Ceramic Mills
Because of their speed advantage over traditional carbide tools, ceramic milling tools have gained increasing popularity in recent years. Indexable ceramic inserts and other ceramic machining tools may also be easier to use, as they often work without the assistance of coolant. Whether your operation is looking to switch to ceramic tools or to replace existing ones, Kennametal offers one-stop shopping. Kennametal ceramic inserts give you precise and true cuts throughout the lifespan of each insert. If your operation requires high feed rates or fast machining, ceramic inserts, end mills or shell mills may be the way to go. Choose from standard inserts and tools or let our design engineers recommend made-for-application solutions.
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (56)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(56)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(56)
- Stainless Steel (33)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(33)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(33)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(33)
- Cast Iron (11)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(11)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(10)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(10)
- Non-Ferrous Materials (1)
- Wrought Aluminum (1)
- High-Temp Alloys (70)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(67)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(70)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(70)
- Hardened Materials (37)
- Hardened Materials 44-48 HRC(37)
- Hardened Materials 48-55 HRC(1)
- Hardened Materials 56-60 HRC(1)
Applications
(46)
(23)
(23)
(32)
(23)
(27)
(33)
(19)
(33)
Cutting Diameter
to
Cutting Diameter
- 0.375 (1)
- 0.3799 (1)
- 0.412 (1)
- 0.4134 (1)
- 0.5 (1)
- 0.537 (1)
- 0.5374 (1)
- 0.61 (1)
- 0.6102 (1)
- 0.625 (2)
- 0.75 (1)
- 0.761 (2)
- 0.766 (1)
- 0.77 (1)
- 1.0 (1)
- 1.009 (1)
- 1.0748 (2)
- 1.081 (1)
- 1.4685 (3)
- 1.473 (1)
- 1.5 (2)
- 1.501 (1)
- 1.505 (1)
- 1.9803 (3)
- 2.0 (3)
- 2.003 (1)
- 2.499 (1)
- 2.5 (2)
- 2.501 (1)
- 2.6496 (2)
- 2.652 (1)
- 3.437 (1)
- 3.498 (1)
- 4.4213 (1)
- 5.7992 (1)
to
Cutting Length
to
Cutting Condition Material
- (1)
Cutting Condition
- (1)
Tool Cutting Edge Angle
to
Connection Style
- (22)
- (5)
- (6)
- (14)
Number of Flutes
- (1)
- (4)
- (17)
- (9)
- (4)
- (6)
- (1)
- (2)
- (3)
Corner Radius
- (7)
- (11)
- (54)
to
Corner Radius
- (7)
- (11)
- (54)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
- (1)
- (12)
- (26)
- (22)
- (10)
- (13)
- (1)
- (23)
- (10)
- (10)
- (12)
- (56)
- (23)
- (42)
Hand Of Tool
- (47)
Wiper Insert
- (25)
Drilling Condition Material
- (1)
Front-End
Insert Geometry
Back-End
Connection Type
- (14)
- (6)
- (27)
