Kenclamp™ • D-スタイルクランプ • ネガスタイルインサート用
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (272)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(272)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(272)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(272)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(272)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(272)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(272)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(272)
- M Stainless Steel (272)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(272)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(272)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(272)
- K Cast Iron (272)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(272)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(272)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(272)
- N Non-Ferrous Materials (270)
- N1Wrought Aluminum (267)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(267)
- N3High-Silicon Aluminum Alloys Si >12.2%(132)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (270)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (267)
- N6Carbon, Graphite Composites, CFRP (243)
- N7MMC's (267)
- S High-Temp Alloys (272)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(272)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(272)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(272)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(272)
- H Hardened Materials (247)
- H1Hardened Materials 44-48 HRC(247)
- H2Hardened Materials 48-55 HRC(247)
- H3Hardened Materials 56-60 HRC(247)
- H4Hardened Materials >60 HRC(204)
第1選択を選択
- CN (51)
- DE (51)
- GB (17)
- SG (6)
- US (59)
Applications
Applications
Chamfer Turning (4)
Facing (151)
Multiple Direction Cutting (217)
Profiling (163)
TRN Boring (55)
Turning (222)
Cutting Condition Material
Cutting Condition Material
- H-All (247)
- K-All (271)
- K1 (95)
- M-All (268)
- N-All (215)
- P-All (272)
- S-All (267)
- S2 (246)
- S4 (110)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (272)
- Interrupted (222)
- Lightly Interrupted Cut (272)
- Smooth Cut (272)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (25)
- 62.5 (1)
- 63.0 (2)
- 72.5 (6)
- 75.0 (40)
- 90.0 (12)
- 93.0 (75)
- 95.0 (80)
- 107.5 (19)
- 117.5 (12)
to
Connection Style
Connection Style
- KM (47)
- Toolholder (169)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (138)
- 2.0 (189)
- 3.0 (32)
- 4.0 (228)
- 6.0 (41)
- 8.0 (148)
to
Over All Length [L]
Over All Length [L]
- 1.772 in(29)
- 1.969 in(28)
- 2.165 in(1)
- 2.362 in(36)
- 2.757 in(9)
- 4.5 in(10)
- 4.921 in(17)
- 5.0 in(23)
- 5.906 in(33)
- 6.0 in(65)
- 6.694 in(18)
- 6.732 in(1)
- 9.843 in(2)
to
Over All Length [L]
Over All Length [L]
- 45.0 mm(29)
- 50.0 mm(28)
- 55.0 mm(1)
- 60.0 mm(36)
- 70.0 mm(9)
- 114.301 mm(10)
- 125.0 mm(17)
- 127.0 mm(23)
- 150.0 mm(33)
- 152.4 mm(65)
- 170.0 mm(18)
- 171.0 mm(1)
- 250.0 mm(2)
to
Corner Radius
Corner Radius
- 0.004 in(180)
- 0.008 in(149)
- 0.014 in(32)
- 0.016 in(255)
- 0.024 in(18)
- 0.031 in(268)
- 0.047 in(268)
- 0.062 in(47)
- 0.063 in(216)
- 0.094 in(53)
- 0.095 in(84)
- 0.125 in(13)
- 0.126 in(36)
- 0.157 in(2)
- 0.25 in(3)
to
Corner Radius
Corner Radius
- 0.1 mm(180)
- 0.2 mm(149)
- 0.351 mm(32)
