A4™ Integral Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (201)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(201)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(201)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(201)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(201)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(201)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
- M Stainless Steel (201)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(201)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(201)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(201)
- K Cast Iron (201)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(201)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(201)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(201)
- N Non-Ferrous Materials (201)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(201)
- N6Carbon, Graphite Composites, CFRP (201)
- N7MMC's (90)
- N3High-Silicon Aluminum Alloys Si >12.2%(90)
- N1Wrought Aluminum (201)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (201)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (201)
- S High-Temp Alloys (201)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(201)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(201)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(201)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(201)
- H Hardened Materials (201)
- H2Hardened Materials 48-55 HRC(201)
- H3Hardened Materials 56-60 HRC(115)
- H4Hardened Materials >60 HRC(115)
- H1Hardened Materials 44-48 HRC(201)
Select First Choice
- BR (8)
- CN (53)
- DE (53)
- GB (26)
- IN (1)
- SG (13)
- US (91)
Applications
Applications
Chamfer Turning (52)
Cut-Off (63)
Deep Grooving (52)
Face Grooving (97)
Facing (52)
Grooving (169)
Multiple Direction Cutting (246)
Profiling (169)
Turning (169)
Cutting Condition Material
Cutting Condition Material
- H-All (201)
- K-All (201)
- M-All (201)
- N-All (201)
- P-All (201)
- S-All (201)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (201)
- Lightly Interrupted Cut (201)
- Smooth Cut (201)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (180)
- 92.25 (25)
to
Connection Style
Connection Style
- Boring Bar Shank (11)
- Toolholder (127)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (77)
- 2.0 (134)
to
Over All Length [L]
Over All Length [L]
- 2.077 in(23)
- 2.155 in(24)
- 2.2687 in(12)
- 2.352 in(8)
- 4.5 in(10)
- 4.9213 in(22)
- 4.9234 in(1)
- 4.9331 in(12)
- 4.934 in(1)
- 5.0 in(20)
- 5.9055 in(16)
- 5.9173 in(4)
- 5.918 in(2)
- 6.0 in(28)
- 6.6929 in(10)
- 7.0 in(1)
- 7.9311 in(7)
- 8.0118 in(4)
to
Over All Length [L]
Over All Length [L]
- 52.746 mm(11)
- 52.75 mm(12)
- 54.75 mm(24)
- 57.6129 mm(2)
- 57.6229 mm(10)
- 59.75 mm(8)
- 114.3 mm(10)
- 125.0 mm(24)
- 125.3 mm(12)
- 127.0 mm(20)
- 150.0 mm(18)
