRC(90)
      • H2
        Hardened Materials 48-55 HRC(90)
    Applications
    Applications
    • Blind Hole FinishingBlind Hole Finishing (55)
    • Multiple Direction CuttingMultiple Direction Cutting (12)
    • Through Hole FinishingThrough Hole Finishing (55)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (1)
    • K-All (50)
    • M-All (50)
    • N-All (48)
    • P-All (50)
    • S-All (50)
    • S4 (47)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (48)
    • Lightly Interrupted Cut (50)
    • Smooth Cut (50)
    • Varying Depth of Cut (50)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (49)
    • 95.0 (2)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Whistle Notch 2 Front (12)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (11)
    • 2.0 (11)
    • 4.0 (9)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.7539 in(3)
    • 0.756 in(3)
    • 0.7756 in(7)
    • 0.929 in(2)
    • 0.931 in(1)
    • 0.9311 in(2)
    • 0.935 in(1)
    • 0.9704 in(1)
    • 0.9705 in(2)
    • 1.047 in(2)
    • 1.053 in(1)
    • 1.162 in(1)
    • 1.2087 in(2)
    • 1.209 in(1)
    • 1.358 in(1)
    • 1.437 in(1)
    • 1.5236 in(2)
    • 1.524 in(1)
    • 1.634 in(1)
    • 2.0 in(1)
    • 2.1961 in(1)
    • 2.2717 in(1)
    • 2.3862 in(1)
    • 2.441 in(1)
    • 2.695 in(1)
    • 3.089 in(1)
    • 3.1496 in(1)
    • 3.168 in(1)
    • 3.561 in(1)
    • 3.5614 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 19.15 mm(3)
    • 19.2 mm(3)
    • 19.7 mm(7)
    • 23.6 mm(2)
    • 23.65 mm(3)
    • 23.75 mm(1)
    • 24.65 mm(3)
    • 26.6 mm(2)
    • 26.75 mm(1)
    • 29.5 mm(1)
    • 30.7 mm(3)
    • 34.5 mm(1)
    • 36.5 mm(1)
    • 38.7 mm(3)
    • 41.5 mm(1)
    • 50.8 mm(1)
    • 55.8 mm(1)
    • 57.7 mm(1)
    • 60.61 mm(1)
    • 62.0 mm(1)
    • 68.46 mm(1)
    • 78.46 mm(1)
    • 80.0 mm(1)
    • 80.31 mm(1)
    • 90.45 mm(1)
    • 90.46 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(2)
    • 0.004 in(90)
    • 0.007 in(2)
    • 0.008 in(90)
    • 0.015 in(2)
    • 0.016 in(90)
    • 0.031 in(90)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(2)
    • 0.1 mm(90)
    • 0.175 mm(2)
    • 0.2 mm(90)
    • 0.375 mm(2)
    • 0.4 mm(90)
    • 0.8 mm(90)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(39)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(39)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00379 (2)
    • K313 (92)
    • K420 (2)
    • K68 (90)
    • KB1345 (10)
    • KB1610 (90)
    • KB1630 (10)
    • KB5610 (90)
    • KB5625 (10)
    • KB5630 (10)
    • KB9610 (10)
    • KBH20 (10)
    • KC250 (90)
    • KC5010 (92)
    • KC5025 (92)
    • KC525M (89)
    • KC5410 (90)
    • KC710 (91)
    • KC720 (90)
    • KC725M (90)
    • KC730 (92)
    • KC7310 (89)
    • KC732 (90)
    • KC8050 (90)
    • KC810 (90)
    • KC850 (90)
    • KC9010 (90)
    • KC9025 (90)
    • KC910 (90)
    • KC9105 (90)
    • KC9110 (90)
    • KC9120 (90)
    • KC9125 (90)
    • KC9225 (90)
    • KC9240 (90)
    • KC9240NEW (90)
    • KC925M (89)
    • KC9315 (90)
    • KC9320 (90)
    • KC9325 (90)
    • KC935 (92)
    • KC950 (90)
    • KC990 (90)
    • KCD25 (90)
    • KCK05 (90)
    • KCK15 (90)
    • KCK15B (90)
    • KCK20 (90)
    • KCK20B (90)
    • KCM15 (90)
    • KCM15B (89)
    • KCM25 (90)
    • KCM25B (90)
    • KCP05 (90)
    • KCP10 (90)
    • KCP10B (90)
    • KCP25 (90)