- 0.4 mm(255)
- 0.601 mm(18)
- 0.8 mm(268)
- 1.201 mm(268)
- 1.576 mm(47)
- 1.6 mm(216)
- 2.375 mm(53)
- 2.401 mm(84)
- 3.176 mm(13)
- 3.2 mm(36)
- 4.0 mm(2)
- 6.351 mm(3)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (222)
- 241 (47)
- CL4 (128)
- CM2 (215)
- CM3 (141)
- CM4 (105)
- CPX (193)
- CW2 (80)
- CW2015 (19)
- CW5025 (17)
- GX (108)
- HK1500 (15)
- HT2 (90)
- HTX (48)
- K060 (117)
- K090 (232)
- K1 (73)
- K10M (251)
- K10P (250)
- K10U (214)
- K15U (214)
- K20K (255)
- K21 (109)
- K25M (252)
- K25P (224)
- K313 (267)
- K35P (156)
- K420 (194)
- K45 (161)
- K68 (232)
- KB1340 (95)
- KB1345 (80)
- KB1610 (166)
- KB1625 (148)
- KB1630 (111)
- KB5610 (128)
- KB5625 (148)
- KB5630 (110)
- KB9610 (198)
- KB9640 (116)
- KBH10 (198)
- KBH10B (143)
- KBH20 (198)
- KBH20B (143)
- KBK35 (47)
- KC210 (172)
- KC250 (160)
- KC5010 (272)
- KC5025 (266)
- KC5410 (243)
- KC5510 (263)
- KC5525 (162)
- KC710 (50)
- KC720 (205)
- KC722 (47)
- KC725M (118)
- KC730 (235)
- KC7310 (267)
- KC732 (202)
- KC8050 (272)
- KC810 (261)
- KC850 (263)
- KC9010 (264)
- KC9025 (272)
- KC910 (250)
- KC9105 (261)
- KC9110 (272)
- KC9120 (263)
- KC9125 (272)
- KC9125RR (37)
- KC9140 (272)
- KC9145 (249)
- KC9210 (32)
- KC9215 (264)
- KC9225 (264)
- KC9240 (265)
- KC9240NEW (265)
- KC9245 (264)
- KC9315 (267)
- KC9320 (269)
- KC9325 (266)
- KC935 (271)
- KC950 (251)
- KC990 (272)
- KCD25 (32)
- KCK05 (267)
- KCK05B (253)
- KCK15 (266)
- KCK15B (267)
- KCK20 (266)
- KCK20B (266)
- KCM15 (264)
- KCM15B (262)
- KCM25 (265)
- KCM25B (264)
- KCM35 (252)
- KCM35B (176)
- KCP05 (251)
- KCP05B (219)
- KCP10 (272)
- KCP10B (272)
- KCP25 (272)
- KCP25B (271)
- KCP25C (264)
- KCP30 (272)
- KCP30B (222)
- KCP40 (216)
- KCP40B (226)
- KCPK05 (253)
- KCS10 (47)
- KCS10B (243)
- KCU10 (271)
- KCU25 (266)
- KD050 (161)
- KD081 (161)
- KD100 (113)
- KD120 (164)
- KD1400 (129)
- KD1405 (110)
- KD1425 (129)
- KM1 (100)
- KMF (47)
- KS15 (47)
- KT1120 (78)
- KT125 (193)
- KT150 (151)
- KT175 (196)
- KT315 (232)
- KT325 (91)
- KT5020 (32)
- KTP10 (32)
- KU10T (231)
- KU30T (270)
- KY1310 (156)
- KY1320 (241)
- KY1540 (138)
- KY1615 (229)
- KY2000 (147)
- KY2100 (116)
- KY3000 (226)
- KY3400 (183)
- KY3500 (243)
- KY4000 (135)
- KY4300 (108)
- KY4400 (243)
- KYHK15B (246)
- KYK10 (135)
- KYK25 (181)
- KYK35 (243)
- KYS25 (125)
- KYS30 (143)
- NL200 (79)
- NL250 (255)
- NL300 (163)
- NL400 (98)
- NL400S (32)
- NL920 (222)
- P25 (97)
- PB100 (2)
- PB170 (2)
- PB250 (2)
- PB300 (2)
- PS5 (90)
- SP0819 (175)
- SP0A00 (7)
- SP3019 (211)
- SP4019 (186)
- SP4036 (31)
- SP4093 (31)
- SP61EJ (37)
- SPADAP (12)
- SPSREJ (1)
- THM (9)
- THM-X (9)
- THMF-X (9)
- TN10P (21)
- TN10U (19)
- TN15M (21)
- TN15U (19)
- TN2000 (15)
- TN20K (21)
- TN20P (21)
- TN30M (21)
- TN30P (19)
- TN4000 (15)
- TN5015 (19)
- TN5020 (17)
- TN5105 (17)
- TN5120 (19)
- TN6010 (6)
- TN6025 (11)
- TN7005 (6)
- TN7010 (19)
- TN7015 (19)
- TN7025 (19)
- TN7035 (18)
- TN7105 (4)
- TN7110 (19)
- TN7115 (19)
- TN7125 (17)
- TN7135 (17)
- TN8025 (19)
- TTI15 (2)
- TTM (4)
- TTM09 (11)
- TTR (13)
- TTS (9)
- TTX (6)
- WBH10C (15)
- WBH10P (6)
- WBH10U (15)
- WBH20P (15)
- WBH25P (13)
- WBH25U (13)
- WBH30P (6)
- WBK40U (9)
- WBK45U (4)
- WDN00U (4)
- WDN25U (8)
- WK05CT (21)
- WK15CT (11)
- WK20CT (21)
- WM15CT (21)
- WM25CT (21)
- WM35CT (21)