- 150.3 mm(4)
- 152.4 mm(28)
- 170.0 mm(10)
- 177.8 mm(1)
- 201.45 mm(7)
- 203.5 mm(4)
to
Corner Radius
Corner Radius
- 0.008 in(130)
- 0.016 in(149)
- 0.031 in(100)
- 0.033 in(29)
- 0.039 in(52)
- 0.041 in(35)
- 0.047 in(44)
- 0.048 in(13)
- 0.059 in(49)
- 0.06 in(37)
- 0.063 in(37)
- 0.079 in(31)
- 0.08 in(29)
- 0.094 in(29)
- 0.098 in(25)
- 0.099 in(24)
- 0.118 in(25)
- 0.119 in(25)
- 0.125 in(25)
- 0.156 in(13)
- 0.157 in(13)
- 0.158 in(13)
- 0.187 in(6)
- 0.188 in(6)
- 0.197 in(6)
- 0.198 in(6)
to
Corner Radius
Corner Radius
- 0.2 mm(130)
- 0.4 mm(149)
- 0.8 mm(100)
- 0.85 mm(29)
- 1.0 mm(52)
- 1.05 mm(35)
- 1.2 mm(44)
- 1.225 mm(13)
- 1.5 mm(49)
- 1.525 mm(37)
- 1.6 mm(37)
- 2.0 mm(31)
- 2.025 mm(29)
- 2.375 mm(29)
- 2.5 mm(25)
- 2.525 mm(24)
- 3.0 mm(25)
- 3.025 mm(25)
- 3.175 mm(25)
- 3.975 mm(13)
- 4.0 mm(13)
- 4.025 mm(13)
- 4.75 mm(6)
- 4.775 mm(6)
- 5.0 mm(6)
- 5.025 mm(6)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(67)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(67)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K1025 (67)
- K313 (169)
- KB1630 (115)
- KB5625 (115)
- KBH20 (115)
- KC5010 (169)
- KC5025 (169)
- KC9110 (169)
- KC9125 (169)
- KCK20 (134)
- KCP10 (169)
- KCP25 (169)
- KCU10 (201)
- KCU25 (201)
- KD1405 (90)
- KMS (61)
- KT315 (150)
- KU10 (169)
- KU30T (115)
- KY3500 (134)
- KYS30 (62)
- SP88F8 (25)
Hand Of Tool
Hand Of Tool
- L (80)
- N (9)
- R (101)
Wiper Insert
Wiper Insert
- N (134)
F Dimension
F Dimension
- 8.17 mm(1)
- 8.23 mm(2)
- 9.76 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 12.73 mm(3)
- 12.74 mm(2)
- 12.79 mm(2)
- 12.85 mm(2)
- 13.03 mm(2)
- 15.92 mm(1)
- 15.97 mm(4)
- 16.02 mm(1)
- 16.2 mm(3)
- 19.03 mm(1)
- 19.08 mm(3)
- 19.101 mm(1)
- 19.134 mm(6)
- 19.234 mm(3)
- 19.253 mm(2)
- 20.11 mm(14)
- 20.19 mm(7)
- 20.2 mm(13)
- 20.21 mm(2)
- 20.3 mm(2)
- 25.11 mm(8)
- 25.2 mm(6)
- 25.21 mm(4)
- 25.3 mm(2)
- 25.335 mm(2)
- 25.4 mm(1)
- 25.43 mm(2)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.578 mm(1)
- 25.584 mm(3)
- 25.71 mm(3)
- 27.9 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 33.1 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.9 mm(1)
- 39.1 mm(1)
to
F Dimension
F Dimension
- 0.3217 in(1)
- 0.324 in(2)
- 0.3843 in(1)
- 0.4028 in(1)
- 0.4031 in(1)
- 0.5012 in(3)
- 0.5016 in(2)
- 0.5035 in(2)
- 0.5059 in(2)
- 0.513 in(2)
- 0.6268 in(1)
- 0.6287 in(4)
- 0.6307 in(1)
- 0.637 in(1)
- 0.6378 in(2)
- 0.7492 in(1)
- 0.7512 in(3)
- 0.752 in(1)
- 0.7533 in(6)
- 0.7572 in(3)
- 0.758 in(2)
- 0.7917 in(14)
- 0.7949 in(7)
- 0.7953 in(13)
- 0.7957 in(2)
- 0.7992 in(2)
- 0.9886 in(8)
- 0.9921 in(6)
- 0.9925 in(4)
- 0.9961 in(2)
- 0.9974 in(2)
- 1.0 in(1)
- 1.0012 in(2)
- 1.0033 in(7)
- 1.0039 in(1)
- 1.007 in(1)
- 1.0072 in(3)
- 1.0122 in(3)
- 1.0984 in(1)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.3031 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5315 in(1)
- 1.5394 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 0.6693 in(3)
- 0.8268 in(3)
- 1.0236 in(5)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 17.0000 mm(3)
- 21.0000 mm(3)
- 26.0000 mm(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 17.0 mm(3)
- 19.99 mm(1)
- 20.0 mm(5)
- 21.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(9)
- 26.0 mm(5)
- 36.0 mm(3)
- 37.998 mm(1)
- 42.0 mm(4)
- 48.0 mm(2)
- 50.0 mm(2)
- 52.0 mm(2)
- 58.0 mm(2)
- 60.0 mm(2)
- 64.0 mm(2)
- 68.0 mm(2)
- 70.0 mm(5)
- 80.0 mm(4)
- 90.0 mm(6)
- 92.0 mm(2)
- 100.0 mm(2)
- 120.0 mm(8)
- 130.0 mm(2)
- 132.0 mm(2)
- 184.0 mm(2)
- 200.0 mm(4)
- 250.0 mm(3)
- 290.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(4)
- 0.6693 in(3)
- 0.787 in(1)
- 0.7874 in(5)
- 0.8268 in(3)
- 0.984 in(1)
- 0.9843 in(9)
- 1.0236 in(5)
- 1.4173 in(3)
- 1.496 in(1)
- 1.6535 in(4)
- 1.8898 in(2)
- 1.9685 in(2)
- 2.0472 in(2)
- 2.2835 in(2)
- 2.3622 in(2)
- 2.5197 in(2)
- 2.6772 in(2)
- 2.7559 in(5)
- 3.1496 in(4)
- 3.5433 in(6)
- 3.622 in(2)
- 3.937 in(2)
- 4.7244 in(8)
- 5.1181 in(2)
- 5.1969 in(2)
- 7.2441 in(2)
- 7.874 in(4)
- 9.8425 in(3)
- 11.4173 in(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(4)
- 0.8268 in(3)
- 0.9055 in(1)
- 0.984 in(1)
- 0.9843 in(5)
- 1.0236 in(2)
- 1.063 in(4)
- 1.102 in(4)
- 1.339 in(3)
- 1.378 in(2)
- 1.417 in(1)
- 1.4173 in(12)
- 1.811 in(1)
- 1.8898 in(2)
- 2.126 in(2)
- 2.2835 in(3)
- 2.5197 in(2)
- 2.8346 in(2)
- 2.9134 in(2)
- 3.3071 in(2)
- 3.7008 in(2)
- 3.937 in(4)
- 4.4094 in(2)
- 4.8819 in(2)
- 5.3543 in(2)
- 5.9055 in(2)
- 6.2992 in(2)
- 7.874 in(2)
- 8.3465 in(2)
- 10.0 in(2)
- 11.811 in(6)
- 39.3307 in(6)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 27.0 mm(4)
- 28.0 mm(4)
- 34.0 mm(3)
- 35.0 mm(2)
- 35.992 mm(1)
- 36.0 mm(12)
- 46.0 mm(1)
- 48.0 mm(2)
- 54.0 mm(2)
- 58.0 mm(2)
- 58.001 mm(1)
- 64.0 mm(2)
- 72.0 mm(2)
- 74.0 mm(2)
- 84.0 mm(2)
- 94.0 mm(2)
- 100.0 mm(4)
- 112.0 mm(2)
- 124.0 mm(2)
- 136.0 mm(2)
- 150.0 mm(2)
- 160.0 mm(2)
- 200.0 mm(2)
- 212.0 mm(2)
- 254.0 mm(2)
- 300.0 mm(6)
- 999.0 mm(6)
to
Cutting Direction
Cutting Direction
- E (181)
- S (9)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (27)
- POSITIVE-ZERO (124)
Maximum Bore Depth
Maximum Bore Depth
- 2.5 in(1)
- 2.5196 in(2)
- 3.0 in(1)
- 3.1496 in(2)
- 3.9372 in(3)
- 4.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 63.5 mm(1)
- 64.0 mm(2)
- 76.2 mm(1)
- 80.0 mm(2)
- 100.0 mm(3)
- 101.6 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (11)
Front-End
Clamp Style
Clamp Style
- Y (205)
Cutting Width
Cutting Width
- 0.078 in(35)
- 0.079 in(52)
- 0.0807 in(52)
- 0.084 in(35)
- 0.118 in(49)
- 0.119 in(37)
- 0.12 in(49)
- 0.125 in(37)
- 0.128 in(37)
- 0.157 in(31)
- 0.1575 in(29)
- 0.158 in(29)
- 0.159 in(31)
- 0.187 in(29)
- 0.1875 in(29)