    • KCP25B (90)
    • KCP30 (89)
    • KCPK05 (89)
    • KCPK30 (89)
    • KCS10 (90)
    • KCS10B (90)
    • KCU10 (92)
    • KCU25 (92)
    • KD050 (89)
    • KD081 (2)
    • KD100 (91)
    • KD105 (89)
    • KD120 (89)
    • KD1400 (92)
    • KD1405 (89)
    • KD1425 (92)
    • KT125 (90)
    • KT150 (90)
    • KT175 (90)
    • KT315 (92)
    • KTP10 (90)
    • KU10 (90)
    • KU10T (90)
    • KU30T (90)
    • SP4019 (89)
    • SPM5F2 (2)
    • SPMQMA (10)
    Hand Of Tool
    Hand Of Tool
    • R (12)
    Wiper Insert
    Wiper Insert
    • N (11)
    • Y (9)
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.1575 in(1)
    • 0.2362 in(2)
    • 0.3346 in(1)
    • 0.3350 in(1)
    • 0.4331 in(2)
    • 0.5315 in(2)
    • 0.6299 in(1)
    • 0.7480 in(1)
    • 0.8661 in(1)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 4.0000 mm(1)
    • 6.0000 mm(2)
    • 8.5000 mm(2)
    • 11.0000 mm(2)
    • 13.5000 mm(2)
    • 16.0000 mm(1)
    • 19.0000 mm(1)
    • 22.0000 mm(1)
    Minimum Bore Diameter Min받는 사람Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 4.0 mm(1)
    • 6.0 mm(2)
    • 8.5 mm(2)
    • 11.0 mm(2)
    • 13.5 mm(2)
    • 16.0 mm(1)
    • 19.0 mm(1)
    • 22.0 mm(1)
    • 25.0 mm(2)
    • 25.5 mm(1)
    • 29.5 mm(2)
    • 33.5 mm(1)
    • 34.0 mm(2)
    • 40.5 mm(1)
    • 42.0 mm(1)
    • 43.0 mm(1)
    • 45.5 mm(1)
    • 47.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(1)
    • 52.0 mm(1)
    • 56.5 mm(1)
    • 60.0 mm(2)
    • 61.0 mm(1)
    • 65.0 mm(1)
    • 97.0 mm(1)
    • 100.0 mm(1)
    • 103.5 mm(1)
    • 110.0 mm(1)
    • 138.0 mm(3)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.1575 in(1)
    • 0.2362 in(2)
    • 0.3346 in(1)
    • 0.335 in(1)
    • 0.4331 in(2)
    • 0.5315 in(2)
    • 0.6299 in(1)
    • 0.748 in(1)
    • 0.8661 in(1)
    • 0.9843 in(2)
    • 1.0039 in(1)
    • 1.1614 in(2)
    • 1.3189 in(1)
    • 1.3386 in(2)
    • 1.5945 in(1)
    • 1.6535 in(1)
    • 1.6929 in(1)
    • 1.791 in(1)
    • 1.8504 in(1)
    • 1.9291 in(1)
    • 1.9685 in(1)
    • 2.0472 in(1)
    • 2.2244 in(1)
    • 2.3622 in(2)
    • 2.4016 in(1)
    • 2.5591 in(1)
    • 3.82 in(1)
    • 3.937 in(1)
    • 4.0748 in(1)
    • 4.3307 in(1)
    • 5.43 in(1)
    • 5.4331 in(2)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.2756 in(1)
    • 0.3543 in(1)
    • 0.374 in(1)
    • 0.4528 in(1)
    • 0.4724 in(1)
    • 0.5512 in(1)
    • 0.5709 in(1)
    • 0.6496 in(1)
    • 0.6693 in(1)
    • 0.7677 in(1)
    • 0.8858 in(1)
    • 1.0039 in(1)
    • 1.3189 in(1)
    • 1.7126 in(1)
    • 2.5591 in(1)
    • 3.937 in(1)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 7.0 mm(1)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 11.5 mm(1)
    • 12.0 mm(1)
    • 14.0 mm(1)
    • 14.5 mm(1)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 19.5 mm(1)
    • 22.5 mm(1)
    • 25.5 mm(1)
    • 33.5 mm(1)
    • 43.5 mm(1)
    • 65.0 mm(1)
    • 100.0 mm(1)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (2)
    • E (10)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (11)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.562 in(1)
    • 0.803 in(1)
    • 0.853 in(1)
    • 1.042 in(1)
    • 1.201 in(1)
    • 1.279 in(1)
    • 1.416 in(1)
    • 1.516 in(1)
    • 1.573 in(1)
    • 2.1654 in(1)
    • 2.3622 in(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 14.27 mm(1)
