유사한 제품:

이전 | 유사하게 수정된

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills

KMH 드릴 • 고경도 소재 • 외부 쿨런트

제품 번호100109386

B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
Open expanded view
B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
B941A (~3 x D) • KCH10 • A-Shank • KMH Drills
일반적인 표현
모든 가격 옵션을 알아보려면 당사 영업팀에 문의하세요.

특징 및 장점

  • The B94_ drill series without through coolant is specifically designed to machine hardened and surface hardened materials, using flood coolant. With its 145° point angle, it is also perfectly suited as pilot drill for the B95_ drill series with through coolant and 140° point for deeper applications.
  • KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.
  • Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B94_ series with 15° helix angle to maximize stability in applications above 54 HRC.
  • Grade KCH10 on B94_ series consists of a special fine grain carbide substrate with higher hardness. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.
  • 외부 쿨런트: 드릴링외부 쿨런트: 드릴링
  • 공구 치수: 2플루트/2마진/쿨런트 없음공구 치수: 2플루트/2마진/쿨런트 없음
  • 헬릭스각: 15°헬릭스각: 15°
  • DrillingDrilling
  • 섕크 — 원통형 일반 ≤h6섕크 — 원통형 일반 ≤h6
  • DIN 번호 6535DIN 번호 6535
  • DIN 번호 6537DIN 번호 6537
  • 드릴링 — 쿨런트 없음드릴링 — 쿨런트 없음
  • Drilling: Stacked PlatesDrilling: Stacked Plates
  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
Select the destination where you want to move 받는 사람.
신제품 Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급  

You are about to leave the Solution building process.

Are you sure you want to leave?

Standard

ALL

Material

Select a Value

Hardness

--

Hardness Scale

--

Permitted Groups :

Group

SubGroup

Hardness (HB)

Hardness (HRC)