- 0.19 in(29)
- 0.197 in(25)
- 0.198 in(24)
- 0.199 in(25)
- 0.236 in(25)
- 0.2382 in(25)
- 0.25 in(25)
- 0.253 in(25)
- 0.311 in(13)
- 0.312 in(13)
- 0.313 in(13)
- 0.315 in(13)
- 0.316 in(13)
- 0.3169 in(13)
- 0.375 in(6)
- 0.379 in(6)
- 0.394 in(6)
- 0.3957 in(6)
to
Cutting Width
Cutting Width
- 1.99 mm(35)
- 2.0 mm(52)
- 2.05 mm(52)
- 2.12 mm(35)
- 3.0 mm(49)
- 3.05 mm(49)
- 3.175 mm(37)
- 3.18 mm(37)
- 3.251 mm(37)
- 4.0 mm(31)
- 4.05 mm(31)
- 4.76 mm(29)
- 4.761 mm(29)
- 4.762 mm(29)
- 4.826 mm(29)
- 5.0 mm(25)
- 5.05 mm(25)
- 6.0 mm(25)
- 6.05 mm(25)
- 6.35 mm(25)
- 6.426 mm(25)
- 7.937 mm(13)
- 7.938 mm(13)
- 7.94 mm(13)
- 8.0 mm(13)
- 8.026 mm(13)
- 8.05 mm(13)
- 9.52 mm(6)
- 9.525 mm(6)
- 9.53 mm(6)
- 9.627 mm(6)
- 10.0 mm(6)
- 10.05 mm(6)
to
Insert Shape
Insert Shape
- PRISMATIC (205)
Cartridge Size
Cartridge Size
- 50 (55)
- 65 (12)
Insert Size
Insert Size
- 10 (4)
- 2 (19)
- 2S (11)
- 3 (20)
- 3S (8)
- 4 (19)
- 4S (1)
- 5 (16)
- 5S (1)
- 6 (19)
- 8 (9)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1969 in(3)
- 0.2756 in(2)
- 0.315 in(6)
- 0.3543 in(1)
- 0.3937 in(5)
- 0.4331 in(3)
- 0.4724 in(29)
- 0.5315 in(4)
- 0.55 in(1)
- 0.551 in(4)
- 0.5512 in(55)
- 0.5709 in(4)
- 0.6693 in(25)
- 0.689 in(3)
- 0.748 in(13)
- 0.7874 in(15)
- 0.8661 in(4)
- 0.9449 in(16)
- 1.0236 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(3)
- 7.0 mm(2)
- 8.0 mm(5)
- 8.001 mm(1)
- 9.0 mm(1)
- 10.0 mm(5)
- 11.0 mm(3)
- 12.0 mm(29)
- 13.5 mm(4)
- 13.995 mm(2)
- 14.0 mm(58)
- 14.5 mm(4)
- 17.0 mm(25)
- 17.5 mm(3)
- 18.999 mm(1)
- 19.0 mm(12)
- 20.0 mm(15)
- 22.0 mm(4)
- 24.0 mm(16)
- 25.999 mm(6)
- 26.0 mm(6)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 2.7559 in(3)
- 3.5433 in(2)
- 4.7244 in(4)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (115)
- B L (115)
- C N (134)
- D P (90)
- H T (150)
- H W (201)
Back-End
Connection Type
Connection Type
- BORING BAR (11)
- SQUARE SHANK (179)
Back-End Diameter
Back-End Diameter
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(2)
to
Shank Height
Shank Height
- 0.5 in(6)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(2)
- 0.63 in(1)
- 0.75 in(24)
- 0.7874 in(47)
- 0.9843 in(36)
- 1.0 in(33)
- 1.25 in(9)
- 1.2598 in(10)
- 1.5 in(1)
to
Shank Height
Shank Height
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(4)
- 19.05 mm(24)
- 20.0 mm(47)
- 25.0 mm(36)
- 25.4 mm(33)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(1)
to
Shank Width
Shank Width
- 0.5 in(6)
- 0.624 in(1)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(3)
- 0.743 in(1)
- 0.75 in(23)
- 0.7874 in(46)
- 0.9843 in(46)
- 1.0 in(33)
- 1.25 in(9)
- 1.5 in(1)
to
Shank Width
Shank Width
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(5)
- 18.86 mm(1)
- 19.05 mm(23)
- 20.0 mm(46)
- 25.0 mm(46)
- 25.4 mm(33)
- 31.75 mm(9)
- 38.1 mm(1)
to
No filters matching ""