- WP05CT (4)
- WP15CT (21)
- WP25CT (21)
- WP35CT (21)
- WS10PT (21)
- WS25PT (21)
- WU10HT (21)
- WU10PT (13)
- WU25PT (13)
- X00511 (47)
- X00580 (47)
- X00581 (47)
- X00582 (47)
- X00583 (47)
- X00584 (47)
- X00585 (47)
- X00586 (47)
- X00591 (47)
- X00592 (47)
- X00593 (47)
- X00594 (47)
- X00596 (47)
- X00597 (47)
- X00599 (47)
Hand Of Tool
Hand Of Tool
- L (89)
- N (19)
- R (108)
Wiper Insert
Wiper Insert
- N (272)
- Y (196)
F Dimension
F Dimension
- 0.0 mm(3)
- 9.425 mm(1)
- 9.525 mm(1)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.601 mm(3)
- 12.625 mm(1)
- 12.701 mm(1)
- 13.0 mm(1)
- 15.5 mm(1)
- 15.875 mm(2)
- 19.5 mm(1)
- 22.3 mm(1)
- 23.151 mm(2)
- 24.0 mm(4)
- 25.0 mm(13)
- 25.401 mm(12)
- 27.0 mm(15)
- 28.651 mm(2)
- 28.701 mm(1)
- 30.0 mm(4)
- 31.75 mm(49)
- 32.0 mm(37)
- 35.0 mm(8)
- 38.0 mm(4)
- 38.1 mm(15)
- 38.125 mm(1)
- 40.0 mm(8)
- 43.0 mm(10)
- 50.0 mm(1)
- 50.801 mm(5)
- 53.0 mm(3)
to
F Dimension
F Dimension
- 0.0 in(3)
- 0.371 in(1)
- 0.375 in(1)
- 0.394 in(3)
- 0.473 in(3)
- 0.496 in(3)
- 0.497 in(1)
- 0.5 in(1)
- 0.512 in(1)
- 0.61 in(1)
- 0.625 in(2)
- 0.768 in(1)
- 0.878 in(1)
- 0.911 in(2)
- 0.946 in(4)
- 0.984 in(13)
- 1.0 in(12)
- 1.063 in(15)
- 1.129 in(2)
- 1.131 in(1)
- 1.181 in(4)
- 1.25 in(49)
- 1.26 in(37)
- 1.379 in(8)
- 1.496 in(4)
- 1.5 in(15)
- 1.502 in(1)
- 1.575 in(8)
- 1.693 in(10)
- 1.969 in(1)
- 2.0 in(5)
- 2.087 in(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 54.0 mm(8)
- 70.0 mm(7)
- 80.0 mm(8)
- 86.0 mm(26)
- 106.0 mm(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.126 in(8)
- 2.757 in(7)
- 3.15 in(8)
- 3.386 in(26)
- 4.173 in(6)
to
Cutting Direction
Cutting Direction
- B (61)
- E (31)
- S (124)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (185)
- NEGATIVE-ZERO (31)
Maximum Bore Depth
Maximum Bore Depth
- 1.772 in(16)
- 1.969 in(14)
- 2.165 in(1)
- 2.362 in(18)
- 2.757 in(6)
to
Maximum Bore Depth
Maximum Bore Depth
- 45.0 mm(16)
- 50.0 mm(14)
- 55.0 mm(1)
- 60.0 mm(18)
- 70.0 mm(6)
to
frontEnd
Clamp Style
Clamp Style
- D (270)
- M (2)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (77)
- D-DIAMOND/RHOMBIC 55 (76)
- R-ROUND (3)
- S-SQUARE 90 (41)
- T-TRIANGLE 60 (14)
- V-DIAMOND/RHOMBIC 35 (34)
- W-TRIGON 80 (27)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (196)
- B L (211)
- C A (250)
- C N (247)
- D P (164)
- H T (235)
- H W (272)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (169)
- TAPER SHANK (47)
System Size
System Size
- KM40TS (17)
- KM50TS (12)
- KM63TS (14)
- KM63UT (1)
- KM80TS (3)
Back-End Diameter
Back-End Diameter
- 40.0 mm(33)
- 50.0 mm(29)
- 63.0 mm(32)
- 80.0 mm(9)
to
Back-End Diameter
Back-End Diameter
- 1.575 in(33)
- 1.969 in(29)
- 2.48 in(32)
- 3.15 in(9)
to
Shank Height
Shank Height
- 0.75 in(15)
- 0.787 in(18)
- 0.984 in(32)
- 1.0 in(53)
- 1.25 in(25)
- 1.26 in(19)
- 1.5 in(5)
- 1.575 in(2)
to
Shank Height
Shank Height
- 19.05 mm(15)
- 20.0 mm(18)
- 25.0 mm(32)
- 25.401 mm(53)
- 31.75 mm(25)
- 32.0 mm(19)
- 38.1 mm(5)
- 40.0 mm(2)
to
Shank Width
Shank Width
- 0.75 in(15)
- 0.787 in(18)
- 0.984 in(42)
- 1.0 in(58)
- 1.25 in(20)
- 1.26 in(9)
- 1.5 in(5)
- 1.575 in(2)
to
Shank Width
Shank Width
- 19.05 mm(15)
- 20.0 mm(18)
- 25.0 mm(42)
- 25.401 mm(58)
- 31.75 mm(20)
- 32.0 mm(9)
- 38.1 mm(5)
- 40.0 mm(2)
to
No filters matching ""
