Full Radius Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
- Steel (119)
- Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(119)
- Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(119)
- Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(119)
- Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(119)
- Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(119)
- Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(119)
- High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(119)
- Stainless Steel (71)
- Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(71)
- High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(71)
- Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(71)
- Cast Iron (119)
- Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(119)
- Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(119)
- High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(119)
- Non-Ferrous Materials (80)
- Wrought Aluminum (80)
- Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(71)
- Copper, Brass, Zinc-based on machinability index range of 70-100 (80)
- Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (71)
- Carbon, Graphite Composites, CFRP (71)
- High-Temp Alloys (80)
- Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(80)
- Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(80)
- Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(80)
- Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(80)
- Hardened Materials (34)
- Hardened Materials 44-48 HRC(34)
- Hardened Materials 48-55 HRC(34)
Select First Choice
- (21)
- (21)
- (12)
- (3)
- (13)
- (21)
Applications
(128)
(128)
(128)
(128)
(128)
(128)
(128)
(126)
(128)
(128)
Cutting Condition Material
- (34)
- (128)
- (80)
- (89)
- (128)
- (89)
Cutting Condition
- (47)
- (93)
- (128)
Cutting Edges Per Insert
to
Application
Grade Of Cutting Tool
- (9)
- (9)
- (17)
- (22)
- (34)
- (37)
Wiper Insert
- (128)
Drilling Condition Material
- (34)
- (128)
- (80)
- (89)
- (128)
- (89)
Countersunk Angle
to
Front-End
Insert Shape
- (128)
Insert Geometry
Shape
- (128)
Insert Seat Size
- (14)
- (26)
- (26)
- (12)
- (26)
- (24)
Cutting Edge Length
to
Cutting Tool Material
- (128)
