Top Notch™ Profildrehen
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (245)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(245)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(245)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(245)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(245)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(245)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(245)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(245)
- M Stainless Steel (214)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(214)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(214)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(214)
- K Cast Iron (221)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(221)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(221)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(221)
- N Non-Ferrous Materials (254)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(207)
- N3High-Silicon Aluminum Alloys Si >12.2%(101)
- N1Wrought Aluminum (240)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (254)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (221)
- N6Carbon, Graphite Composites, CFRP (207)
- S High-Temp Alloys (236)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(236)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(236)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(236)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(236)
- H Hardened Materials (163)
- H1Hardened Materials 44-48 HRC(163)
- H2Hardened Materials 48-55 HRC(134)
Applications
Applications
Face Grooving (63)
Facing (6)
ID Facing (6)
ID Thread Turning (7)
Multiple Direction Cutting (100)
Profiling (6)
TRN Boring (6)
Turning (6)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (2)
- 72.5 (2)
- 93.0 (1)
- 95.0 (77)
- 100.0 (1)
- 107.5 (9)
- 117.5 (8)
to
Connection Style
Connection Style
- Bolt-On Head (2)
- Boring Bar Shank (42)
- Toolholder (56)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (360)
to
Over All Length [L]
Over All Length [L]
- 0.75 in(2)
- 3.149 in(1)
- 3.5 in(2)
- 3.937 in(2)
- 4.0 in(2)
- 4.5 in(10)
- 4.921 in(7)
- 4.9213 in(3)
- 5.0 in(4)
- 5.905 in(1)
- 5.9055 in(5)
- 5.906 in(9)
- 6.0 in(12)
- 6.6929 in(2)
- 7.087 in(2)
- 7.2618 in(2)
- 7.874 in(2)
- 8.0 in(2)
- 8.0548 in(1)
- 8.132 in(2)
- 8.15 in(1)
- 9.8425 in(3)
- 9.843 in(1)
- 10.0 in(7)
- 10.062 in(1)
- 10.0625 in(1)
- 10.094 in(2)
- 11.811 in(2)
- 12.0 in(5)
- 13.78 in(1)
- 14.0 in(2)
- 14.07 in(1)
to
Over All Length [L]
Over All Length [L]
- 19.05 mm(2)
- 80.0 mm(1)
- 88.9 mm(2)
- 100.0 mm(2)
- 101.6 mm(2)
- 114.3 mm(10)
- 125.0 mm(10)
- 127.0 mm(4)
- 150.0 mm(15)
- 152.4 mm(12)
- 170.0 mm(2)
- 180.0 mm(2)
- 184.45 mm(2)
- 200.0 mm(2)
- 203.2 mm(2)
- 204.591 mm(1)
- 206.553 mm(2)
- 207.01 mm(1)
- 250.0 mm(4)
- 254.0 mm(7)
- 255.588 mm(1)
- 255.59 mm(1)
- 256.389 mm(2)
- 300.0 mm(2)
- 304.8 mm(5)
- 350.0 mm(1)
- 355.6 mm(2)
- 357.38 mm(1)
to
Corner Radius
Corner Radius
- 0.005 in(76)
- 0.008 in(122)
- 0.016 in(194)
- 0.02 in(80)
- 0.031 in(180)
- 0.039 in(66)
- 0.047 in(43)
- 0.063 in(32)
to
Corner Radius
Corner Radius
- 0.125 mm(76)
- 0.2 mm(122)
- 0.4 mm(194)
- 0.5 mm(80)
- 0.8 mm(180)
- 1.0 mm(66)
- 1.2 mm(43)
- 1.6 mm(32)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(260)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(260)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K00326 (29)
- K313 (105)
- K420 (60)
- K6 (4)
- K68 (116)
- K8735 (29)
- KB1345 (25)
- KC250 (82)
- KC5010 (129)
- KC5025 (113)
- KC5410 (91)
- KC720 (29)
- KC730 (113)
- KC7310 (87)
- KC732 (94)
- KC8050 (100)
- KC810 (100)
- KC850 (119)
- KC9025 (94)
- KC910 (89)
- KC9105 (62)
- KC9110 (100)
- KC9120 (34)
- KC9125 (101)
- KC9225 (100)
- KC9315 (89)
- KC935 (94)
- KC950 (94)
- KCD25 (29)
- KCK05 (37)
- KCK15B (31)
- KCM15B (59)
- KCM25 (100)
- KCM25B (5)
- KCP05 (93)
- KCP10 (106)
- KCP10B (64)
- KCP25 (106)
- KCP25B (68)
- KCS10B (33)
- KCU10 (134)
- KCU25 (127)
- KD050 (82)
- KD081 (29)
- KD100 (94)
- KD120 (86)
- KD1425 (101)
- KS15 (29)
- KT125 (82)
- KT150 (87)
- KT175 (53)
- KT315 (111)
Hand Of Tool
Hand Of Tool
- L (41)
- N (4)
- R (55)
Wiper Insert
Wiper Insert
- N (360)
F Dimension
F Dimension
- 8.875 mm(2)
- 9.0 mm(2)
- 9.398 mm(2)
- 9.525 mm(4)
- 10.875 mm(1)
- 11.0 mm(2)
- 12.5 mm(1)
- 12.57 mm(1)
- 12.573 mm(3)
- 12.624 mm(1)
- 12.7 mm(3)
- 13.0 mm(2)
- 14.27 mm(4)
- 14.275 mm(2)
- 15.88 mm(2)
- 16.0 mm(3)
- 17.0 mm(1)
- 18.923 mm(2)
- 19.05 mm(7)
- 19.43 mm(1)
- 20.0 mm(2)
- 22.0 mm(4)
- 25.0 mm(8)
- 25.4 mm(8)
- 27.0 mm(1)
- 28.45 mm(1)
- 28.575 mm(2)
- 31.75 mm(9)
- 32.0 mm(14)
- 35.0 mm(1)
- 38.1 mm(2)
- 50.8 mm(2)
to
F Dimension
F Dimension
- 0.3494 in(2)
- 0.354 in(2)
- 0.37 in(2)
- 0.375 in(4)
- 0.4281 in(1)
- 0.433 in(2)
- 0.4921 in(1)
- 0.495 in(4)
- 0.497 in(1)
- 0.5 in(3)
- 0.512 in(2)
- 0.562 in(6)
- 0.625 in(2)
- 0.63 in(3)
- 0.669 in(1)
- 0.745 in(2)
- 0.75 in(7)
- 0.765 in(1)
- 0.787 in(1)
- 0.7874 in(1)
- 0.866 in(1)
- 0.8661 in(3)
- 0.984 in(3)
- 0.9843 in(5)
- 1.0 in(8)
- 1.0631 in(1)
- 1.12 in(1)
- 1.125 in(2)
- 1.25 in(9)
- 1.2598 in(7)
- 1.26 in(7)
- 1.378 in(1)
- 1.5 in(2)
- 2.0 in(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 0.6299 in(2)
- 0.6300 in(2)
- 0.6600 in(2)
- 0.6700 in(2)
- 0.7500 in(1)
- 0.7870 in(2)
- 0.7874 in(1)
- 0.9000 in(4)
- 0.9800 in(6)
- 0.9840 in(2)
- 1.0600 in(1)
- 1.2600 in(3)
- 1.3000 in(5)
- 1.5748 in(3)
- 1.5750 in(1)
- 1.7740 in(1)
- 1.8300 in(1)
- 1.9685 in(1)
- 2.0000 in(2)
- 2.1200 in(1)
- 2.4803 in(1)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 16.0000 mm(4)
- 16.7640 mm(2)
- 17.0180 mm(2)
- 19.0500 mm(1)
- 20.0000 mm(3)
- 22.8600 mm(4)
- 24.8900 mm(4)
- 24.8920 mm(2)
- 25.0000 mm(2)
- 26.9200 mm(1)
- 32.0000 mm(3)
- 33.0200 mm(5)
- 40.0000 mm(4)
- 45.0600 mm(1)
- 46.4800 mm(1)
- 50.0000 mm(1)
- 50.8000 mm(2)
- 53.8480 mm(1)
- 63.0000 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 16.764 mm(2)
- 17.018 mm(2)
- 19.05 mm(1)
- 20.0 mm(3)
- 22.86 mm(4)
- 24.89 mm(4)
- 24.892 mm(2)
- 25.0 mm(2)
- 26.92 mm(1)
- 32.0 mm(3)
- 33.02 mm(5)
- 40.0 mm(4)
- 45.06 mm(1)
- 46.48 mm(1)
- 50.0 mm(1)
- 50.8 mm(2)
- 53.848 mm(1)
- 63.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(2)
- 0.63 in(2)
- 0.66 in(2)
- 0.67 in(2)
- 0.75 in(1)
- 0.787 in(2)
- 0.7874 in(1)
- 0.9 in(4)
- 0.98 in(6)
- 0.984 in(2)
- 1.06 in(1)
- 1.26 in(3)
- 1.3 in(5)
- 1.5748 in(3)
- 1.575 in(1)
- 1.774 in(1)
- 1.83 in(1)
- 1.9685 in(1)
- 2.0 in(2)
- 2.12 in(1)
- 2.4803 in(1)
to
Cutting Direction
Cutting Direction
- B (73)
- E (17)
- P (4)
- S (6)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- DOUBLE POSITIVE (5)
- NEGATIVE-ZERO (42)
- NEUTRAL (ZERO) (46)
Maximum Bore Depth
Maximum Bore Depth
- 1.88 in(2)
- 2.0 in(2)
- 2.5 in(2)
- 2.52 in(2)
- 2.832 in(2)
- 3.0 in(8)
- 3.16 in(2)
- 3.75 in(2)
- 3.7758 in(1)
- 3.92 in(3)
- 4.0 in(5)
- 4.5 in(2)
- 5.0 in(2)
- 5.0392 in(1)
- 5.04 in(3)
- 6.0 in(3)
- 6.2992 in(1)
- 7.88 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 48.0 mm(2)
- 50.8 mm(2)
- 63.5 mm(2)
- 64.0 mm(2)
- 72.0 mm(2)
- 76.2 mm(8)
- 80.0 mm(2)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(3)
- 101.6 mm(5)
- 114.3 mm(2)
- 126.8 mm(1)
- 127.0 mm(1)
- 128.0 mm(4)
- 152.4 mm(3)
- 160.0 mm(1)
- 200.0 mm(1)
to
Boring Bar Material
Boring Bar Material
- C (10)
- S (34)
frontEnd
Clamp Style
Clamp Style
- N (100)
Insert Shape
Insert Shape
- D-DIAMOND/RHOMBIC 55 (22)
- K-PARALLELOGRAM 55 (12)
- N/K-PARALLELOGRAM 55 (197)
- V-DIAMOND/RHOMBIC 35 (129)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1162 in(2)
- 0.1212 in(1)
- 0.185 in(1)
- 0.244 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.953 mm(2)
- 3.08 mm(1)
- 4.7 mm(1)
- 6.2 mm(1)
to
insertGeometry
Shape
Shape
- D-DIAMOND/RHOMBIC 55 (17)
- K-PARALLELOGRAM 55 (8)
- N/K-PARALLELOGRAM 55 (141)
- V-DIAMOND/RHOMBIC 35 (94)
Insert IC Size
Insert IC Size
- 4.75 mm(1)
- 6.35 mm(10)
- 9.525 mm(84)
- 12.7 mm(17)
to
Insert IC Size
Insert IC Size
- 0.187 in(1)
- 0.25 in(10)
- 0.375 in(84)
- 0.5 in(17)
to
Cutting Edge Length
Cutting Edge Length
- 11.04 mm(1)
- 11.07 mm(5)
- 11.071 mm(4)
- 11.597 mm(90)
- 11.6 mm(3)
- 11.63 mm(4)
- 15.442 mm(28)
- 15.5 mm(4)
- 15.504 mm(13)
- 16.606 mm(43)
- 16.61 mm(41)
- 17.51 mm(8)
- 22.731 mm(3)
to
Cutting Edge Length
Cutting Edge Length
- 0.435 in(1)
- 0.4359 in(4)
- 0.436 in(5)
- 0.4566 in(90)
- 0.457 in(3)
- 0.458 in(4)
- 0.608 in(28)
- 0.61 in(4)
- 0.6104 in(13)
- 0.6538 in(43)
- 0.654 in(41)
- 0.6894 in(8)
- 0.8949 in(3)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 08 (28)
- 1 (6)
- 15 (73)
- 2 (2)
- 20 (19)
- 25 (9)
- 32 (1)
- FP (48)
- HP (2)
Cutting Tool Material
Cutting Tool Material
- B H (86)
- B L (82)
- D P (108)
- H T (111)
- H W (335)
Tolerance Class
Tolerance Class
- G (197)
- M (32)
- U (31)
backEnd
Connection Type
Connection Type
- BORING BAR (42)
- BORING BAR HEAD (2)
- SQUARE SHANK (56)
Back-End Diameter
Back-End Diameter
- 12.0 mm(4)
- 12.7 mm(5)
- 15.875 mm(4)
- 16.0 mm(3)
- 19.05 mm(7)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(5)
- 31.7 mm(1)
- 31.75 mm(1)
- 32.0 mm(4)
- 38.1 mm(3)
- 40.0 mm(1)
- 50.0 mm(1)
to
Shank Height
Shank Height
- 0.4492 in(2)
- 0.472 in(1)
- 0.5 in(4)
- 0.6067 in(1)
- 0.625 in(3)
- 0.6299 in(1)
- 0.63 in(1)
- 0.75 in(9)
- 0.787 in(5)
- 0.7874 in(5)
- 0.9378 in(3)
- 0.984 in(5)
- 0.9843 in(6)
- 1.0 in(10)
- 1.2134 in(4)
- 1.25 in(2)
- 1.2598 in(2)
- 1.5 in(2)
- 1.5283 in(1)
- 1.8488 in(1)
to
Shank Height
Shank Height
- 11.41 mm(2)
- 12.0 mm(1)
- 12.7 mm(4)
- 15.41 mm(1)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(9)
- 20.0 mm(10)
- 23.82 mm(3)
- 25.0 mm(11)
- 25.4 mm(10)
- 30.82 mm(4)
- 31.75 mm(2)
- 32.0 mm(2)
- 38.1 mm(2)
- 38.82 mm(1)
- 46.96 mm(1)
to
Shank Width
Shank Width
- 0.472 in(1)
- 0.5 in(4)
- 0.625 in(3)
- 0.6299 in(1)
- 0.63 in(1)
- 0.75 in(9)
- 0.787 in(5)
- 0.7874 in(5)
- 0.8646 in(3)
- 0.984 in(5)
- 0.9843 in(8)
- 1.0 in(10)
- 1.1402 in(4)
- 1.25 in(2)
- 1.4551 in(1)
- 1.5 in(2)
- 1.8488 in(1)
to
Shank Width
Shank Width
- 12.0 mm(1)
- 12.7 mm(4)
- 15.875 mm(3)
- 16.0 mm(2)
- 19.05 mm(9)
- 20.0 mm(10)
- 21.96 mm(3)
- 25.0 mm(13)
- 25.4 mm(10)
- 28.96 mm(4)
- 31.75 mm(2)
- 36.96 mm(1)
- 38.1 mm(2)
- 46.96 mm(1)
to
No filters matching ""