    • 20.4 mm(1)
    • 21.7 mm(1)
    • 26.46 mm(1)
    • 30.5 mm(1)
    • 32.5 mm(1)
    • 35.96 mm(1)
    • 38.5 mm(1)
    • 39.96 mm(1)
    • 55.0 mm(1)
    • 60.0 mm(2)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (4)
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (47)
    • T-TRIANGLE 60 (1)
    Cartridge Size
    Cartridge Size
    • 1A. (1)
    • 1B. (1)
    • 1C. (1)
    • 1D. (1)
    • 1E. (1)
    • 1F. (1)
    • 1L. (1)
    • 1W (1)
    • 1X (1)
    • 1Y (1)
    • 2A. (1)
    • 2B. (1)
    • 2C. (1)
    • 2D. (1)
    • 2E. (1)
    • 2F. (1)
    • 2L. (3)
    • 2W (1)
    • 2X (1)
    • 2Y (1)
    • 3A. (1)
    • 3B. (1)
    • 3C. (1)
    • 3D. (1)
    • 3E. (1)
    • 3F. (2)
    • 3L. (1)
    • 3W (1)
    • 3X (1)
    • 3Y (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.1378 in(1)
    • 0.1772 in(1)
    • 0.187 in(1)
    • 0.2264 in(1)
    • 0.2362 in(1)
    • 0.2756 in(1)
    • 0.2855 in(1)
    • 0.3248 in(1)
    • 0.3347 in(1)
    • 0.3839 in(1)
    • 0.4429 in(1)
    • 0.502 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 3.5 mm(1)
    • 4.5 mm(1)
    • 4.75 mm(1)
    • 5.75 mm(1)
    • 6.0 mm(1)
    • 7.0 mm(1)
    • 7.25 mm(1)
    • 8.25 mm(1)
    • 8.5 mm(1)
    • 9.75 mm(1)
    • 11.25 mm(1)
    • 12.75 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 0.4921 in(1)
    • 0.8860 in(1)
    • 1.2800 in(1)
    • 1.6730 in(1)
    • 1.8268 in(1)
    • 1.9685 in(5)
    • 2.0354 in(1)
    • 2.3070 in(1)
    • 2.3600 in(1)
    • 2.9510 in(1)
    • 2.9530 in(2)
    • 3.1495 in(1)
    • 3.3465 in(1)
    • 3.3640 in(1)
    • 3.5430 in(1)
    • 3.7580 in(1)
    • 3.9370 in(7)
    • 4.3310 in(1)
    • 4.8980 in(1)
    • 5.9840 in(1)
    Gage Length
    Gage Length
    • 12.5000 mm(1)
    • 22.5000 mm(1)
    • 32.5000 mm(1)
    • 42.5000 mm(1)
    • 46.4000 mm(1)
    • 50.0000 mm(5)
    • 51.7000 mm(1)
    • 58.6000 mm(1)
    • 60.0000 mm(1)
    • 75.0000 mm(3)
    • 80.0000 mm(1)
    • 85.0000 mm(1)
    • 85.4000 mm(1)
    • 90.0000 mm(1)
    • 95.4500 mm(1)
    • 100.0000 mm(7)
    • 110.0000 mm(1)
    • 124.4000 mm(1)
    • 152.0000 mm(1)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (50)
    • B L (50)
    • D P (50)
    • H T (50)
    • H W (50)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (12)
    System Size
    System Size
    • HSK100A (5)
    • HSK63A (10)
    • KM40TS (4)
    • KM50 (2)
    • KM50TS (6)
    • KM63 (2)
    • KM63TS (1)
    • KM63XMZ (1)
    • KM80 (1)
    • KR32 (11)
    • KR50 (6)
    • KR63 (3)
    • KR80 (3)
    Back-End Diameter
    Back-End Diameter
    • 10.0 mm(5)
    • 16.0 mm(10)
    • 25.4 mm(1)
    • 31.75 mm(2)
    • 40.0 mm(4)
    • 50.0 mm(8)
    • 63.0 mm(14)
    • 80.0 mm(1)
    • 100.0 mm(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.2478 in(5)
    • 0.6299 in(3)
    • 1.0 in(1)
    • 1.25 in(2)
    • 1.573 in(4)
    • 1.967 in(5)
    • 1.9685 in(3)
    • 2.478 in(1)
    • 2.4803 in(8)
    • 3.1496 in(1)
    • 3.937 in(5)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    Romicron™
    Accessories
    (42)

    Accessories

    AVS
    (29)

    AVS

    SVS
    (25)

    SVS

    SVUBB • Boring Bar Heads
    (18)

    SVUBB • Boring Bar Heads

    SVU • Bridge Tools
    (18)

    SVU • Bridge Tools

    Modular Romicron
    (4)

    Modular Romicron

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk